TCG PC Client PFP spec requires to measure the secure
boot policy before validating the UEFI image.
This commit adds the secure boot variable measurement
of "SecureBoot", "PK", "KEK", "db", "dbx", "dbt", and "dbr".

Note that this implementation assumes that secure boot
variables are pre-configured and not be set/updated in runtime.
Signed-off-by: NMasahisa Kojima <masahisa.kojima@linaro.org>

Add the Linux magic to the EFI file header to allow running our test
programs with GRUB's linux command.

MajorImageVersion = 1 indicates a kernel that can consume the
EFI_LOAD_FILE2_PROTOCOL. This allows to dump the GRUB provided intird with
our initrddump.efi tool.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

iPXE used Uri() device path nodes. So we should support them in the
device path to text protocol.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

With device tree binding migration to yaml it is difficult to synchronize
the binding from Linux kernel to U-Boot.

Instead of maintaining the same dt bindings, this patch adds in the U-Boot
documentation the path to the device tree bindings in Linux kernel for
STMicroelectronics devices, when they are used without modification.
Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: NPatrice Chotard <patrice.chotard@foss.st.com>

Add links for referenced text files.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

This question comes up every now and then with people coming from Linux.
Add some notes about it so we can point to it in the mailing list.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

This file is about 10 years old and the updates have not covered
everything that has changed, particularly in the last few years. Update
the information and add mention of the u-boot.dtsi files.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Fix typos.
Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Move this to rST format, largely unchanged to start with. Add an index
for this topic, as well as an empty intro.

Note this patch does not include updates! Is it just a conversion to the
new format. See the next patch.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NHeinrich Schuchart <xypron.glpk@gmx.de>

Adjust the Latex formatting to match Linux v5.13.1:

* add Latex margins
* reformat the code in doc/conf.py to match Linux
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Require Sphinx 2.44 to build the documentation.
Remove all code related to earlier versions.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

tools/Makefile uses pkg-config.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

- Enable SeaBIOS support for Crown Bay
- Update SeaBIOS build instructions in the x86 doc
- Enable CONFIG_SPI_FLASH_SMART_HWCAPS for Crown Bay

Now that the spi-nor fix has been made in u-boot/master via:

  commit 87e7219f ("mtd: spi-nor: Respect flash's hwcaps in spi_nor_adjust_hwcaps()")

enable CONFIG_SPI_FLASH_SMART_HWCAPS on Intel Crown Bay again.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Update SeaBIOS build instructions using exact command that involves
"make olddefconfig", and mention SeaBIOS release 1.14.0 has been
used for testing.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Enable SeaBIOS support for any kernel that requires legacy BIOS
services.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

- Add Rockchip SFC driver support;
- DTS sync from kernel;
- emmc hs400 support for rk3399;
- Fix for spinore bootdevice and MMC boot order;

Make px30 SFC clock configurable
Signed-off-by: NJon Lin <jon.lin@rock-chips.com>
Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

The Odroid Go Advance uses a Rockchip Serial Flash Controller with an
XT25F128B SPI NOR flash chip. This adds support for both. Note that
while both the controller and chip support quad mode, only two lines
are connected to the chip. Changing the pinctrl to bus2 and setting tx
and rx lines to 2 for this reason.
Signed-off-by: NChris Morgan <macromorgan@hotmail.com>
Signed-off-by: NJon Lin <jon.lin@rock-chips.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

Adds support for XT25F128B used on Odroid Go Advance. Unfortunately
this chip uses a continuation code which I cannot seem to parse, so
there are possibly going to be collisions with chips that use the same
manufacturer/ID.
Signed-off-by: NChris Morgan <macromorgan@hotmail.com>
Signed-off-by: NJon Lin <jon.lin@rock-chips.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

Add the serial flash controller to the devicetree for the PX30.
Signed-off-by: NChris Morgan <macromorgan@hotmail.com>
Signed-off-by: NJon Lin <jon.lin@rock-chips.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

This patch adds support for setting the correct pin configuration
for the Rockchip Serial Flash Controller found on the PX30.
Signed-off-by: NChris Morgan <macromorgan@hotmail.com>
Signed-off-by: NJon Lin <jon.lin@rock-chips.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

This patch adds support for the Rockchip serial flash controller
found on the PX30 SoC. It should work for versions 3-5 of the SFC
IP, however I am only able to test it on v3.

This is adapted from the WIP SPI-MEM driver for the SFC on mainline
Linux. Note that the main difference between this and earlier versions
of the driver is that this one does not support DMA. In testing
the performance difference (performing a dual mode read on a 128Mb
chip) is negligible. DMA, if used, must also be disabled in SPL
mode when using A-TF anyway.
Signed-off-by: NChris Morgan <macromorgan@hotmail.com>
Signed-off-by: NJon Lin <jon.lin@rock-chips.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

Currently there are a few arm32 rockchip board configs that don't
generate u-boot-rockchip.bin when running make because CONFIG_BINMAN
is not enabled. This patch changes CONFIG_ARCH_ROCKCHIP to also select
CONFIG_BINMAN if CONFIG_SPL and !CONFIG_ARM64.

Example builds that don't generate u-boot-rockchip.bin without this
patch:

export ARCH=arm
export CROSS_COMPILE=/usr/bin/arm-linux-gnueabihf-
make kylin-rk3036_defconfig
make

export ARCH=arm
export CROSS_COMPILE=/usr/bin/arm-linux-gnueabihf-
make rock_defconfig
make

export ARCH=arm
export CROSS_COMPILE=/usr/bin/arm-linux-gnueabihf-
make tinker-rk3288_defconfig
make
Signed-off-by: NJohan Gunnarsson <johan.gunnarsson@gmail.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

Sync the rk3368 DTs and associated bits from 5.14-rc1.
Signed-off-by: NPeter Robinson <pbrobinson@gmail.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

Sync the rk3328 DTs and associated bits from 5.14-rc1.
Signed-off-by: NPeter Robinson <pbrobinson@gmail.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

Sync the rk3399 DTs and associated bits from 5.14-rc1.
Signed-off-by: NPeter Robinson <pbrobinson@gmail.com>
(Remove the conflict content for vmarc-som)
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>

- Some CFI flash related fixups (Kconfig & header) (Bin)
- Enable CFI flash support on the QEMU RISC-V virt machine. (Bin)

- Convert GoFlex Home Ethernet and SATA to Driver Model (Tony)
- mvebu: Automatically detect CONFIG_SYS_TCLK (Pavel)
- mvebu: sata_mv: Fix HDD identication during cold start (Tony)
- a37xx: pci: Fix handling PIO config error responses (Pavel)
- Other minor misc changes and board maintainer updates

- odroid-n2: fix fdtfile suffix for n2-plus
- sei610 & meson64_android cleanups to prepare android 11 boot support
- use Android BCB mechanism for reboot reason instead of HW reboot flag
- Switch meson64_android boot flow to use abootimg for A/B, AVB and DTBO support

Remove the recommended MAC address from the network card.
NanoPi R4S has a EEPROM attached to the 2nd I2C bus (U92), which stores the MAC address.
Signed-off-by: Xiaobo Tian <peterwillcn@gmail.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

The host-index-min property is invalid,
so it inherits from the sdmmc definition in dtsi.
Signed-off-by: Xiaobo Tian <peterwillcn@gmail.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

Correct the LEDS label name and remove the board type prefix,
which is actually unnecessary here, removes the redefined system status LED pin.
Signed-off-by: Xiaobo Tian <peterwillcn@gmail.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

This enable hs400 and SDMA support for emmc on evb-rk3399.
Signed-off-by: NYifeng Zhao <yifeng.zhao@rock-chips.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

This patch adds support for the RK3568 platform to this driver.
Signed-off-by: NYifeng Zhao <yifeng.zhao@rock-chips.com>
Reviewed-by: NJaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

Add clock, phy and other configuration, it is convenient to support
new controller. Here a short summary of the changes:
- Add mmc_of_parse to parse dts config.
- Remove OF_PLATDATA related code.
- Reorder header inclusion.
- Add phy ops.
- add ops set_ios_post to modify the parameters of phy when the
  clock changes.
- Add execute tuning api for hs200 tuning.
Signed-off-by: NYifeng Zhao <yifeng.zhao@rock-chips.com>
Reviewed-by: NJaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

In the Linux DT the file rk3xxx.dtsi is shared between
rk3066 and rk3188. Both rk3xxx.dtsi and rk3188.dtsi have recently
had some updates.
For a future rk3066 support in U-boot this file must also update.
Move U-boot specific things in a rk3188-radxarock-u-boot.dtsi file.
Signed-off-by: NJohan Jonker <jbx6244@gmail.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

In the Linux DT the file rk3xxx.dtsi is shared between
rk3066 and rk3188. Both rk3xxx.dtsi and rk3188.dtsi have recently
had some updates.
For a future rk3066 support in U-boot this file must also update.
Move U-boot specific things in a rk3188-u-boot.dtsi file.
Signed-off-by: NJohan Jonker <jbx6244@gmail.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

In order to update the DT for rk3188
sync the power domain dt-binding header.
This is the state as of v5.12 in Linux.
Signed-off-by: NJohan Jonker <jbx6244@gmail.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

In the Linux DT the file rk3xxx.dtsi is shared between
rk3066 and rk3188. This file has recently had some updates.
For a future rk3066 support in U-boot this file must also update.
Move U-boot specific things in a rk3xxx-u-boot.dtsi file.
Signed-off-by: NJohan Jonker <jbx6244@gmail.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

In order to update the DT for rk3066 and rk3188
sync the clock dt-binding header.
This is the state as of v5.12 in Linux.
Signed-off-by: NJohan Jonker <jbx6244@gmail.com>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

Problem: board_spl_was_booted_from return wrong boot_devices[3] value
/spi@ff1d0000 and same-as-spl dont work properly for SPINOR flash
because arch/arm/mach-rockchip/spl-boot-order.c spl_node_to_boot_device
need parse SPINOR flash node as UCLASS_SPI_FLASH

spl-boot-order: same-as-spl > *** BOOT_SOURCE_ID 3 (2:emmc 3:spi 5:sd ...
/spi@ff1d0000 > board_boot_order: could not map node @618 to a boot-device
/sdhci@fe330000 > /mmc@fe320000

Solution: just change it to /spi@ff1d0000/flash@0

spl-boot-order: same-as-spl > *** BOOT_SOURCE_ID 3 (2:emmc 3:spi 5:sd ...
/spi@ff1d0000/flash@0 > /sdhci@fe330000 > /mmc@fe320000
Signed-off-by: NArtem Lapkin <art@khadas.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>