Move the main symbol for Freescale Fman Ethernet controller option to
Kconfig.  Also migrate the CONFIG_SYS_QE_FMAN_FW_IN_xxx macros and
rename the SPIFLASH one to follow the same format as all of the others.
To do this fully we need to migrate CONFIG_QC, do so.
Signed-off-by: NTom Rini <trini@konsulko.com>

Pull request for UEFI sub-system for v2019.07-rc3 (3)

Several bug fixes for the UEFI sub-system are provided.
The SetTime() boottime service is implemented.

- mtmips: network stability fixes for gardena-smart-gateway
- mtmips: enable CONFIG_USE_PREBOOT and CONFIG_CMD_WDT

If a variable already exists, efi_set_variable() should not change
the variable's attributes. This patch enforces it.
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

The current efi_st_variable() doesn't support EFI_VARIABLE_APPEND_WRITE
attiribute for now, and so should return an error.
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>

Fix typos is commit message.
Add TODO comment.
Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

The error here should be marked *todo*.
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

According to the FAT32 specification 0x7f (DEL) is not a legal character
for file names.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Change comments for struct efi_open_protocol_info_item and
struct efi_handler to Sphinx format.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Since commit 226cddbe ("efi_loader: check device path in
InstallMultipleProtocolInterfaces") iPXE fails to access the network.

LocateDevicePath() returns EFI_SUCCESS even if a shorter path is found as a
partial match. It returns the remaining path. So to be sure that we found a
complete match we need to check that the remaining path refers to an end
node.

Provide debug output if a device path has already been installed.

Fixes: 226cddbe ("efi_loader: check device path in
       InstallMultipleProtocolInterfaces")
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

According to the UEFI spec 2.8 the GetTime() runtime service should return
EFI_UNSUPPORTED if the real time clock is not available.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Implement the SetTime() runtime service.

Extend the real time clock selftest to check setting the clock.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Enable CONFIG_USE_PREBOOT on for the gardena mt7688 platforms, so that
this feature can be used here.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

With commit 06985289 ("watchdog: Implement generic watchdog_reset()
version") the init sequence has changed in arch_misc_init(), resulting
in a re-appearance of the d-cache issue on MT7688 boards (e.g. gardena).
When this happens, the first (or sometimes later ones as well) TFTP
command hangs and does not complete correctly. This leads to the
assumption that the d-cache is not in a clean state once the ethernet
driver is called (d-cache is used here for the buffers). The old work-
around with the cache flush somehow does not work any more now with
the new code change.

To fix this issue, this patch now removes the old workaround and selects
CONFIG_SYS_MALLOC_CLEAR_ON_INIT for ARCH_MTMIPS. With this option the
complete malloc area is initialized with zeros (cache lines are touched).
Testing has shown that this also fixes the issue on the MT7688 boards.
Signed-off-by: NStefan Roese <sr@denx.de>
Suggested-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

This patch enables the "wdt" command, which is quite useful for watchdog
testing.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

- Add various STM32MP1 fixes for serial, env, clk, board, i2c ...

- Add STM32MP1 DDR driver update:
	These update introduce the DDR interactive mode described in:
	https://wiki.st.com/stm32mpu/index.php/U-Boot_SPL:_DDR_interactive_mode

	This mode is used by the CubeMX: DDR tuning tool.
	https://wiki.st.com/stm32mpu/index.php/STM32CubeMX

	The DDR interactive mode is NOT activated by default because
	it increase the SPL size and slow down the boot time
	(200ms wait added).

- Enable DM for SATA, SDHC, USB in T2080QDS

- Import Angelo's series to add basic DT support to m68k

Signed-off-by: NAngelo Dureghello <angelo@sysam.it>

Changes for v5:
- new patch

This patches move dspi bus-related operations into more
proper location, to avoid the driver to declares them as externs.
Signed-off-by: NAngelo Dureghello <angelo@sysam.it>

Add SUPPORT_OF_CONTROL at this stage, to avoid to break build
bisectability.
Signed-off-by: NAngelo Dureghello <angelo@sysam.it>

This patch removes CONFIG_SYS_DSPI_XX options from
include/configs "m68k" .h board files, since CTAR
registers are now set with default values in the cf_spi
driver initialization, and configurable by devicetree.

Note, these options cannot be totally removed from the
whitelist, since still used from boards using fsl_dspi.c
(mostly arm-based boards).
Reviewed-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NAngelo Dureghello <angelo@sysam.it>

This patch adds devicetree support to the mcfuart.c driver
and removes non DM code.
Reviewed-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NAngelo Dureghello <angelo@sysam.it>

This patch adds CONFIG_DM_SPI for all m68k boards using
the cf_spi.c driver (DSPI module).
Reviewed-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NAngelo Dureghello <angelo@sysam.it>

Converting to driver model and removes non-dm code.
Reviewed-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NAngelo Dureghello <angelo@sysam.it>

This patch adds cf_spi DM Kconfig option.
Reviewed-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NAngelo Dureghello <angelo@sysam.it>

Enable DT usage for all m68k boards. To provide a
working single binary, the dts has been kept as embedded.
Signed-off-by: NAngelo Dureghello <angelo@sysam.it>

Growing of binary size asks for long assembly jumps.
Reviewed-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NAngelo Dureghello <angelo@sysam.it>

This patch adds basic dts files for all the m68k boards.
Reviewed-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NAngelo Dureghello <angelo@sysam.it>
[trini: Add CONFIG_TARGET_M5329EVB dtbs and update M5329EVB defconfigs]
Signed-off-by: NTom Rini <trini@konsulko.com>

This patch adds fdt support to the m68k architecture.
Reviewed-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NAngelo Dureghello <angelo@sysam.it>

This patch adds a basic group of devicetrees, one for each
cpu family, including actually just uart and dspi devices,
since these are the drivers supporting devicetree (support
added in this patch-set).
Acked-by: NJagan Teki <jagan@amarulasolutions.com>
Signed-off-by: NAngelo Dureghello <angelo@sysam.it>
Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>

Enable eSDHC, SATA and USB DM for T2080QDS in uboot
Signed-off-by: NPeng Ma <peng.ma@nxp.com>
Signed-off-by: NYinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

Signed-off-by: NPeng Ma <peng.ma@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

Signed-off-by: NPeng Ma <peng.ma@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

This patch is to support Freescale sata driver with dts initialized.
Also resolved the following problems.

===================== WARNING ======================
This board does not use CONFIG_DM_SCSI. Please update
the storage controller to use CONFIG_DM_SCSI before the v2019.07 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/MIGRATION.txt for more info.
====================================================
Signed-off-by: NPeng Ma <peng.ma@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

adopt 32 bit addr in fsl_esdhc for CONFIG_PPC.
So  adopt 32 bit address for CONFIG_PPC.
Signed-off-by: NYinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

Signed-off-by: NYinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

Signed-off-by: NYinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

Add command tuning for DDR interactive mode, used during
board bring-up or with CubeMX DDR tools to execute software
tuning for the DDR configuration:
- software read DQS Gating (replace the built-in one)
- Bit de-skew
- Eye Training or DQS training
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>

Add command tests for DDR interactive mode, used during
board bring-up or with CubeMX DDR tools to verify the
DDR configuration.
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>

This debug mode is used by CubeMX DDR tuning tools
or manualy for tests during board bring-up.
It is simple console used to change DDR parameters and check
initialization.
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>