- 01 12月, 2017 5 次提交
-
-
由 Heinrich Schuchardt 提交于
Use a define to detect double inclusion of efi_loader.h. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
Provide a conversion function from utf8 to utf16. Add missing #include <linux/types.h> in include/charset.h. Remove superfluous #include <common.h> in lib/charset.c. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
The test verifies that resetting the watchdog timer ensures that it is not called during the timeout period. Testing that the watchdog timer actually executes a reset would require a test outside the efi_selftest framework. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
The watchdog is initialized with a 5 minute timeout period. It can be reset by SetWatchdogTimer. It is stopped by ExitBoottimeServices. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
To avoid a forward declaration move efi_search_obj before all protocol services functions. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 30 11月, 2017 35 次提交
-
-
-
-
-
由 Marek Vasut 提交于
Rework the ULCB CPLD driver and make it into a sysreset driver, since that is what the ULCB CPLD driver is mostly for. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Chris Packham 提交于
The order of members in struct hws_topology_map is cas_wl, cas_l. The comments in the original db-88f6820-gp.c had this wrong and have been copied to other Armada-385 based boards. Practically this hasn't made a difference since all these boards set both cas_wl and cas_l to 0 (autodetect) but if there were ever a board that did need to set these explicitly they would run into unexpected issued. Update the comments to reflect the correct order of structure members. Reported-by: NTobi Wulff <tobi.wulff@alliedtelesis.co.nz> Signed-off-by: NChris Packham <judge.packham@gmail.com> Reviewed-by: NStefan Roese <sr@denx.de> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Baruch Siach 提交于
CONFIG_ENV_IS_IN_NAND has been removed in commit 2be29653 (Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig). CONFIG_ENV_IS_IN_SPI_FLASH has been removed in commit 91c868fe (Convert CONFIG_ENV_IS_IN_SPI_FLASH to Kconfig). The environment #ifdef is now empty. Remove it. Signed-off-by: NBaruch Siach <baruch@tkos.co.il> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Sean Nyekjaer 提交于
Check if we are booting from NAND and let the bootrom continue to load the rest of the bootloader Signed-off-by: NSean Nyekjaer <sean.nyekjaer@prevas.dk> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Sean Nyekjaer 提交于
It's the first 8 bits of the bootrom error register that contain the boot error/fallback error code. Let's check that and continue to boot from UART. Signed-off-by: NSean Nyekjaer <sean.nyekjaer@prevas.dk> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Sean Nyekjaer 提交于
Signed-off-by: NSean Nyekjaer <sean.nyekjaer@prevas.dk> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Sean Nyekjaer 提交于
bbt_mirror_descr and bbt_main_descr is defined but not used when compiling without CONFIG_SYS_NAND_USE_FLASH_BBT set. Signed-off-by: NSean Nyekjaer <sean.nyekjaer@prevas.dk> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
This patch removes the inclusion of the libgcc math functions and replaces them by functions coded in C, taken from the coreboot project. This makes U-Boot building more independent from the toolchain installed / available on the build system. The code taken from coreboot is authored from Vadim Bendebury <vbendeb@chromium.org> on 2014-11-28 and committed with commit ID e63990ef [libpayload: provide basic 64bit division implementation] (coreboot git repository located here [1]). I modified the code so that its checkpatch clean without any functional changes. [1] git://github.com/coreboot/coreboot.gitSigned-off-by: NStefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Tested-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Heinrich Schuchardt 提交于
Currently X86 does not properly support distro defaults. This patch is only a partial fix. It provides the name of the bootloader EFI application for the X86 architecture. The architecture dependent file names are defined in the UEFI specification. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Anatolij Gustschin 提交于
This reverts commit 13c531e5. The error message with FIT style image mentioned in the above commit only happens when booting using FIT image containing bzImage kernel and without setup node (setup.bin). The current documentation for x86 FIT support in doc/uImage.FIT/x86-fit-boot.txt mentions that kernel's setup.bin file is required for building x86 FIT images. The above commit breaks FIT images generated as described in the documentation. Revert it to allow booting with images built in the documented way. Signed-off-by: NAnatolij Gustschin <agust@denx.de> Reviewed-by: NStefan Roese <sr@denx.de> Acked-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Heinrich Schuchardt 提交于
x86_vendor_name is defined as static const char *const x86_vendor_name[] So its elements should not be compared to 0. Remove superfluous paranthesis. Problem identified with Coccinelle. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Anatolij Gustschin 提交于
Adjust VGA rom address to 0xfffb0000 so that u-boot.rom image can be built again. Signed-off-by: NAnatolij Gustschin <agust@denx.de> Reviewed-by: NStefan Roese <sr@denx.de> Acked-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Anton Gerasimov 提交于
ROM has been made read-only in qemu recently (namely commit 208fa0e4: "pc: make 'pc.rom' readonly when machine has PCI enabled"). So this patch restores compatibility between U-Boot and qemu. Signed-off-by: NAnton Gerasimov <anton@advancedtelematic.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Tested-by: NBin Meng <bmeng.cn@gmail.com> [bmeng: mention qemu commit title in the commit message] Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Neil Armstrong 提交于
Before this patch one could receive following errors when executing "fatls" command on machine with cache enabled (ex i.MX6Q) : => fatls mmc 0:1 CACHE: Misaligned operation at range [4f59dfc8, 4f59e7c8] CACHE: Misaligned operation at range [4f59dfc8, 4f59e7c8] ERROR: v7_outer_cache_inval_range - start address is not aligned - 0x4f59dfc8 ERROR: v7_outer_cache_inval_range - stop address is not aligned - 0x4f59e7c8 CACHE: Misaligned operation at range [4f59dfc8, 4f59e7c8] CACHE: Misaligned operation at range [4f59dfc8, 4f59e7c8] ERROR: v7_outer_cache_inval_range - start address is not aligned - 0x4f59dfc8 ERROR: v7_outer_cache_inval_range - stop address is not aligned - 0x4f59e7c8 To alleviate this problem - the calloc()s have been replaced with malloc_cache_aligned() and memset(). After those changes the buffers are properly aligned (with both start address and size) to SoC cache line. Fixes: 09fa964b ("fs/fat: Fix 'CACHE: Misaligned operation at range' warnings") Suggested-by: NLukasz Majewski <lukma@denx.de> Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Reviewed-by: NLukasz Majewski <lukma@denx.de> Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>
-
由 Ben Whitten 提交于
This board is based on the Atmel sama5d3 eval boards. Supporting the following features: - Boot from NAND Flash - Ethernet - FIT - SPL Signed-off-by: NBen Whitten <ben.whitten@lairdtech.com> Signed-off-by: NDan Kephart <dan.kephart@lairdtech.com>
-
由 Ben Whitten 提交于
This board is based on the Atmel 9x5 eval board. Supporting the following features: - Boot from NAND Flash - Ethernet - FIT - SPL Signed-off-by: NBen Whitten <ben.whitten@lairdtech.com> Signed-off-by: NDan Kephart <dan.kephart@lairdtech.com>
-
由 Philipp Tomsich 提交于
GCC 7.1 seems to be smart enough to track val through the various static inline functions, but not smart enough to see that val will always be initialised when no error is returned. This triggers the following warning: env/mmc.c: In function 'mmc_get_env_addr': env/mmc.c:121:12: warning: 'val' may be used uninitialized in this function [-Wmaybe-uninitialized] To make it easier for compiler to understand what is going on, let's initialise val. Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Goldschmidt Simon 提交于
Building spl with CONFIG_OF_EMBED enabled results in an error message on my board: "SPL image too big". This is because the fdtgrep build step is only executed for CONFIG_OF_SEPARATE. Fix this by moving the fdtgrep build step ('cmd_fdtgreo') from scripts/Makefile.spl to dts/Makefile so that the reduced dtb is available for all kinds of spl builds. The resulting variable name for the embedded device tree blob changes, too, which is why common.h and fdtdec.c have tiny changes. Signed-off-by: NSimon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Adam Ford 提交于
In U-Boot, this device tree is compatible with both the Torpedo and SOM-LV kits. Let's rename it in the device tree since the U-Boot code and show a more generic OMAP3 name. The code auto detects between the two and loads the proper DTB file for Linux. This would eliminate the SOM-LV showing the name Torpedo during boot and hopefully eliminate some confusion. Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Heinrich Schuchardt 提交于
It is unwise to first dereference a variable and then to check if it was NULL. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NMarek Behun <marek.behun@nic.cz> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Heinrich Schuchardt 提交于
Remove an unreachable return statement. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Heinrich Schuchardt 提交于
When copying the command line buffer the target array should at least have the same size. Cf. definition of console_buffer in common/cli_readline.c. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Patrick Delaunay 提交于
use ALLOC_CACHE_ALIGN_BUFFER_PAD for mbr header allocation in stack to fix alloc issue in is_gpt_valid() this patch fix also issue for GPT partition handling with blocksize != 512 in set_protective_mbr() Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
由 Ludovic Desroches 提交于
Add the SAMA5D2 PTC EK board and remove the SAMA5D2 PTC ENGI board which was a prototype. Signed-off-by: NLudovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
-
由 Ludovic Desroches 提交于
Add a header for SAMA5D2 SMC since it's not compatible with SAMA5D3 one. Signed-off-by: NLudovic Desroches <ludovic.desroches@microchip.com> [wenyou: fix the wrong base address of the SMC register] Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
-
由 Ludovic Desroches 提交于
The capabilities have default values which doesn't reflect the reality when it concerns the base clock and the mul value. Use a fixe rate for the gck. 240 MHz is an arbitrary choice, it is a multiple of the maximum SD clock frequency handle by the controller and it allows to get a 400 kHz clock for the card initialisation. Signed-off-by: NLudovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
-
由 Wenyou Yang 提交于
Differentiate the generic clock source selection value from the parent clock index to fix the incorrect assignment of the generic clock source selection. Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
-
由 Ludovic Desroches 提交于
To get the same behavior as the Linux driver, instead of selecting the closest inferior rate, select the closest inferior or superior rate Signed-off-by: NLudovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
-
由 Wenyou Yang 提交于
What the AT91_UTMI depends on SPL_DM isn't right. AT91_UTMI is not only used in SPL, also in other place, even if SPL_DM isn't enabled. Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
-
由 Patrice Chotard 提交于
MPU's region setup can be factorized between STM32F4/F7/H7 SoCs family and used a common MPU's region config. Only one exception for STM32H7 which doesn't have device area located at 0xA000 0000. For STM32F4, configure_clocks() need to be moved from arch_cpu_init() to board_early_init_f(). Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Reviewed-by: NVikas Manocha <vikas.manocha@st.com>
-
由 Patrice Chotard 提交于
In order to factorize code between STM32F4 and STM32F7 migrate all structs related to RCC clocks in include/stm32_rcc.h Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Reviewed-by: NVikas Manocha <vikas.manocha@st.com>
-
由 Patrice Chotard 提交于
MMC block needs 48Mhz source clock, for that we choose to select the SAI PLL. Update also stm32_clock_get_rate() to retrieve the MMC clock source needed in MMC driver. STM32F4 uses a different RCC variant than STM32F7. For STM32F4 sdmmc clocks bit are located into dckcfgr register whereas there are located into dckcfgr2 registers on STM32F7. In both registers, bits CK48MSEL and SDMMC1SEL are located at the same position. Signed-off-by: NChristophe Priouzeau <christophe.priouzeau@st.com> Signed-off-by: NPatrice Chotard <patrice.chotard@st.com> Reviewed-by: NVikas Manocha <vikas.manocha@st.com>
-