Add device tree for P5040DS board and enable CONFIG_OF_CONTROL
so that device tree can be compiled.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

Add device tree for P4080DS board and enable CONFIG_OF_CONTROL
so that device tree can be compiled.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

Add device tree for P3041DS board and enable CONFIG_OF_CONTROL
so that device tree can be compiled.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

Add device tree for P1041RDB board and enable CONFIG_OF_CONTROL
so that device tree can be compiled.
Update board README for device tree usage.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

Add device tree for P1020RDB boards and enable CONFIG_OF_CONTROL
so that device tree can be compiled.
Update board README for device tree usage.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

Add device tree for P1020RDB boards and enable CONFIG_OF_CONTROL
so that device tree can be compiled.
Update board README for device tree usage.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

Add device tree for T1042D4RDB board and enable CONFIG_OF_CONTROL
so that device tree can be compiled.
Update board README for device tree usage.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

Add device tree for T1024RDB board and enable CONFIG_OF_CONTROL
so that device tree can be compiled.
Update board README for device tree usage.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

Add device tree for T4240RDB board and enable CONFIG_OF_CONTROL
so that device tree can be compiled.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

Add device tree for T2080RDB board and enable CONFIG_OF_CONTROL
so that device tree can be compiled.
Update board README for device tree usage.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

The current Makefile always use u-boot.bin to generate
PBL boot image (u-boot.pbl), this patch changes it to
use u-boot-with-dtb.bin to support device tree when
CONFIG_OF_SEPARATE is enabled.
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

add DM_I2C support for this driver.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

This converts the following to Kconfig:
   CONFIG_SYS_SPI_U_BOOT_OFFS
Signed-off-by: NHannes Schmelzer <hannes.schmelzer@br-automation.com>
[trini: Expose this for SPL_SPI_SUNXI for now]
Signed-off-by: NTom Rini <trini@konsulko.com>

the x530 board needs conversion of SPL_SPI_LOAD to Kconfig first
Signed-off-by: NHannes Schmelzer <hannes.schmelzer@br-automation.com>
Reviewed-by: NChris Packham <chris.packham@alliedtelesis.co.nz>

Exact two boards are referencing CONFIG_SYS_SPI_U_BOOT_OFFS to another
define, we replace this manually with the value for having a clean run
of moveconfig.py afterwards.
Signed-off-by: NHannes Schmelzer <hannes.schmelzer@br-automation.com>

some boards have common headers for several individual build-targets
where CONFIG_SYS_SPI_U_BOOT_OFFS is defined even it is not needed (only
needed if CONFIG_SPL_SPI_LOAD is defined also). Take this define here
under '#ifdef CONFIG_SPL_SPI_LOAD' for having a clean run of
moveconfig.py
Signed-off-by: NHannes Schmelzer <hannes.schmelzer@br-automation.com>

Some boards have coded this offset with formula or bitshifts in their
board-config. Manually convert these things into hex-values to be able
using moveconfig.py afterwards.
Signed-off-by: NHannes Schmelzer <hannes.schmelzer@br-automation.com>

Convert CONFIG_SYS_NAND_USE_FLASH_BBT to Kconfig, update defconfigs,
headers and whitelist.

Please note that this symbol already was used in Kconfig
(imply in CONFIG_NAND_ATMEL) which did not work, since this symbol was
not available in Kconfig. This changes now with this patch and all
boards with CONFIG_NAND_ATMEL will have BBT enabled. Which is what
I also need on my GARDENA AT91SAM based board.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
[trini: Rework such that the configs are unchanged to start with]
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_ARCH_CPU_INIT
Signed-off-by: NAdam Ford <aford173@gmail.com>
Acked-by: NChris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: NFelix Brack <fb@ltec.ch>

Rsync all defconfig files using moveconfig.py
Signed-off-by: NTom Rini <trini@konsulko.com>

- remove rk3288 fennec board
- remove SPL raw image support for Rockchip SoCs
- add common misc_init_r() for ethaddr from cpuid
- enable USB HOST support for rk3328
- unify code for finding a valid gpt in part driver

- Migrate CONFIG_MX_CYCLIC, CONFIG_FSL_USDHC and CONFIG_MXS_GPIO to
  Kconfig
- Fix some SPL/TPL and ARM64 dependencies

This converts the following to Kconfig:
   CONFIG_MX_CYCLIC
Signed-off-by: NAdam Ford <aford173@gmail.com>
Acked-by: NDavid Lechner <david@lechnology.com>

This converts the following to Kconfig:
   CONFIG_FSL_USDHC
Signed-off-by: NAdam Ford <aford173@gmail.com>
[trini: Add IMX8M, TARGET_S32V234EVB to FSL_USDHC list]
Signed-off-by: NTom Rini <trini@konsulko.com>

Several options are presenting themselves on a various boards
where the options are clearly not used.  (ie, arm64 options on
arm9, or SPL/TPL options when SPL or TPL are not defined)

This patch is not attempting to be a complete list of items, but
more like low hanging fruit.

This patch attempts to reduce some of the menuconfig noise
by defining dependencies so they don't appear when not used.
Signed-off-by: NAdam Ford <aford173@gmail.com>

This converts the following to Kconfig:
   CONFIG_MXS_GPIO

Travis-CI: https://travis-ci.org/lmajewski/u-boot-dfu/builds/571260789Signed-off-by: NLukasz Majewski <lukma@denx.de>
Acked-by: NPeng Fan <peng.fan@nxp.com>
Acked-by: NJagan Teki <jagan@amarulasolutions.com>

This was changed to 1 in commit 0717dde0, but a few months later,
commit 5f9411af swapped the order of eMMC and SD card by assigning
indexed aliases to `&sdhci` and `&sdmmc`.
Signed-off-by: NMax Kellermann <max.kellermann@gmail.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>
(Add signature)
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>

Some ChromeOS devices (atleast veyron speedy) have the first 8MiB of
the eMMC write protected and equipped with a dummy 'IGNOREME' GPT
header - instead of spewing error messages about it, just silently
try the backup GPT.

Note: this does not touch the gpt cmd writing/verifying functions,
those will still complain.
Signed-off-by: NUrja Rannikko <urjaman@gmail.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

There were 3 copies of the same sequence, make it into a function.
Signed-off-by: NUrja Rannikko <urjaman@gmail.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

We should use the shared helpers to setup the necessary parts
Signed-off-by: NRohan Garg <rohan.garg@collabora.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

This enables us to set a static MAC address
Signed-off-by: NRohan Garg <rohan.garg@collabora.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

Generate a MAC address based on the cpuid available in the efuse
block: Use the first 6 byte of the cpuid's SHA256 hash and set the
locally administered bits. Also ensure that the multicast bit is
cleared.

The MAC address is only generated and set if there is no ethaddr
present in the saved environment.

This is based off of Klaus Goger's work in 8adc9d
Signed-off-by: NRohan Garg <rohan.garg@collabora.com>
Reviewed-by: NKever Yang <kever.yang@rock-chips.com>

Since there is no one using this board, remove it.
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>

RK3399 SPL only support FIT image for ATF bl31.
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>

RK3368 SPL only support FIT image for ATF bl31.
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>

RK3328 SPL only support FIT image for ATF bl31.
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>

Use Kconfig for option SYS_MALLOC_LEN and default to 0x2000000.
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>

According to rock64 schemetic, both VCC_HOST1_5V and VCC_HOST_5V are
controlled by USB20_HOST_DRV(GPIO0A2), fix it so that we can get correct
power supply for USB HOST ports.
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>

Move all the nodes only shown in u-boot to -u-boot.dtsi to make
rk3328.dtsi clean.
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>