- 29 7月, 2019 40 次提交
-
-
由 Kever Yang 提交于
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
The SoC one time setting should go to arch_cpu_init() in rk322x.c Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
Move dram_init() into rk3036.c so that we can use to common board file later. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
dram_init_banksize() can be common used by all SoCs, move it into sdram_common.c Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
Add common board file for Rockchip SoCs to avoid too much copy-paste work for different SoCs. This board file in charge for common board_init() and board_late_init() in U-Boot proper. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
Use "snps,dwc2" for compatible name and and common variable names so that we can share the common code for all SoCs. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
The fastboot_set_reboot_flag() update a TAG into a register for next boot, use the common macro for the register so that we can re-use the function for different SoCs. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
Add board_debug_uart_init() to make the debug UART work with correct setting. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
rk3399 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
Add a board_early_init_f() in board_init_f() and move the board specific init code into its own board file. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
Move boot_devices definition into rk3399.c, so that we can share the common code for board_spl_was_booted_from(). Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
Move spl_board_init() into rk3399.c so that we can re-use the common SPL board file later. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
SoC setting like DDR secure region and EMMC clock setting should go to arch_cpu_init(). Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
Show the SPL BANNER earlier so that we know already get into SPL. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
Move the spl_perform_fixups() into rk3399.c so that we can use common spl board file later. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
The driver need a mapping to get the dts node by boot srouce ID. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
rk3368 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
The driver need a mapping to get the dts node by boot srouce ID. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
rk3328 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
Add the CONFIG_ROCKCHIP_STIMER_BASE so that we can use the stimer init function in tpl.c and spl.c Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
The driver need a mapping to get the dts node by boot srouce ID. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
"u-boot,spl-boot-order" is more flexible and other rockchip SoCs has convert to use it, migrate to use the new dts property. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
We are using "u-boot,spl-boot-order" now and re-use the definition from rk3288-u-boot.dtsi, so remove it directly here. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
rk3288 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
Mov edram_init_banksize() into rk3288.c so that we can re-use the common SPL board file later. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
phycore_init() is use for phycore board only, it should be move back to phycore-rk3288.c Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
Only firefly-rk3288 has the dts node "u-boot,boot-led", while CONFIG_SPL_LED is not enable, move code to firefly-rk3288 now in case someone need this code. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
Show the SPL BANNER earlier so that we know already get into SPL. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
Update to fix warning: u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/uboot@1 has a unit name, but no reg property u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/optee@1 has a unit name, but no reg property u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/fdt@1 has a unit name, but no reg property u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /configurations/conf@1 has a unit name, but no reg property Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
The driver need a mapping to get the dts node by boot srouce ID. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
rk322x has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
Use arch_cpu_init() to init SoC secure region and move it to rk322x.c Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
rk3188 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
The driver need a mapping to get the dts node by boot srouce ID. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
Clean up the rk3188.c so that we can re-use the common spl board file. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
SPL bootrom support is a boot device just like mmc and etc, use formal boot device instead of jump to bootrom directly. Enable the Kconfig by default if ROCKCHIP_BACK_TO_BROM is enabled. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
The SoC feature init will be better to use arch_cpu_init() and goes to soc file. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
Init CPU frquency in clock driver instead of in SPL board file, this will help for use common board file later. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-