- 29 10月, 2020 5 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Andre Przywara 提交于
Maxime mentioned that he feels not having the time to be an Allwinner maintainer anymore. Take over from him. Maxime, many thanks for your great work in the past! I hope I can still relay the occasional technical question to you in the future. Acked-by: NMaxime Ripard <mripard@kernel.org> Signed-off-by: NAndre Przywara <andre.przywara@arm.com>
-
https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq由 Tom Rini 提交于
- Bug fixes and updates on vid, ls1088a lx2160a and other layerscape platforms. - Add optee_rpmb support for LX2 & Kontron sl28 support
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
- Add a framework for mux drivers
-
- 28 10月, 2020 19 次提交
-
-
由 Pratyush Yadav 提交于
Tests tests run the three mux subcommands: list, select, and deselect, and verify that the commands do what we expect. Signed-off-by: NPratyush Yadav <p.yadav@ti.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Pratyush Yadav 提交于
This command lets the user list, select, and deselect mux controllers introduced with the mux framework on the fly. It has 3 subcommands: list, select, and deselect. List: Lists all the mux present on the system. The muxes are listed for each chip. The chip is identified by its device name. Each chip can have a number of mux controllers. Each is listed in sequence and is assigned a sequential ID based on its position in the mux chip. It lists details like ID, whether the mux is currently selected or not, the current state, the idle state, and the number of states. A sample output would look something like: => mux list a-mux-controller: ID Selected Current State Idle State Num States 0 no unknown as-is 0x4 1 no 0x2 0x2 0x10 2 no 0x73 0x73 0x100 another-mux-controller: ID Selected Current State Idle State Num States 0 no 0x1 0x1 0x4 1 no 0x2 0x2 0x4 Select: Selects a given mux and puts it in the specified state. This subcommand takes 3 arguments: mux chip, mux ID, state to set the mux in. The arguments mux chip and mux ID are used to identify which mux needs to be selected, and then it is selected to the given state. The mux needs to be deselected before it can be selected again in another state. The state should be a hexadecimal number. For example: => mux list a-mux-controller: ID Selected Current State Idle State Num States 0 no 0x1 0x1 0x4 1 no 0x1 0x1 0x4 => mux select a-mux-controller 0 0x3 => mux list a-mux-controller: ID Selected Current State Idle State Num States 0 yes 0x3 0x1 0x4 1 no 0x1 0x1 0x4 Deselect: Deselects a given mux and puts it in its idle state. This subcommand takes 2 arguments: the mux chip and mux ID to identify which mux needs to be deselected. So in the above example, we can deselect mux 0 using: => mux deselect a-mux-controller 0 => mux list a-mux-controller: ID Selected Current State Idle State Num States 0 no 0x1 0x1 0x4 1 no 0x1 0x1 0x4 Signed-off-by: NPratyush Yadav <p.yadav@ti.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Jean-Jacques Hiblot 提交于
Provide tests to check the behavior of the multiplexer framework. Two sets of tests are added. One is using an emulated multiplexer driver that can be used to test basic functionality like select, deselect, etc. The other is using the mmio mux which adds tests specific to it. Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: NPratyush Yadav <p.yadav@ti.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Pratyush Yadav 提交于
The memory is close to full and adding a syscon node in test.dts makes it go over the limit and makes malloc() fail on startup. Signed-off-by: NPratyush Yadav <p.yadav@ti.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Jean-Jacques Hiblot 提交于
This adds a driver for mmio-based syscon multiplexers controlled by bitfields in a syscon register range. This is heavily based on the linux mmio-mux driver. Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NPratyush Yadav <p.yadav@ti.com>
-
由 Jean-Jacques Hiblot 提交于
This will probe the multiplexer devices that have a "u-boot,mux-autoprobe" property. As a consequence they will be put in their idle state. Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NPratyush Yadav <p.yadav@ti.com>
-
由 Jean-Jacques Hiblot 提交于
Add a new subsystem that handles multiplexer controllers. The API is the same as in Linux. Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NPratyush Yadav <p.yadav@ti.com> [trini: Update some error calls to use different functions or pass correct arguments] Signed-off-by: NTom Rini <trini@konsulko.com>
-
https://gitlab.denx.de/u-boot/custodians/u-boot-efi由 Tom Rini 提交于
Pull request for UEFI sub-system for efi-2021-01-rc2 A software RTC driver is supplied for UEFI SCT testing. The following UEFI related bugs are fixed: * correct handling of daylight saving time in GetTime() and SetTime() * handling of the gd register in function tracing on RISC-V * disable U-Boot devices in ExitBootServices()
-
由 Tom Rini 提交于
- Allow for log message continuation. - Test fix, build time error checking for new categories
-
由 Heinrich Schuchardt 提交于
The log command has led to NULL dereferences if an unknown category name name was used due to missing entries in the list of category names. Add compile time checks for the array sizes of log_cat_name and log_lvl_name to avoid future mishaps. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Heinrich Schuchardt 提交于
Adjust the SetTime() and GetTime() runtime services to correctly convert the daylight saving time information when communicating with the RTC. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Ilias Apalodimas 提交于
U-Boot Driver Model is supposed to remove devices with either DM_REMOVE_ACTIVE_DMA or DM_REMOVE_OS_PREPARE flags set, before exiting. Our bootm command does that by explicitly calling calling "dm_remove_devices_flags(DM_REMOVE_ACTIVE_ALL);" and we also disable any USB devices. The EFI equivalent is doing none of those at the moment. As a result probing an fTPM driver now renders it unusable in Linux. During our (*probe) callback we open a session with OP-TEE, which is supposed to close with our (*remove) callback. Since the (*remove) is never called, once we boot into Linux and try to probe the device again we are getting a busy error response. Moreover all uclass (*preremove) functions won't run. So let's fix this by mimicking what bootm does and disconnect devices when efi_exit_boot_services() is called. Signed-off-by: NIlias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Ilias Apalodimas 提交于
Order header files according to https://www.denx.de/wiki/U-Boot/CodingStyleSuggested-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NIlias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
An UEFI application may change the value of the register that gd lives in. But some of our functions like get_ticks() access this register. So we have to set the gd register to the U-Boot value when entering a trace point and set it back to the application value when exiting the trace point. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
On a board without hardware clock this software real time clock can be used. The build time is used to initialize the RTC. So you will have to adjust the time either manually using the 'date' command or use the 'sntp' to update the RTC with the time from a network time server. See CONFIG_CMD_SNTP and CONFIG_BOOTP_NTPSERVER. The RTC time is advanced according to CPU ticks. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Provide a constant U_BOOT_EPOCH with the number of seconds since 1970-01-01. This constant can be used to initialize a software real time clock until it is updated via the 'sntp' command. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Provide a unit test checking that a continuation message will use the same log level and log category as the previous message. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Heinrich Schuchardt 提交于
Some drivers use macro pr_cont() for continuing a message sent via printk. Hence if we want to convert printk messaging to using the logging system, we must support continuation of log messages too. As pr_cont() does not provide a message level we need a means of remembering the last log level. With the patch a pseudo log level LOGL_CONT as well as a pseudo log category LOGC_CONT are introduced. Using these results in the application of the same log level and category as in the previous log message. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Heinrich Schuchardt 提交于
Replace the static variable processing_msg by a field in the global data. Make the field bool at it can only be true or false. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 27 10月, 2020 14 次提交
-
-
由 Anatolij Gustschin 提交于
With disabled legacy VIDEO option CONSOLE_MUX is not auto-selected any more, re-enable it. Fixes: 9dec5a0e ("nokia_rx51: disable obsolete VIDEO config") Signed-off-by: NAnatolij Gustschin <agust@denx.de> Reviewed-by: NPali Rohár <pali@kernel.org>
-
https://gitlab.denx.de/u-boot/custodians/u-boot-video由 Tom Rini 提交于
- disable CONFIG_VIDEO to remove DM conversion warnings for boards: at91sam9, eb_cpu5282, ls1021aqds, ls1021atwr, mx23evk, mx6sxsabresd, mx7dsabresd, nokia_rx51, picosam9g45, sansa_fuze_plus, xfi3
-
由 Anatolij Gustschin 提交于
Disable VIDEO config to fix DM_VIDEO conversion deadline warning. Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Anatolij Gustschin 提交于
Remove CONFIG_VIDEO dependency to fix board removal warnings. Signed-off-by: NAnatolij Gustschin <agust@denx.de> Cc: Jens Scharsig <esw@bus-elektronik.de>
-
由 Anatolij Gustschin 提交于
DM_VIDEO conversion deadline has passed, disable VIDEO config. Signed-off-by: NAnatolij Gustschin <agust@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com>
-
由 Anatolij Gustschin 提交于
DM_VIDEO conversion deadline has passed, disable VIDEO config. Signed-off-by: NAnatolij Gustschin <agust@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com>
-
由 Anatolij Gustschin 提交于
DM_VIDEO conversion deadline has passed, disable VIDEO config. Signed-off-by: NAnatolij Gustschin <agust@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br>
-
由 Anatolij Gustschin 提交于
DM_VIDEO conversion deadline has passed, disable VIDEO config. Boards should convert to DM_VIDEO if they need video console support. Signed-off-by: NAnatolij Gustschin <agust@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com>
-
由 Anatolij Gustschin 提交于
DM_VIDEO conversion deadline has passed, disable VIDEO config. Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Anatolij Gustschin 提交于
DM_VIDEO conversion deadline has passed, disable VIDEO config. Signed-off-by: NAnatolij Gustschin <agust@denx.de> Cc: Erik van Luijk <evanluijk@interact.nl>
-
由 Anatolij Gustschin 提交于
DM_VIDEO conversion deadline has passed, disable VIDEO config. Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Anatolij Gustschin 提交于
DM_VIDEO conversion deadline has passed, disable VIDEO config. Signed-off-by: NAnatolij Gustschin <agust@denx.de> Cc: Alison Wang <alison.wang@nxp.com>
-
由 Anatolij Gustschin 提交于
DM_VIDEO conversion deadline has passed, disable VIDEO config. Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Anatolij Gustschin 提交于
DM_VIDEO conversion deadline has passed, disable VIDEO config. Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
- 26 10月, 2020 2 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-riscv由 Tom Rini 提交于
- No need to check before free in kendryte clk. - Only enable OF_BOARD_FIXUP if U-Boot is configured for S-Mode. - Reduce k210 dts DMA block size - Move timers into drivers/timer - Correct fu540 dts reg size of clint node
-
由 Pragnesh Patel 提交于
Signed-off-by: NPragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: NBin Meng <bin.meng@windriver.com> Reviewed-by: NRick Chen <rick@andestech.com>
-