Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>

PPC4xx config options were not complete.
ICS8N3QV01 and SIL1178 needed some more configuration.
Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>

IHS I2C master support was merely a hack in the osd driver.
Now it is a proper u-boot I2C framework driver, supporting the
v2.00 master features.
Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>

There is a new iocon hardware flavor, supporting DisplayPort finally.
Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>

Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>

Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>

readl was called with values instead of pointers to these values.
Why this ever did work is a mystery...
Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>

Since ARRAY_SIZE macro is defined in include/common.h,
re-defining it in arch-specific files is redundant.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: NStefan Roese <sr@denx.de>
Acked-by: NSonic Zhang <sonic.zhang@analog.com>

Add invalidate_dcache_range() and flush_dcache_range() for the blackfin
architecture. Such functions already exist on this arch with different
names, so just forward the call.

This fixes the build of bf609-ezkit board as it uses
drivers/net/designware.c which requires the above functions.

Cc: Sonic Zhang <sonic.adi@gmail.com>, Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: NVasili Galka <vvv444@gmail.com>

get_sclk() was not defined in bfin_wdt.c, include the corresponding header.

Cc: Sonic Zhang <sonic.adi@gmail.com>
Signed-off-by: NVasili Galka <vvv444@gmail.com>

The csarX and cscrX registers in the fbcs_t struct are 16-bit for
CONFIG_M5235 and 32-bit wide otherwise. The code in cpu_init.c
accessed them always as 32-bit, effectively creating a wrong memory
access on M5235. Fixed that by choosing out_be16/out_be32 depending
on whether CONFIG_M5235 is defined or not.

Cc: Jason Jin <Jason.jin@freescale.com>
Signed-off-by: NVasili Galka <vvv444@gmail.com>

in_be16() shall be passed a pointer to register and not its value. This
is clearly a typo resulting in a wrong memory access, so fix it.

Cc: Alison Wang <b18965@freescale.com>, Jason Jin <Jason.jin@freescale.com>
Signed-off-by: NVasili Galka <vvv444@gmail.com>

This board is old enough and has no maintainer.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

This board is old enough and has no maintainer.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

These boards are old enough and have no maintainers.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

These boards are old enough and have no maintainers.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

This board is old enough and has no maintainer.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

These boards are old enough and have no maintainers.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

These boards are old enough and have no maintainers.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

clang is tempted to inteprete such a condition as a assignment
as well. Since it isn't don't use double brackets.

cc: Tom Wai-Hong Tam <waihong@chromium.org>
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

The option can be used to save the environment in spi flash.
Implementation code is already exist in command/env_sf.c. But
the documentation is missing.

This patch add the details for this option to the README file.
Signed-off-by: NJosh Wu <josh.wu@atmel.com>
Reviewed-by: NJagannadha Sutradharudu Teki <jaganna@xilinx.com>

Use get_device_and_partition() is better since:
1. It will call the device initialize function internally. So we can
remove the mmc intialization code to save many lines.
2. It is used by fatls/fatload/fatwrite. So saveenv & load env should
use it too.
3. It can parse the "D:P", "D", "D:", "D:auto" string to get correct
device and partition information by run-time.

Also we remove the FAT_ENV_DEVICE and FAT_ENV_PART. We use a string:
FAT_ENV_DEVICE_AND_PART.
For at91sam9m10g45ek, it is "0". That means use device 0 and if:
a)device 0 has no partition table, use the whole device as a FAT file
system.
b)device 0 has partittion table, use the partition #1.

Refer to the commit: 10a37fd7 for details of device & partition string.
Signed-off-by: NJosh Wu <josh.wu@atmel.com>
Reviewed-by: NStephen Warren <swarren@nvidia.com>

* This is done by limiting the ARM's bandwidth and setting DSS priority in
  the EMIF controller to ensure underflows do not occur.

* Boot failures have been discovered due to a combination of routing issues and
  non optimal ddr3 timings in the EMIF
* Since ddr3 timings are different after significant board layout changes
  different timings are required for alpha, beta and production boards.
Signed-off-by: NFranklin S. Cooper Jr <fcooper@ti.com>

Make it clear that we need to load a legacy-formatted (aka uImage)
kernel into memory as well as the DT if used before using "spl export".

Cc: Yebio Mesfin <ymesfin@ti.com>
Signed-off-by: NTom Rini <trini@ti.com>

J6 EVM can be built with UART3 as console, but currently
there's nothing muxing UART3 correctly. Likely this only
works because, based on commit log, author was only testing
with UART3 boot and - I assume - ROM code leave UART3 correctly
muxed in that case.

If we want to boot from MMC and still use UART3 as console,
then we need to mux those signals correctly.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

The directory arch/${ARCH}/cpu/${CPU} does not exist
in avr32, blackfin, microblaze, nios2, openrisc, sandbox, x86.

These architectures have only one CPU type.
Defining CPU should not be required for such architectures.

This commit allows cpu field (= the 3rd field of boards.cfg)
to be kept blank.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Sonic Zhang <sonic.zhang@analog.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Thomas Chou <thomas@wytron.com.tw>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>

In README file, add document for the missing configuration option:
CONFIG_ENV_IS_IN_FAT.
Signed-off-by: NJosh Wu <josh.wu@atmel.com>
Reviewed-by: NStephen Warren <swarren@nvidia.com>

Commit 7d89982b stopped creating symbolic link
arch/${arch}/include/asm/proc.

We do not need to delete it by "make mrproper" any more.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Vasili Galka <vvv444@gmail.com>

The code intends for the CM_DLL_READYST to be set, but
actually polls till any bit is set since the logical
AND is used instead of the bitwise one is used. Fix it.

cc: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>

We need to subtract two hex numbers. Avoid using strtonum() by doing the
subtraction in bc with a suitable input base.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Reported-by: NVasili Galka <vvv444@gmail.com>

To move the arch common function away from board folder to
arch/arm/cpu/armv7/socfpga folder. Its to avoid code duplication
for other non Altera dev kit which is using socfpga device.
Signed-off-by: NChin Liang See <clsee@altera.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
Cc: Pavel Machek <pavel@denx.de>
Cc: Dinh Nguyen <dinguyen@altera.com>
Acked-by: NDetlev Zundel <dzu@denx.de>

Turn on generic board for the integrators, as per the request in
the startup message. Everything just works, tested on the
Integrator/AP and Integrator/CP.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NSimon Glass <sjg@chromium.org>

Serial port, SD card, and LCD all work.
Signed-off-by: NStephen Warren <swarren@wwwdotorg.org>
Acked-by: NSimon Glass <sjg@chromium.org>

Signed-off-by: NChristian Riesch <christian.riesch@omicron.at>

Fix following compilation error when CONFIG_ARM64 is defined

Error: unknown or missing system register name at operand 2
-- `mrs x0,daifmsr daifset,#3'
Signed-off-by: NShaibal.Dutta <shaibal.dutta@broadcom.com>
Signed-off-by: NDarwin Rambo <drambo@broadcom.com>
Reviewed-by: NDarwin Rambo <drambo@broadcom.com>

Enable 'generic board init' for H2200 palmtop.
Signed-off-by: NLukasz Dalek <luk0104@gmail.com>
Acked-by: NMarek Vasut <marex@denx.de>

cc: Tom Rini <trini@ti.com>
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>