- 11 3月, 2007 2 次提交
-
-
由 Michal Simek 提交于
timer support interrupt controller support flash support ethernet support cache support board information support env support booting image support adding support for Xilinx ML401
-
由 Michal Simek 提交于
timer support interrupt controller support flash support ethernet support cache support board information support env support booting image support adding support for Xilinx ML401
-
- 02 3月, 2007 4 次提交
-
-
由 Stefan Roese 提交于
-
由 Stefan Roese 提交于
-
由 Stefan Roese 提交于
This patch updates the recently added Katmai board support. The biggest change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2 driver. Please note, that still some problems are left with some memory configurations. See the driver for more details. Signed-off-by: NStefan Roese <sr@denx.de>
- 01 3月, 2007 1 次提交
-
-
由 Stefan Roese 提交于
Signed-off-by: NStefan Roese <sr@denx.de>
-
- 28 2月, 2007 2 次提交
-
-
由 Wolfgang Denk 提交于
-
由 Sergei Poselenov 提交于
- fix logic error in image type handling - make sure file system images (cramfs etc.) get stored in flash with image header stripped so they can be mounted through MTD
-
- 27 2月, 2007 2 次提交
-
-
由 Wolfgang Denk 提交于
-
由 Sergei Poselenov 提交于
-
- 22 2月, 2007 2 次提交
-
-
由 Stefan Roese 提交于
Since the relocation fix is not included yet and we're not sure how it will be added, this patch removes code that required relocation to be fixed for now. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
As suggested by Grant Likely this patch enables the Xilinx SystemACE driver to select 8 or 16bit mode upon startup. Signed-off-by: NStefan Roese <sr@denx.de>
-
- 21 2月, 2007 4 次提交
-
-
由 Haiying Wang 提交于
Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command is fully finished. The sync() is defined in each CPU's io.h file. For those CPUs which do not need sync for now, a dummy sync() is defined in their io.h as well. Signed-off-by: NHaiying Wang <Haiying.Wang@freescale.com>
-
由 Stefan Roese 提交于
Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
-
- 20 2月, 2007 20 次提交
-
-
由 Stefan Roese 提交于
This patch enables the "new" get_dev() function for block devices introduced by Grant Likely to be used on systems that still suffer from the relocation problems (manual relocation neede because of problems with linker script). Hopefully we can resolve this relocation issue soon for all platform so we don't need this additional code anymore. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
This patch removes some problems when the Xilinx SystemACE driver is used with 16bit access on an big endian platform (like the AMCC Katmai). Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
-
由 Stefan Roese 提交于
Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
This patch switches to the desired I2C bus when the date/dtt commands are called. This can be configured using the CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
This patch adds support for the DDR2 controller used on the 440SP and 440SPe. It is tested on the Katmai (440SPe) eval board and works fine with the following DIMM modules: - Corsair CM2X512-5400C4 (512MByte per DIMM) - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM) - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM) This patch also adds the nice functionality to dynamically create the TLB entries for the SDRAM (tlb.c). So we should never run into such problems with wrong (too short) TLB initialization again on these platforms. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
Since the existing 4xx SPD SDRAM initialization routines for the 405 SDRAM controller and the 440 DDR controller don't have much in common this patch splits both drivers into different files. This is in preparation for the 440 DDR2 controller support (440SP/e). Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
This patch adds support for multiple I2C busses on the PPC4xx platforms. Define CONFIG_I2C_MULTI_BUS in the board config file to make use of this feature. It also merges the 405 and 440 i2c header files into one common file 4xx_i2c.h. Also the 4xx i2c reset procedure is reworked since I experienced some problems with the first access on the 440SPe Katmai board. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Grant Likely 提交于
Block device read/write is anonymous data; there is no need to use a typed pointer. void * is fine. Also add a hook for block_read functions Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Grant Likely 提交于
Preparation for future patches which support block device writing Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Grant Likely 提交于
Register read/write does not need to be wrapped in a full function. The patch replaces them with macros. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Grant Likely 提交于
The code in this file is not a command; it is a device driver. Put it in the correct place. There are zero functional changes in this patch, it only moves the file. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Grant Likely 提交于
This patch is in preparation of additional changes to the sysace driver. May as well take this opportunity to fixup the inconsistent whitespace since this file is about to undergo major changes anyway. There are zero functional changes in this patch. It only cleans up the the whitespace. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Grant Likely 提交于
isprint is already defined in ctype.c Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Grant Likely 提交于
Printing a buffer is a darn useful thing. Move the buffer print code into print_buffer() in lib_generic/ Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Grant Likely 提交于
Change the xilinx device drivers and board code to include config.h instead of xparameters.h directly. config.h always includes the correct xparameters file. This change reduces the posibility of including the wrong file when adding a new xilinx board port Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Grant Likely 提交于
Each of the filesystem drivers duplicate the get_dev routine. This change merges them into a single function in part.c Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Wolfgang Denk 提交于
as root file system images.
-
- 19 2月, 2007 2 次提交
-
-
由 Sergei Poselenov 提交于
Update / extend Software Update Mechanism for MCC200 board: - Add support for rootfs image added. The environment variables "rootfs_st" and "rootfs_nd" can be used to override the default values of the image start and end. - Remove excessive key check code. - Code cleanup.
-
由 Stefan Roese 提交于
As spotted by Matthias Fuchs, the READY input should not be enabled for the NOR FLASH on the Sequoia board. Signed-off-by: NStefan Roese <sr@denx.de>
-
- 17 2月, 2007 1 次提交
-
-
由 Wolfgang Denk 提交于
-