- 17 10月, 2017 7 次提交
-
-
由 Patrice Chotard 提交于
Remove useless local variable "s" and use directly function's parameter "output" Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Christophe Kerello 提交于
As "v" is a local variable in stm32_i2c_choose_solution() "v" has to be copied into "s" to avoid data abort in stm32_i2c_compute_timing(). Signed-off-by: NChristophe Kerello <christophe.kerello@st.com> Reviewed-by: NPatrick DELAUNAY <patrick.delaunay@st.com> Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Masahiro Yamada 提交于
No global pointer is used in this file. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Heinrich Schuchardt 提交于
On qemu errors like assert 2.999650001525879 >= 3 occur. According to the comment in the code the test is meant to be approximate. So we should accept some milliseconds less. Cc: Stephen Warren <swarren@nvidia.com> Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NStephen Warren <swarren@nvidia.com>
-
由 Heinrich Schuchardt 提交于
Update the script to version 0.26 (as of Linux v4.14-rc1) Keep our "penguin_chief". Keep our top_of_kernel_tree. The negative forms of the command line parameters are described when using --help. New options are --git-blame-signatures => when used with --git-blame, also include all commit signers --r => include reviewer(s) if any --letters => print all matching 'letter' types from all matching sections File .get_maintainer.ignore can be used to specify email addressees that shall be ignored. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
- 16 10月, 2017 31 次提交
-
-
由 Praneeth Bajjuri 提交于
'commit fa24eca1 ("omap: Add routine for setting fastboot variables")' adds initial support and usage of "fastboot getvar" command for DRA75x and DRA72x devices. and 'commit 0f9e6aee ("arm: dra76: Add support for ES1.0 detection")' adds initial dra76 device definition This patch is to extend usage of "fastboot getvar" for DRA76 device. Signed-off-by: NPraneeth Bajjuri <praneeth@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Vishal Mahaveer 提交于
DRA71x processors are reduced pin and software compatible derivative of DRA72 processors. Extend support for this revision in "getvar cpu" command. Signed-off-by: NVishal Mahaveer <vishalm@ti.com> [praneeth@ti.com: rebase to u-boot master] Signed-off-by: NPraneeth Bajjuri <praneeth@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Vishal Mahaveer 提交于
Add vendor partition to Android GPT table for eMMC. A Vendor image contains SoC-specific code and configuration. Prior to Android 8.0, the vendor partition was optional ; files belonging to these images were placed in boot.img or system.img with symlinks (such as /vendor >/system/vendor ) when absent. Android 8.0 makes the vendor partition mandatory The goal is to modularize Android partitions with standard interface between the Android Platform (on system.img ) and vendor-provided code(on vendor.img). This standard interface enables the Android Platform to be updated without affecting the SoC partitions. This makes it possible to upgrade a device system.img from Android 8.0 to Android P while other images (such as vendor.img) remain at Android 8.0. This modularity enables timely Android platform upgrades (such as monthly security updates ) without requiring SoC/ODM partners to update SoC- and device-specific code. Signed-off-by: NVishal Mahaveer <vishalm@ti.com> Signed-off-by: NPraneeth Bajjuri <praneeth@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Praneeth Bajjuri 提交于
Add vendor partition to Android GPT table for eMMC. A Vendor image contains SoC-specific code and configuration. Prior to Android 8.0, the vendor partition was optional ; files belonging to these images were placed in boot.img or system.img with symlinks (such as /vendor >/system/vendor ) when absent. Android 8.0 makes the vendor partition mandatory The goal is to modularize Android partitions with standard interface between the Android Platform (on system.img ) and vendor-provided code(on vendor.img). This standard interface enables the Android Platform to be updated without affecting the SoC partitions. This makes it possible to upgrade a device system.img from Android 8.0 to Android P while other images (such as vendor.img) remain at Android 8.0. This modularity enables timely Android platform upgrades (such as monthly security updates ) without requiring SoC/ODM partners to update SoC- and device-specific code. Signed-off-by: NPraneeth Bajjuri <praneeth@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Heinrich Schuchardt 提交于
Fix typos in USB tty driver. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Bin Meng 提交于
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Tom Rini 提交于
As the code currently stands, we first check that the length of the given command line, along with ip_str/mac_str along with an additional 1 for the NULL termination will fit within the buffer we have, and if not, we return an error. The way this code was originally written however left Coverity "unhappy" due to using strcat rather than strncat. Switching this to strncat however causes clang to be unhappy that we aren't enforcing the "1" portion within strncat. Rather than further re-work the code to include a "- 1" in this case as well, make the strcat code only be done within the else side of the length test. This keeps both clang and Coverity happy. Fixes: 48ee0a87 ("cmd/pxe.c: Rework initrd and bootargs handling slightly") Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Masahiro Yamada 提交于
I saw a DT build issue report some time before [1]. I was able to reproduce the bug, and figure out the root cause. Since commit 6d427c6b ("binman: Automatically include a U-Boot .dtsi file"), invalid .*.cmd files are generated. Since that commit, DTS files are put into sed and piped to CPP. Because CPP reads the stream from stdin, -Wp,-MD,$(depfile).pre.tmp option generates a depfile with the target name "-". This is not the format expected by fixdep. Use one more temporary file instead of using pipe. With this, deps_ in the .*.cmd will be fixed. Having a temp file name in source_ is odd, but it is unsed in the build system. Not a big deal. [1] https://lists.denx.de/pipermail/u-boot/2017-June/294451.html Fiexes: 6d427c6b ("binman: Automatically include a U-Boot .dtsi file") Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Tuomas Tynkkynen 提交于
Removal of the legacy DataFlash code turned genimg_get_image() into a no-op. Drop all calls to it and the function itself. Signed-off-by: NTuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
-
由 Tuomas Tynkkynen 提交于
Last user of this option went away in commit: fdc77189 ("board: usb_a9263: Update to support DT and DM") Signed-off-by: NTuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
-
由 Tuomas Tynkkynen 提交于
Last user of this option went away in commit: fdc77189 ("board: usb_a9263: Update to support DT and DM") Signed-off-by: NTuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Acked-by: NWenyou Yang <wenyou.yang@microchip.com>
-
由 Tuomas Tynkkynen 提交于
Last user of this option went away in commit: fdc77189 ("board: usb_a9263: Update to support DT and DM") Signed-off-by: NTuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
-
由 Vagrant Cascadian 提交于
This makes gcc no longer expect an out-of-line version of the functions being present elsewhere. This fixes a failure to build on several marvell targets with gcc-7 on Debian: https://bugs.debian.org/877963Signed-off-by: NAdrian Bunk <bunk@debian.org> Signed-off-by: NVagrant Cascadian <vagrant@debian.org>
-
由 Engling, Uwe 提交于
Hello, I ran into a problem with the JFFS2 filesystem driver implemented in U-Boot. I've got a NAND device that has correctable ECC errors (corrected somewhere in mtd/nand/nand_base.c). The NAND driver tells the filesystem layer (jffs2_1pass.c) above that there occurred correctable ECC errors and returns with a "value > 0". The JFFS2 driver recognizes the corrected ECC errors as real error and skips this block because the only accepts a "return value == 0" as correct. This problem exists for over 8 years (I checked version 2010.09) so I'm a little bit worried that I interpreted something wrong or didn't get the whole context. Can someone confirm this bug (and the bugfix) in the u-boot jffs2 driver? There was a mail in 2012 that mentioned the same problem, but there was no patch: http://u-boot.10912.n7.nabble.com/JFFS2-seems-to-drop-nand-data-with-ECC-corrections-td142008.html Sometime after this discussion the return value of nand_read() changed from -EUCLEAN as correctable ECC error to a positive value with the count of ECC corrected errors. With kind reguards, Uwe Engling
-
由 Tuomas Tynkkynen 提交于
Add brief documentation for the recently merged qemu-arm board. Signed-off-by: NTuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
-
由 Christophe Kerello 提交于
MMC commands like MMC_CMD_ALL_SEND_CID or MMC_CMD_SEND_CSD can reach 500 us. This patch increases the polling status register delay to avoid a timeout on a command. Signed-off-by: NChristophe Kerello <christophe.kerello@st.com> Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrice Chotard 提交于
Fix bit 2 name of PWR_CR3 register to match with the last STM32H7 reference manual available here : http://www.st.com/content/st_com/en/support/resources/ resource-selector.html?querycriteria=productId=SS1951$$ resourceCategory=technical_literature$$resourceType=reference_manual Update also comment about voltage scaling 1 values Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Reviewed-by: NVikas Manocha <vikas.manocha@st.com>
-
由 Patrice Chotard 提交于
CLK() macro is a residue of a previously reworked patch, remove it. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Reviewed-by: NVikas Manocha <vikas.manocha@st.com>
-
由 Tuomas Tynkkynen 提交于
This macro isn't used by anything, and in fact hasn't ever been used according to the Git logs. Signed-off-by: NTuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
-
由 Marek Behún 提交于
Otherwise fs_opendir will fault. Signed-off-by: NMarek Behun <marek.behun@nic.cz>
-
由 Marek Behún 提交于
I accidentaly left a foreign language note in the code from development. Signed-off-by: NMarek Behun <marek.behun@nic.cz>
-
由 Marek Behún 提交于
The variable res should be initialized to 0 in these functions, because if the searched key is not found, the variable is used uninitialized. Reported-by: Coverity (CID: 167335) Reported-by: Coverity (CID: 167336) Reported-by: Coverity (CID: 167337) Signed-off-by: NMarek Behun <marek.behun@nic.cz>
-
由 Marek Behún 提交于
Since rem = ((long) *tim_p) % SECSPERDAY; the second while cycle while (rem >= SECSPERDAY) is dead. Reported-by: Coverity (CID: 167334) Signed-off-by: NMarek Behun <marek.behun@nic.cz>
-
由 Alexander Graf 提交于
The test and info callbacks into the partition callback struct are used by the "part list" command on the command line. That command is used by the distro script. With verb=1 set, "part list" thus throws a lot of warnings about partitions it can't find when an upper layer searches for partitions. So let's reduce verbosity to bring it to the same level of noise as the other partition targets. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Masahiro Yamada 提交于
CONFIG options surrounded by CONFIG_IS_ENABLED(...) CONFIG_IS_BUILTIN(...) CONFIG_IS_MODULE(...) CONFIG_VAL(...) need special care for proper dependency tracking. I do not remember why, but I missed to add CONFIG_VAL(...) handling. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Jon Smith 提交于
All BMP files were being treated as though they had a 40 byte header. There are several BMP header formats consisting of additional data. This was causing some of the header to be read as color information, skewing the color palette. Signed-off-by: NJon Smith <jtsmith@pdiarm.com>
-
由 Diego Dorta 提交于
When compiling with W=1 the following warning is observed: arch/arm/mach-imx/mx6/soc.c:590:6: warning: no previous prototype for ‘s_init’ [-Wmissing-prototypes] void s_init(void) Remove this warning by adding the function prototype into include/common.h file. Signed-off-by: NDiego Dorta <diego.dorta@nxp.com>
-
由 Mirza, Taimoor 提交于
fit_handle_file function does not quote input and output files while preparing command to run DTC to convert .its to .itb. This results in a failure if input or output files contain spaces in their names. Quote input and output files in DTC command to avoid this failure. Signed-off-by: NMirza, Taimoor <Taimoor_Mirza@mentor.com>
-
由 Alexander Graf 提交于
Upstream Linux has received a few device tree updates to the RPi which we should propagate into the builtin U-Boot one as well to gain hardware support. This patch bumps the dts files to their 4.14 Linux counterparts with the exception of sdhost on 32bit RPi versions. There we stay with iproc as the sdhost driver is missing in U-Boot. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Tom Rini 提交于
While this goes somewhat against normal coding style we should ensure that dev_desc is not NULL before we dereference it in allocation of legacy_mbr. Reported-by: Coverity (CID: 167292) Signed-off-by: NTom Rini <trini@konsulko.com>
-
Remove depends on TI_SECURE_DEVICE for other platforms. Signed-off-by: NVasily Gurevich <ext-vasily.gurevich@vaisala.com>
-
- 15 10月, 2017 2 次提交
-
-
由 Masahiro Yamada 提交于
This allows the NAND driver to enable clock and get its clock rate. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
Enable clock in the probe hook. The clock rate will be necessary when setup_data_interface hook is supported. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-