Add support for splash screen on both DVI and SCF0403 LCD.
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Reviewed-by: NTom Rini <trini@ti.com>

Add both EMAC and SMC911x support.
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Reviewed-by: NTom Rini <trini@ti.com>

Add both host and mUSB support.
Currently, the selection between host USB and mUSB is done through the
config file.
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Reviewed-by: NTom Rini <trini@ti.com>

CompuLab cm-t3517 is Computer on Module (CoM) based on AM3517 SoC.
Features: up to 256MB DDR2, up to 512MB NAND, USB hub, mUSB, WiFi, BT,
Analog audio codec, touch screen controller, LED.

Add basic support including:
LED, Serial console, NAND, MMC, GPIO, I2C, 256MB DRAM.
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>

Switch the default CD GPIO polarity to active low.

The current hsmmc driver assumption that the CD GPIO is active high, but
in the real hardware, usually the opposite holds.
The usual SD card socket has a mechanical switch which is grounded as
soon as a card is inserted.
Of course there might be some board logic which inverts the signal, but
as far as current users are concerned, there is no such logic.

Current U-Boot users either not using the CD functionality, or have a
different way (e.g. external to SoC GPIO controller) for checking the
card presence.

This patch also brings the polarity assumption in line with the Linux
kernel and adds appropriate comments.

This patch also might spare issues once the TWL GPIO driver will be
converted to the DM.
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Dmitry Lifshitz <lifshitz@compulab.co.il>
Reviewed-by: NTom Rini <trini@ti.com>

The fallback is used for cases when CONFIG_SERIAL_TAG defined, but the
eeprom is not used.
The fallback is useful for more than one CompuLab board, so move it to a
common location.
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Reviewed-by: NTom Rini <trini@ti.com>

Extract the SMC911x initialization code to a common location where it
can be reused by other compulab omap3 based boards.
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Reviewed-by: NTom Rini <trini@ti.com>

The splash screen loading code can be reused by other compulab boards.
For now extract it to a common location for further reuse.

This also switches the splash code dependency from CONFIG_LCD to
CONFIG_SPLASH_SCREEN as it should normally be.

In addition this patch fixes the accidental dependency of the
get_board_mem_timings() function on CONFIG_LCD, by just moving the
splash code and leaving the above function intact.
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Reviewed-by: NTom Rini <trini@ti.com>

Extract the USB hub reset code to a common location where it can be
reused by other compulab boards.
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Reviewed-by: NTom Rini <trini@ti.com>

Move board revision handling code to a common location
for further reuse.
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Reviewed-by: NTom Rini <trini@ti.com>

Current get_board_rev() function returns a hard coded value which is
obviously incorrect for the majority of boards.
Allow boards to provide a correct implementation by making this
function weak.
In addition open code the trivial and useless BOARD_REV_ID define and
adjust the comment.
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Cc: Tom Rini <trini@ti.com>

disable internal delay through gmii_sel register, as this
is done in the ar8031 phy.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Cc: Tom Rini <trini@ti.com>

There is no reason to sprintf simple string.
Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>

The keystone2 evm can boot from USB partition with FAT32 FS, so
enable generic load command and fatload command usage.
Acked-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
Reviewed-by: NTom Rini <trini@ti.com>

The Multicore Software Development Kit (MCSDK) provides foundational
software for TI KeyStone II device platforms. It's supposed to be used
with uboot, and it's convenient to have the same names for images, so
correct environment image names according to the last MCSDK3.
Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
Reviewed-by: NTom Rini <trini@ti.com>

Currently to customize env for various ks2 boards, individual
variables such as NAME_FS etc are defined and included in the
common config.h to define CONFIG_EXTRA_ENV_SETTINGS. This
doesn't scale well if a variable is not applicable on a
specific board. Using this scheme, we have to define variables
with empty value and it's ugly. Instead, to allow board specific
customization of default env variable, define a common
CONFIG_EXTRA_ENV_KS2_SETTINGS for all common variables and define
board specific variables in individual board specific config.h
using CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS. Use the common and board
specific variables to define CONFIG_EXTRA_ENV_SETTINGS. This way
more variables can be added in future for individual boards
without affecting the other config.h files.
Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
Reviewed-by: NTom Rini <trini@ti.com>

The verification qm_cfg existence is done at ksnav_init().
So, there is no need to verify it after initialization.
Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
Reviewed-by: NTom Rini <trini@ti.com>

To allow out of box demo, change default boot mode to ubi
boot now that NAND is functional in latest EVMs.
Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
Reviewed-by: NTom Rini <trini@ti.com>

The UBI volume name has to be prefixed with "ubi:".
Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
Reviewed-by: NTom Rini <trini@ti.com>

ARM: TI: omap3: remove raw initrd support in omap3_igep00x0 config file since it is now in ti_armv7_common.h
Signed-off-by: NGuillaume GARDET <guillaume.gardet@free.fr>
Cc: Tom Rini <trini@ti.com>
Reviewed-by: NTom Rini <trini@ti.com>

Signed-off-by: NGuillaume GARDET <guillaume.gardet@free.fr>
Cc: Tom Rini <trini@ti.com>
Reviewed-by: NTom Rini <trini@ti.com>

As per Marvell Release Notes - Alaska 88E1510/88E1518/88E1512/88E1514
Rev A0, Errata Section 3.1 Marvell PHY has an errata which requires
that certain registers get written in order to restart
autonegotiation.
Signed-off-by: NHao Zhang <hzhang@ti.com>
Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
Reviewed-by: NStefan Roese <sr@denx.de>

Currently Keystone2 Lamar evm (K2L) board is added, so update
Keystone2 readme file to have such one.
Acked-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>

This patch adds network support code and enables keystone_net
driver usage for k2l_evm evaluation board.
Acked-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NHao Zhang <hzhang@ti.com>
Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>

The Keystone2 Lamar SoC uses the same keystone net driver.
This patch adds opportunity to use it by K2L SoCs.
Acked-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>

Keystone2 Lamar SoC uses the same keystone SerDes driver.
All Keystone2 EVM boards currently use SerDes driver, so move
CONFIG_TI_KEYSTONE_SERDES to common configuration file.
Acked-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>

The Keystone2 Lamar SoC uses the same keystone navigator.
Move queue numbers to common hardware file, as all Keystone2 SoCs
have the same ones.
Acked-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>

Signed-off-by: NDileep Katta <dileep.katta@linaro.org>
[trini: Rework so that am335x_evm_usbspl still builds]
Signed-off-by: NTom Rini <trini@ti.com>

Signed-off-by: NPaul Kocialkowski <contact@paulk.fr>

Signed-off-by: NTom Rini <trini@ti.com>

Make enabling support for NOR (and describe where it's seen) be done via
Kconfig.
Signed-off-by: NTom Rini <trini@ti.com>

The 1GB DRAM configuration on mx6 solo uses 2 chip selects, but
the code tests 1GB DRAM configuration as if it is all present on one
chip select, and thus cannot see the full range of available memory.

Refactor the check to detect 1GB DRAM correctly.
Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: NIgor Grinberg <grinberg@compulab.co.il>

Change the order in which GPIOs are toggled in SATA init sequence to
accomodate both SanDisk and Phison SSDs.
Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: NIgor Grinberg <grinberg@compulab.co.il>

This is necessary for the device-model enabled builds to work properly.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NSimon Glass <sjg@chromium.org>

This is necessary for the device-model enabled builds to work properly.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NSimon Glass <sjg@chromium.org>