- 09 10月, 2018 16 次提交
-
-
由 Simon Glass 提交于
There is no reason why this feature should not be supported for uclass- private data. Update the code accordingly. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present sandbox sets non-blocking I/O as soon as any input is read from the terminal. However it does not restore the previous state on exit. Fix this and drop the old os_read_no_block() function. This means that we always enable blocking I/O in sandbox (if input is a terminal) whereas previously it would only happen on the first call to tstc() or getc(). However, the difference is likely not important. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Now that we don't have to deal with the command-line flag we can simplify the code for detecting the emulator. Remove the lookup based on the SPI specification, relying just on the device tree to locate the emulator. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This driver was originally written against Chromium OS circa 2012. A few new features have been added. Enhance the TPM driver to match. This mostly includes a few new messages and properly modelling whether a particular 'space' is present or not. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Use an enum for command values instead of open-coding them. This removes the need for comments. Also make sure the driver returns proper error numbers instead of -1. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present sandbox assumes that device-tree control is active, but this may not be the case in SPL or TPL. Add some conditions to handle this. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Add support for the debug UART so that sandbox provides build testing for this feature. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present there are many situations where sandbox syncs the display to the SDL frame buffer. This is a very expensive operation but is only needed every now and then. Update video_sync() so that we can specify whether this operation is really needed. At present this flag is not used on other architectures. It could also be used for reducing writeback-cache flushes but the benefit of that would need to be investigated. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NAnatolij Gustschin <agust@denx.de>
-
由 Simon Glass 提交于
Add logging to aid debugging features in these drivers. Also drop some code in sandbox_spi_xfer() which is not used. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
When debugging sandbox it is sometimes annoying that the memory file is deleted early on. If sandbox later crashes or we quit (using the debugger), it is not possible to run it again with the same state since the memory file is gone. Remove the old memory file when sandbox exits, instead. Also add debugging showing the memory filename. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
It is useful to be able to set the default log level from the command line when running sandbox. Add a new -L command-line flag for this. The log level is set using the enum log_level_t in log.h. At present a number must be specified, e.g. -L7 for debug. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present we support booting from SPL to U-Boot proper. Add support for the previous stage too, so sandbox can be started with TPL. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present we support specifying SPI flash devices to use in the device tree and on the command line. Drop the second option, since it is a pain to support nicely with driver model, and unnecessary. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
For debugging it is sometimes useful to write out data for inspection using an external tool. Add a function which can write this data to a given file. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present files are not truncated on writing. This is a useful feature. Add support for this. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present to output a log message you need something like: log(UCLASS_SPI, LOCL_INFO, "message1"); log(UCLASS_SPI, LOCL_INFO, "message2"); but many files use the same category throughout. Also it is helpful to shorten the length of log names, providing helpers for common logging levels. Add some macros so that it is possible to do: (top of file, before #includes) #define LOG_CATEGORY UCLASS_SPI (later in the file) log_info("message1"); log_debug("message2"); log_err("message3"); Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 08 10月, 2018 20 次提交
-
-
由 Simon Glass 提交于
This macro should have two parameters, not one. Fix it so that it correctly resolves to _ret when logging is disabled. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Marek Vasut 提交于
Of CONFIG_OF_TRANSLATE is enabled, this function still returns untranslated bogus results. Add the missing translation. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Marek Vasut 提交于
The size should be decoded using of_n_size_cells(), make it so. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present the tests run one after the other using a single CPU. This is not very efficient. Bring in the concurrencytest module and run the tests concurrently, using one process for each CPU by default. A -P option allows this to be overridden, which is necessary for code-coverage to function correctly. This requires fixing a few tests which are currently not fully independent. At some point we might consider doing this across all pytests in U-Boot. There is a pytest version that supports specifying the number of processes to use, but it did not work for me. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
We only need to run driver-model tests with this config, since this is the only thing that is different when CONFIG_OF_LIVE is not defined. Filter out the other tests to same time. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present calling Uninit() always called ClearProgress() which outputs a \r character as well as spaces to remove any progress information on the line. This can mess up the normal output of binman and other tools. Fix this by outputing this only when progress information has actually been previous written. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This variable is not documented or set up in the module. Fix this. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
There are a few test cases which print output. Suppress this so that tests can run silently in the normal case. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present this test runs binman twice, which means that the temporary files from the first run do not get cleaned up. Split this into two tests to fix this problem. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present 'make check' leaves some temporary directories around. Part of this is because we call tools.PrepareOutputDir() twice in some cases, without calling tools.FinaliseOutputDir() in between. Fix this. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This module is often available in the sandbox_spl build created by 'make check'. Use this as a default path so that just typing 'binman -t' (without setting PYTHONPATH) will generally run the tests. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
The 'result' variable counts the number of failures in running the tests. Rename it to 'failures' to make this more obvious. Also tidy up a few comments. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present the tests are run without any indication of what is running. For the tests which start with a build this is pretty obvious, but for tools it is not. Add a name for each test we run, and print it before starting the test. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Use 'export' to avoid repeating the path setup for each command. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present we use 'make tests' to run the tests. For many projects 'make check' is more common, so support that as well. Also add some help to 'make help'. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
The filenames of the toolchains on kernel.org changes every now and then. Fix it for the current change, and make the test use a regex so that it has a better chance of passing with future changes too. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present the unicode filtering seems to get confused at times with this error: UnicodeDecodeError: 'ascii' codec can't decode byte 0x80 in position 32: ordinal not in range(128) It seems to be due to self._nonprint being interpreted as UTF-8. Fix it by using ordinals instead of characters, changing the string to set. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NStephen Warren <swarren@nvidia.com> Tested-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Simon Glass 提交于
With Python 2.7.15rc1, ConfigParser.SafeConfigParser has unfortunately started returning unicode, for unknown reasons. Adjust the code to handle this by converting everything to unicode. We cannot convert things to ASCII since email addresses may be encoded with UTF-8. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
On my Ubuntu 18.04.1 machine two driver-model bus tests have started failing recently. The problem appears to be that the DATA region of the executable is protected. This does not seem correct, but perhaps there is a reason. To work around it, unprotect the regions in these tests before accessing them. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Jens Wiklander 提交于
Enables cmd_avb and its dependencies need to run the AVB tests. Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NJens Wiklander <jens.wiklander@linaro.org> [trini: Disable for sandbox_noblk] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 07 10月, 2018 4 次提交
-
-
由 Jens Wiklander 提交于
Change get_sector_buf() to use map_sysmem() to get a pointer to the CONFIG_FASTBOOT_BUF_ADDR in memory. Signed-off-by: NJens Wiklander <jens.wiklander@linaro.org> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Jens Wiklander 提交于
Update the pymark.buildconfigspec to depend on 'cmd_mmc' in addition to 'cmd_avb' for those tests that needs more a more complete MMC implementation or the "mmc" command. Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NJens Wiklander <jens.wiklander@linaro.org>
-
由 Jens Wiklander 提交于
With CONFIG_OPTEE_TA_AVB use the trusted application AVB provided by OP-TEE to manage rollback indexes and device-lock status. Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NJens Wiklander <jens.wiklander@linaro.org>
-
由 Jens Wiklander 提交于
Tests the TEE uclass with a sandbox tee driver. Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NJens Wiklander <jens.wiklander@linaro.org> [trini: initialize session to 0 in dm_test_tee] Signed-off-by: NTom Rini <trini@konsulko.com>
-