- 09 11月, 2021 39 次提交
-
-
由 Michael Walle 提交于
The driver will look for a named resource "ecc-addr", but this isn't the official binding. In fact, the official device tree binding documentation doesn't mention any resource names at all. But it is safe to assume that it's the linux ones we have to use if we want to be compatible with the linux device tree. Thus rename "ecc-addr" to "sata-ecc" and convert all the users in u-boot. While at it, also rename "sata-base" to "ahci" although its not used at all. This change doesn't affect the SATA controller on the ZynqMP. Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
The official ls1028a binding of the driver uses the following as compatibles: compatible = "fsl,ls1028a-lpuart"; Add the missing compatible to the driver and update the device tree. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
The official devicetree bindings specifies spi-num-chipselects as the name. Use it. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
The official ls1028a binding of the driver uses the following as compatibles: compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi"; Add the missing compatible to the driver and update the device tree. We can use the fallback "fsl,ls1021a-v1.0-dspi", because the endianness is determined by the little-endian property and not by the compatible string itself. Further, we won't need and specific details on the DMA configuration (which is different on the LS1021A). If it's ever needed, we can later add the more specific "fsl,ls1028a-dspi" compatible to the driver. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
According to the linux device tree specification the compatible string is: compatible = "arm,sp805", "arm,primecell"; Fix all users in u-boot. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
Update the labels of the nodes to match the kernel ones. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com> Tested-by: NVladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
While inserting them into the new location, keep them sorted by the register base offset just like in the linux kernel device tree. While at it fix the indentation. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
While inserting it into the new location, keep it sorted by the register base offset just like in the linux kernel device tree. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
While inserting them into the new location, keep them sorted by the register base offset just like in the linux kernel device tree. While at it fix the indentation. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
While inserting them into the new location, keep them sorted by the register base offset just like in the linux kernel device tree. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
While inserting them into the new location, keep them sorted by the register base offset just like in the linux kernel device tree. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
While inserting them into the new location, keep them sorted by the register base offset just like in the linux kernel device tree. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
While inserting them into the new location, keep them sorted by the register base offset just like in the linux kernel device tree. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
While inserting them into the new location, keep them sorted by the register base offset just like in the linux kernel device tree. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
While inserting it into the new location, keep it sorted by the register base offset just like in the linux kernel device tree. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
While inserting them into the new location, keep them sorted by the register base offset just like in the linux kernel device tree. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
Populate the /soc node with the first device node. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
To keep the device tree similar to the linux kernel one, we need to move all CCSR related devices into the /soc node. To keep the patches easy to review, we initially add an empty /soc node and populate it piece by piece. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
Nowadays, both boards boot using the TF-A BL1/BL2 and SPL isn't used at all. The property is not needed, remove it. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
This node is some hodgepodge between the ddr controller node at SoC offset 0x1080000 and some static memory size of 2GiB. Remove this bogus node because it doesn't seem to be used at all. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com> Tested-by: NVladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
There is no "fsl,ls1028a-gpu" compatible string. It is solely for the proprietary driver which will never be open source. Lately, linux gained support for the open source etnaviv driver for the GPU (although there is still support for the DisplayPort PHY missing to get actual graphics output). Thus, instead of supporting some proprietary driver, switch over to the open source one, which also have an official device tree binding. Cc: Andy Tang <andy.tang@nxp.com> Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Maninder Singh 提交于
Adds check for memory clock variable before calculating caslat_actual. Set mclk_ps to slowest DIMM supported if mclk_ps is found zero. Signed-off-by: NManinder Singh <maninder.singh_1@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
Extended fsl_mc command adding an extra option dump_log Signed-off-by: NCosmin-Florin Aluchenesei <aluchenesei.cosmin-florin@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Tom Rini 提交于
This has not been supported by toolchains for some time and has been putting out a warning. Drop this. Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NThomas Huth <thuth@redhat.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Kuldeep Singh 提交于
Remove "num-cs" property from device-tree as it is no longer used by qspi driver anymore. Also, specify status as "disabled" and enable qspi support in respective board dts files. This will also help in aligning node properties with other board properties. Signed-off-by: NKuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
Document the update image and how to use the EFI UpdateCapsule. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Frieder Schrempf 提交于
In order to add other Kontron boards to the docs alongside the existing sl28 board, we need to reduce the levels of the sections and change the title. Cc: Fabio Estevam <festevam@gmail.com> Signed-off-by: NFrieder Schrempf <frieder.schrempf@kontron.de> Acked-by: NMichael Walle <michael@walle.cc> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
Enable support for update over EFI UpdateCapsule mechanism. This board doesn't support setting EFI variables after ExitBootservices(). Therefore, we are also enabling EFI_IGNORE_OSINDICATIONS. Signed-off-by: NMichael Walle <michael@walle.cc> [Rebased] Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
Generate a FIT update image during build. The image will be called "u-boot.update" and can be used to build an EFI UpdateCapsule or during DFU mode. Although, the latter isn't supported because there is no USB OTG driver yet. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Michael Walle 提交于
Allow EFI to actually set the time before ExitBootServices(). Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Wasim Khan 提交于
Increase fdt blob size for lx2160 and lx2162 series to fix below errors/warnings during device tree fixup. Unable to update property /soc/spi@2100000:status, err=FDT_ERR_NOSPACE Unable to update property /soc/spi@2110000:status, err=FDT_ERR_NOSPACE Unable to update property /soc/spi@2120000:status, err=FDT_ERR_NOSPACE WARNING: could not set reg FDT_ERR_NOSPACE. WARNING unable to set iommus: FDT_ERR_NOSPACE Signed-off-by: NWasim Khan <wasim.khan@nxp.com> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Kshitiz Varshney 提交于
Remove Double free issue from calc_img_key_hash() and calc_esbchdr_esbc_hash() function. Verified the secure boot changes using lx2162aqds board. Signed-off-by: NKshitiz Varshney <kshitiz.varshney@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Kuldeep Singh 提交于
LX2162A-QDS has micron mt35xu512aba flash which requires flag CONFIG_SPI_FLASH_MT35XU on to probe flash successfully. Signed-off-by: NKuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: NWasim Khan <wasim.khan@nxp.com> Tested-by: NWasim Khan <wasim.khan@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Alban Bedel 提交于
Disabling PCIE support currently lead to a crash because the code for erratum A010315 is still run. Add a conditional to only select CONFIG_SYS_FSL_ERRATUM_A010315 when CONFIG_PCIE_LAYERSCAPE is enabled. Signed-off-by: NAlban Bedel <alban.bedel@aerq.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Meenakshi Aggarwal 提交于
Rename emmc_bootcmd environment variable to sd2_bootcmd to fix emmc boot on lx2162aqds board. Signed-off-by: NMeenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Priyanka Singh 提交于
Set popts->cpo_sample to 0x54 in t104xrdb/ddr.c to optimize cpo Signed-off-by: NPriyanka Singh <priyanka.singh@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Priyanka Singh 提交于
Fix Bad Shift operator issue in step_to_string function by adding an if check Signed-off-by: NPriyanka Singh <priyanka.singh@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Priyanka Singh 提交于
Fix possible divide by zero issue in fsl_ddr_set_memctl_regs by adding an if check Signed-off-by: NPriyanka Singh <priyanka.singh@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
由 Priyanka Singh 提交于
Fix possible divide by zero issue in get_memory_clk_period_ps by adding a check Signed-off-by: NPriyanka Singh <priyanka.singh@nxp.com> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
- 08 11月, 2021 1 次提交
-
-
https://source.denx.de/u-boot/custodians/u-boot-efi由 Tom Rini 提交于
Pull request for efi-2022-01-rc2 Documentation: * improve description of mmc rescan * remove obsolete PPC documenation UEFI * Provide unit test for the EFI_TCG2_PROTOCOL * Implement add EFI_TCG2_PROTOCOL.SubmitCommand * Start the implementation of a 64 bit EFI app * Reduce rcar3_salvator-x image size
-