- 10 12月, 2011 2 次提交
-
-
由 Chander Kashyap 提交于
As per new naming convention for Samsung SoC's, all Cortex-A9 and Cortex-A15 based SoC's will be classified under the name Exynos. Cortex-A9 and Cortex-A15 based SoC's will be sub-classified as Exynos4 and Exynos5 respectively. In order to better adapt and reuse code across various upcoming Samsung Exynos based boards, all uses of s5pc210 prefix/suffix/directory-names are renamed in this patch. s5pc210 is renamed as exynos4210 and S5PC210/s5pc210 suffix/prefix are renamed as exynos4/EXYNOS4. Signed-off-by: NChander Kashyap <chander.kashyap@linaro.org> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Stephen Warren 提交于
Ventana is a board which is very similar to Seaboard. Support it by re-using board/nvidia/seaboard/seaboard.c with minor run-time conditionals. v5: Makefile: Use cmd_link_o_target, remove unused clean/distclean targets. v6: Make gpio_config_uart_seaboard() static. v7: Add MAINTAINERS entry for Ventana. Tom Warren doesn't have Ventana, so he asked me to add myself for this board. Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
- 09 12月, 2011 2 次提交
-
-
由 Wolfgang Denk 提交于
The "rmu" board has long been unmaintained, and is broken. Remove it. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
The BAB7xx boards are almost deceased. They cause build warnings, an it's not worth the effort to fix these. Remove the dead body. Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Frank Gottschling <fgottschling@eltec.de>
-
- 07 12月, 2011 6 次提交
-
-
由 Heiko Schocher 提交于
- booting from NOR Flash with direct boot method - POST support - LOGBUF support Signed-off-by: NHeiko Schocher <hs@denx.de> Cc: Paulraj Sandeep <s-paulraj@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Christian Riesch <christian.riesch@omicron.at>
-
由 Marek Vasut 提交于
The board is unmaintained and maintainer doesn't respond. Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de>
-
由 Marek Vasut 提交于
The board is unmaintained and maintainer doesn't respond. Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de>
-
由 Tim Schendekehl 提交于
Add support for the Ethernut 5 open hardware design, based on Atmel's AT91SAM9XE512 SoC. V4 - Fix several coding style issues. - Move machine type to config file. - Remove use of CONFIG_ATMEL_LEGACY. Signed-off-by: NTim Schendekehl <tim.schendekehl@egnite.de>
-
由 Simon Guinot 提交于
This patch adds support for the LaCie 2Big Network v2 board, based on the Marvell Kirkwood 6281 SoC. Additional information is available at: http://lacie-nas.org/doku.php?id=2big_network_v2Signed-off-by: NSimon Guinot <simon.guinot@sequanux.org>
-
由 Thomas Weber 提交于
Signed-off-by: NThomas Weber <weber@corscience.de>
-
- 02 12月, 2011 1 次提交
-
-
由 Nobuhiro Iwamatsu 提交于
The ecovec board has SH7724, 256MB DDR2-SDRAM, USB, Ethernet, and more. This patch supports the following functions: - 256MB DDR2-SDRAM - USB - I2C - Ethernet Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 01 12月, 2011 1 次提交
-
-
由 Dirk Eibach 提交于
Board support for the Guntermann & Drunck Io64. Signed-off-by: NDirk Eibach <eibach@gdsys.de> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 29 11月, 2011 2 次提交
-
-
由 Ira W. Snyder 提交于
This adds support for the Freescale COM Express P2020 board. This board is similar to the P1_P2_RDB, but has some extra (as well as missing) peripherals. Unlike all other mpc85xx boards, it uses a watchdog timeout to reset. Using the HRESET_REQ register does not work. This board has no NOR flash, and can only be booted via SD or SPI. This procedure is documented in Freescale Document Number AN3659 "Booting from On-Chip ROM (eSDHC or eSPI)." Some alternative documentation is provided in Freescale Document Number P2020RM "P2020 QorIQ Integrated Processor Reference Manual" (section 4.5). Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Stelian Pop 提交于
Change my old email address which is no longer valid. Signed-off-by: NStelian Pop <stelian@popies.net> Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
- 28 11月, 2011 1 次提交
-
-
由 Stelian Pop 提交于
Change my old email address which is no longer valid. Signed-off-by: NStelian Pop <stelian@popies.net> Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
- 17 11月, 2011 1 次提交
-
-
由 Wolfgang Denk 提交于
The last maintainer (Eran Man) cannot be reached any more. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 16 11月, 2011 2 次提交
-
-
由 Sricharan 提交于
This patch adds the minimal support for OMAP5. The platform and machine specific headers and sources updated for OMAP5430. OMAP5430 is Texas Instrument's SOC based on ARM Cortex-A15 SMP architecture. It's a dual core SOC with GIC used for interrupt handling and SCU for cache coherency. Also moved some part of code from the basic platform support that can be made common for OMAP4/5. Rest is kept out seperately. The same approach is followed for clocks and emif support in the subsequent patches. Signed-off-by: Nsricharan <r.sricharan@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Cc: Robert Schwebel <robert@schwebel.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
-
- 11 11月, 2011 1 次提交
-
-
由 Marek Vasut 提交于
This contains support for the following components: - DUART - MMC - Both FEC interfaces - NAND - I2C (RTC, EEPROM) - SPI (FLASH) Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
-
- 10 11月, 2011 2 次提交
-
-
由 Tom Rini 提交于
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: NTom Rini <trini@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Macpaul Lin 提交于
Add ADP-AG101P into MAINTAINERS list. Add ADP-AG101P into boards.cfg. Signed-off-by: NMacpaul Lin <macpaul@andestech.com>
-
- 05 11月, 2011 1 次提交
-
-
由 Michael Jones 提交于
Add support for the MATRIX VISION mvBlueLYNX-X, an OMAP3-based intelligent camera. Signed-off-by: NMichael Jones <michael.jones@matrix-vision.de> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
- 04 11月, 2011 3 次提交
-
-
由 Heiko Schocher 提交于
- DM368 SOC - booting with spl not with UBL from TI - before loading u-boot from NAND into RAM, test the RAM with the post memory test. If error is found, switch all LEDs on and halt system. - SPI Flash Dataflash Typ: M25PE80 - Ethernet DM9161BI - MMC - USB Signed-off-by: NHeiko Schocher <hs@denx.de> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Helmut Raiger 提交于
This adds basic board support for TT-01 based on the Bluetechnix i.MX31 SOM. Currently only NOR-Flash boot is implemented. Signed-off-by: NHelmut Raiger <helmut.raiger@hale.at> Acked-by: NStefano Babic <sbabic@denx.de>
-
由 Stefano Babic 提交于
The flea3 board is a custom board by CarMediaLab used in automotive. Network (FEC), NOR, NAND and SPI are supported. Signed-off-by: NStefano Babic <sbabic@denx.de>
-
- 28 10月, 2011 3 次提交
-
-
由 Rob Herring 提交于
Add basic support for Calxeda Highbank platform. Only minimal support with serial and SATA are included. Signed-off-by: NJason Hobbs <jason.hobbs@calxeda.com> Signed-off-by: NRob Herring <rob.herring@calxeda.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
-
由 Chandan Nath 提交于
This patch adds basic support for booting the board. This patch adds support for the UART necessary to get to the u-boot prompt. Signed-off-by: NChandan Nath <chandan.nath@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Jason Cooper 提交于
Copied wholeheartedly from board/Marvell/guruplug and modified to add support for SPI NOR flash. CONFIG_MACH_DREAMPLUG defined in include/configs/dreamplug.h until Linus's kernel.org tree adds it to mach-types.h. Once it trickles down, the definition can be removed from include/configs/dreamplug.h. Signed-off-by: NJason Cooper <u-boot@lakedaemon.net>
-
- 23 10月, 2011 1 次提交
-
-
由 Wolfgang Denk 提交于
The board stopped building some time ago, and the board maintainer agrtees to drop it - see http://article.gmane.org/gmane.comp.boot-loaders.u-boot/112674Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Alex Dubov <oakad@yahoo.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Kumar Gala <galak@kernel.crashing.org>
-
- 22 10月, 2011 1 次提交
-
-
由 Macpaul Lin 提交于
Add evaluation board "adp-ag101" configuration file adp-ag101.h. Add adp-ag101.c board config and related settings. Add board adp-ag101 into boards.cfg Signed-off-by: NMacpaul Lin <macpaul@andestech.com>
-
- 12 10月, 2011 1 次提交
-
-
由 Xiangfu Liu 提交于
Add support for the qi_lb60 (a.k.a QI Ben NanoNote) clamshell device from Qi hardware: http://en.qi-hardware.com/wiki/Ben_NanoNote http://en.qi-hardware.com/wiki/Main_Page http://en.wikipedia.org/wiki/Qi_hardware This Jz4740-based clamshell device does not use NOR flash to boot. The initial bring-up assumes that U-Boot is directly loaded into SDRAM using USB boot tool, and starts from 0x80100000. About USB boot tool ------------------- Jz4740 is one of the XBurst processors with USB boot functionality supported. The CPU can boot from a small ROM in the LSI, initialize CPU and USB module, then wait for USB commands from the USB host. We can send 8 KB binary data to the CPU cache using USB boot tool. USB boot tool is available to the public at Ingenic website. Also there is an alternative Debian package named xburst-tools. Signed-off-by: NXiangfu Liu <xiangfu@openmobilefree.net> Acked-by: NDaniel <zpxu@ingenic.cn> Signed-off-by: NShinya Kuribayashi <skuribay@pobox.com>
-
- 02 10月, 2011 2 次提交
-
-
由 Paul Gortmaker 提交于
The EST SBC8260 is over 10 years old, and the SBC8240 older than that. With the tiny amount of RAM (by today's standards), there really isn't anyone interested in running the latest U-boot on these EOL products anymore. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> CC: jon.diekema@smiths-aerospace.com
-
由 Paul Gortmaker 提交于
This e-mail address is no longer valid, and the boards are long since EOL. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 01 10月, 2011 3 次提交
-
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de>
-
由 Fabio Estevam 提交于
Add the initial support for MX25PDK booting from SD card via internal boot. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
-
由 Aneesh V 提交于
Steve wants to transfer maintainership of OMAP4 boards to me as he is not working on these boards lately. CC: Steve Sakoman <steve@sakoman.com> CC: Sandeep Paulraj <s-paulraj@ti.com> CC: Albert Aribaud <albert.u.boot@aribaud.net> CC: Wolfgang Denk <wd@denx.de> Signed-off-by: NAneesh V <aneesh@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
- 27 9月, 2011 1 次提交
-
-
由 Albert ARIBAUD 提交于
Signed-off-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: NStefan Roese <sr@denx.de>
-
- 08 9月, 2011 3 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Rolf Offermanns <rof@sysgo.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Thomas Elste <info@elste.org>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Alex Züpke <azu@sysgo.de>
-