- 07 7月, 2017 3 次提交
-
-
由 Martin Böh 提交于
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
Add missing static to serial_stub_puts(). Unexport serial_stub_{getc,tstc} because they are used locally. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 04 7月, 2017 7 次提交
-
-
git://github.com/agraf/u-boot由 Tom Rini 提交于
Patch queue for efi - 2017-07-04 Highlights this time: bugfixes. With these changes, OpenBSD should be more happy.
-
由 xypron.glpk@gmx.de 提交于
If a relocation type is not supported loading the EFI binary should be aborted. Writing a message only is insufficient. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> [agraf: use a() != b coding style] Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
The efi-next tree lives on github, not the usual denx git. Reflect this in the MAINTAINERS file so that people can find it. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 xypron.glpk@gmx.de 提交于
UEFI spec 2.7 indicates that HandleProtocol can be implemented by calling OpenProtocol with attributes = EFI_OPEN_PROTOCOL_BY_HANDLE_PROTOCOL. Currently we pass attributes = 0 to efi_open_protocol. 0 is not a valid value when calling OpenProtocol. This does not cause any errors yet because our implementation of OpenProtocol is incomplete. We should pass the correct value to enable a fully compliant implementation of OpenProtocol in the future. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Heiko Schocher 提交于
There was for long time no activity in the 4xx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 4xx, so remove it. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
driver is not used anymore, so remove it. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
- 03 7月, 2017 4 次提交
-
-
由 Masahiro Yamada 提交于
These are locally used in lib/efi_loader/efi_boottime.c Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Jonathan Gray 提交于
Add some of the invalid parameter checks described in the UEFI specification for CreateEvent(). This does not include checking the validity of the type and tpl parameters. Signed-off-by: NJonathan Gray <jsg@jsg.id.au> Acked-By: NHeinrich Schuchardt <xypron.glpk@gmx.de> [agraf: fix checkpatch.pl indent warning] Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Jonathan Gray 提交于
The UEFI specification states that the tpl, function and context arguments are to be ignored if neither EVT_NOTIFY_WAIT or EVT_NOTIFY_SIGNAL are specified. This matches observed behaviour with an AMI EDK2 based UEFI implementation. Skip calling the notify function if neither flag is present. Signed-off-by: NJonathan Gray <jsg@jsg.id.au> Acked-By: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
When running bootefi, we allocate new space but never check whether the allocation succeeded. This patch adds a check so that in case things go wrong, we at least know they did. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 30 6月, 2017 24 次提交
-
-
由 Fabio Estevam 提交于
Wig Cheng's email bounces, so remove it from the maintainers list. Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
-
由 Christophe Leroy 提交于
doc/README.fsl-clk was removed in commit 5b8e76c3 ("powerpc, 8xx: remove support for 8xx") allthought CONFIG_SYS_FSL_CLK is defined in arch/arm/cpu/armv8/fsl-layerscape/Kconfig and still in use in the following configs: ./include/configs/mx53loco.h:21:#define CONFIG_SYS_FSL_CLK ./include/configs/m53evk.h:16:#define CONFIG_SYS_FSL_CLK ./include/configs/mx25pdk.h:17:#define CONFIG_SYS_FSL_CLK ./include/configs/usbarmory.h:14:#define CONFIG_SYS_FSL_CLK ./include/configs/ls1021aqds.h:14:#define CONFIG_SYS_FSL_CLK ./include/configs/mx53cx9020.h:22:#define CONFIG_SYS_FSL_CLK ./include/configs/colibri_vf.h:17:#define CONFIG_SYS_FSL_CLK ./include/configs/mx35pdk.h:21:#define CONFIG_SYS_FSL_CLK ./include/configs/woodburn_common.h:19:#define CONFIG_SYS_FSL_CLK ./include/configs/mx7_common.h:25:#define CONFIG_SYS_FSL_CLK ./include/configs/ls1021aiot.h:12:#define CONFIG_SYS_FSL_CLK ./include/configs/ls1021atwr.h:14:#define CONFIG_SYS_FSL_CLK ./include/configs/mx53ard.h:21:#define CONFIG_SYS_FSL_CLK ./include/configs/mx53smd.h:21:#define CONFIG_SYS_FSL_CLK ./include/configs/mx51evk.h:16:#define CONFIG_SYS_FSL_CLK ./include/configs/mx6_common.h:31:#define CONFIG_SYS_FSL_CLK ./include/configs/vf610twr.h:14:#define CONFIG_SYS_FSL_CLK ./include/configs/mx53evk.h:21:#define CONFIG_SYS_FSL_CLK Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 Tom Rini 提交于
DENX hardware is now under Aries Embedded, update the job. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
The author of the commit discovered later on that this was already being done in cleanup_before_linux() on arch/arm/cpu/armv7m/cpu.c. This reverts commit 8f079ccc. Signed-off-by: NTom Rini <trini@konsulko.com>
-
-
由 Marek Vasut 提交于
Discern the SoMs based on the presence of SPI flash to support both variants of the SoM, one booting from SPI NOR and one booting from eMMC. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com>
-
由 Marek Vasut 提交于
Use random ethaddr by default in case no ethaddr is set. Signed-off-by: NMarek Vasut <marex@denx.de>
-
由 Marek Vasut 提交于
The redesigned version of the SoM which was released onto the market does no longer contain SPI flash, but boots from the eMMC. Move the environment storage to the eMMC. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com>
-
由 Marek Vasut 提交于
Continue loading U-Boot from MMC2 when the SPL was loaded using SAM-BA loader. This allows the board to boot system from the removable media instead of the eMMC, which is useful for commissioning purposes. When booting from the eMMC, always boot from it as it is not possible to boot from the SD interface directly. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com>
-
由 Marek Vasut 提交于
The SoM has been redesigned to work around bug in the SoC and is now capable of booting from the eMMC. Add support for booting from eMMC. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com>
-
由 Marek Vasut 提交于
The SDHCI1 is the primary boot controller on rev. 2.1 SoM, which is the version available on the market. Swap the controller order to match this and future versions of the SoM. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com>
-
由 Marek Vasut 提交于
Init the controllers, otherwise the board cannot boot from SD/MMC. This boot option is new on rev. 2.1 SoM . Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com>
-
由 Marek Vasut 提交于
Enable DFU and USB mass storage support for the DENX MA5D4 SoM. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com>
-
由 Marek Vasut 提交于
The CAN controllers need slight delay between toggling of their reset line. Move this action into board_init(), otherwise timer will not be initialized and the board might hang. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com>
-
由 Marek Vasut 提交于
According to the datasheet, sequential mapping is used for DDR SDRAM, while interleaved mapping is used for regular SDRAM. Incorrect configuration of this bit does indeed cause sporadic memory instability. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Wenyou Yang <wenyou.yang@atmel.com>
-
由 Marek Vasut 提交于
The board is now manufactured by Aries Embedded GmbH , rename it. Signed-off-by: NMarek Vasut <marex@denx.de>
-
由 Alexey Brodkin 提交于
ARC HS Development Kit board is a new low-cost development platform sporting ARC HS38 in real silicon with nice set of features such as: * Quad-core ARC HS38 with 512 kB L2 cache and running @1GHz * 4Gb of DDR (we use only lowest 1Gb out of it now) * Lots of DesigWare peripherals * Different connectivity modules: - Synopsys HAPS HT3 - Arduino-compatible connector - MikroBUS This initial commit supports the following peripherals: * UART (DW 8250) * Ethernet (DW GMAC) * SD/MMC (DW Mobile Storage) * USB 1.1 & 2.0 Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>
-
由 Alexey Brodkin 提交于
We used to use the same memory layout and size for a couple of boards and thus we just hardcoding IOC aperture start and size. Now when we're getting more boards with more memory on board we need to have an ability to set IOC so it matches real DDR layout and size. Even though it is not really a must but for simplicity we assume IOC covers all the DDR we have, that gives us a chance to not bother where DMA buffers are allocated - any part of DDR is OK. Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>
-
由 Alexey Brodkin 提交于
With deprecation of I2C EEPROM we we left without a permamnent storage for U-Boot environment, but luckily we may simply use SD-card with FAT partition for that. Having environment on SD-card is much more convenient as it allows us to preserve all the settings when moving from one board to another. Moreover instead of 256 bytes of EEPROM we're now virtually unlimited in stuff being placed in environment like complicated scripts etc which are usually required in case of full-scale distros. Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>
-
由 Alexey Brodkin 提交于
With eb5ba3ae "i2c: Drop use of CONFIG_I2C_HARD" in place we cannot use I2C EEPROM any longer so we're dropping all references to both EEPROM and I2C which was only used for EEPROM. Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com> Cc: Simon Glass <sjg@chromium.org>
-
由 Alexey Brodkin 提交于
Enable shell commands history on ARC boards for more convenience of users. Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>
-
由 Alexey Brodkin 提交于
Those could be easily used on USB flash drives or on SD/MMC cards. Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>
-
由 Alexey Brodkin 提交于
There's no reason to keep data cache disabled in axs101 board any longer, enabling it. Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>
-
由 Alexey Brodkin 提交于
ARCompact cores are not supposed to be used in SMP designs (this doesn't stop people from creation of heterogeneous chips, for an example keep reading) so there's no point in checking ARCNUM and halting somebody if we build for ARC700. Moreover on AXS101 board we have ARC770 in the ASIC together with other ARC cores and ARC770 happens to be the last node in JTAG chain with ARCNUM = 4. And existing check halts the one and only core we want keep running. Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>
-
- 29 6月, 2017 2 次提交
-
-
由 Heiko Schocher 提交于
since commit: f8b7fff1 "serial: atmel_usart: Add clk support" taurus board comes not up anymore. Fix it. Signed-off-by: NHeiko Schocher <hs@denx.de> Acked-by: NWenyou Yang <wenyou.yang@microchip.com>
-
由 Heiko Schocher 提交于
since commit 842778a0 dfu-util shows serial="UNDEFINED". to see here again a serial number, we have to call g_dnl_set_serialnumber(). Signed-off-by: NHeiko Schocher <hs@denx.de>
-