- 20 7月, 2018 6 次提交
-
-
由 Yaniv Levinsky 提交于
The function set_default_env() sets the hashtable flags for import_r(). Formally set_default_env() doesn't accept flags from its callers. In practice the caller can (un)set the H_INTERACTIVE flag, but it has to be done using the first character of the function's string argument. Other flags like H_FORCE can't be set by the caller. Change the function to accept flags argument. The benefits are: 1. The caller will have to explicitly set the H_INTERACTIVE flag, instead of un-setting it using a special char in a string. 2. Add the ability to propagate flags from the caller to himport(), especially the H_FORCE flag from do_env_default() in nvedit.c that currently gets ignored for "env default -a -f" commands. 3. Flags and messages will not be coupled together. A caller will be able to set flags without passing a string and vice versa. Please note: The propagation of H_FORCE from do_env_default() does not introduce any functional changes, because currently himport_r() is set to destroy the old environment regardless if H_FORCE flag is set or not. More changes are needed to utilize the propagation of H_FORCE. Signed-off-by: NYaniv Levinsky <yaniv.levinsky@compulab.co.il> Acked-by: NIgor Grinberg <grinberg@compulab.co.il>
-
由 Yaniv Levinsky 提交于
The function set_default_vars() in common.c adds H_INTERACTIVE to the h_import() flag, but the function has no way of telling if the command actually was user directed like this flag suggest. The flag should be set by the calling function do_env_default() in nvedit.c instead, where the command is certainty user directed. Move the H_INTERACTIVE flag from set_default_vars() to do_env_default(). Signed-off-by: NYaniv Levinsky <yaniv.levinsky@compulab.co.il> Acked-by: NIgor Grinberg <grinberg@compulab.co.il>
-
由 Yaniv Levinsky 提交于
The env_flag in do_env_default() doesn't get propagated and therefore gets ignored by himport_r(). This breaks to ability to "forcibly" reset variables to their default values using the environment command. Scenario example of the problem: # setenv kernel uImage # setenv .flags kernel:so # env default -f kernel ## Error: Can't overwrite "kernel" himport_r: can't insert "kernel=zImage" into hash table Change the call path so it will pass the flag correctly. Signed-off-by: NYaniv Levinsky <yaniv.levinsky@compulab.co.il> Acked-by: NIgor Grinberg <grinberg@compulab.co.il>
-
由 Yaniv Levinsky 提交于
The naming convention for flags in nvedit.c is: * The hashtable flag (defined in search.h) is named "env_flag" * The command flag argument (defined in command.h) is named "flag" This convention is kept in functions like do_env_print(), do_env_set() and do_env_delete(), but not in do_env_default(). Rename the hashtable flag in do_env_default() from "flag" to "env_flag". Rename the command flag in do_env_default() from "__flag" to "flag". No functional change. Signed-off-by: NYaniv Levinsky <yaniv.levinsky@compulab.co.il> Reviewed-by: NIgor Grinberg <grinberg@compulab.co.il>
-
由 Alex Kiernan 提交于
When sourcing a FIT format script, if we've not been told the unit name to use, look for a default property at the root of /images to work out which unit we should use. Signed-off-by: NAlex Kiernan <alex.kiernan@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Ramon Fried 提交于
Add ut_assertnull macro to include/test/ut.h For testing of functions that returns NULL on errors. Signed-off-by: NRamon Fried <ramon.fried@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 19 7月, 2018 34 次提交
-
-
git://git.denx.de/u-boot-microblaze由 Tom Rini 提交于
Xilinx changes for v2018.09 clk: - Fix zynqmp clock driver common: - Handle CMD_RET_USAGE in cmd_process_error - Use return macros in cmd_process_error - Fix duplication of CONFIG_SYS_PROMPT_HUSH_PS2 - Support watchdog in usb_kbd.c - Fix name usage in usb_kbd.c - Support systems with non zero memory start initialized from DT only gpio: - Add support for manual relocation in uclass - zynq - use live tree - zynq - fix match data reading - zynq - setup bank name - xilinx - convert driver to DM microblaze: - Use generic iounmap/ioremap implementations - Redesign reset logic with sysreset features - Use watchdog and gpio over DM - Remove unused macros and fix some checkpatch issues - Fix timer initialization not to be called twice serial: - zynq - Use platdata intead of priv data sysreset: - Add support for manual relocation in uclass - Add gpio-restart driver - Add microblaze soft reset driver watchdog: - Add support for aliases in uclass - Add support for manual relocation in uclass - Convert xilinx driver to DM - cadence - update info in the driver and not stop wdt in probe xilinx: - Enable LED gpio for some targets with gpio-leds DT node - Setup variables via Kconfig zynq: - Add support for watchdog aliases - Add support for mini nand/nor configurations - Wire FPGA initalization in SPL zynqmp: - Enable mass storage for zcu100 - Handle external pmufw files - Add support for secure images - Some Kconfig movements and alignments - Add support for watchdog aliases - Use subcommands style for platform command - Add mmio_read/write platform commands - DT updates - Add support for mini qspi configuration
-
由 Luis Araneda 提交于
commit 4aba5fb8 ("arm: zynq: Rework FPGA initialization") moved FPGA initialization from board_init() to arch_early_init_r(), which is not called as part of the SPL Fix this by calling arch_early_init_r() in the spl_board_init() function, so the FPGA is correctly initialized Signed-off-by: NLuis Araneda <luaraneda@gmail.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Luis Araneda 提交于
Disable the use of function zynq_loadfs when compiling the driver for the SPL, as the following filesystem functions are not found by the linker: - fs_set_blk_dev - fs_read - fs_set_blk_dev - fs_read - fs_read Signed-off-by: NLuis Araneda <luaraneda@gmail.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Luis Araneda 提交于
A message should be displayed if an image is loaded to an FPGA, because the hardware might have changed, and the user should be informed Signed-off-by: NLuis Araneda <luaraneda@gmail.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Mini targets are using different ENV_SIZE then standard one that's why defconfigs should be updated to simplify config files. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
Add configuration files/dtses for mini u-boot configuration which runs on smaller footprint of internal memory. This configuration has only required qspi flash support and it uses DCC as serial. Signed-off-by: NSiva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Simplify zynq_cse config by setting up ENV_SIZE via Kconfig. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Vipul Kumar 提交于
This patch added support to enable CONFIG_ENV_SIZE, CONFIG_ENV_OFFSET and CONFIG_ENV_SECT_SIZE through Kconfig for Zynq and Zynqmp. Signed-off-by: NVipul Kumar <vipul.kumar@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
Add configuration files/dtses for mini u-boot configuration which runs on smaller footprint OCM memory. This configuration only has required parallel nor flash support. Signed-off-by: NSiva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
Add configuration files/dtses for mini u-boot configuration which runs on smaller footprint of memory. This configuration has only required nand flash support. Signed-off-by: NSiva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
Remove the SDRAM_BASE and SDRAM_SIZE as it can now get these details from DT. Signed-off-by: NSiva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
This patch renames the routine fdtdec_setup_memory_size() to fdtdec_setup_mem_size_base() as it now fills the mem base as well along with size. Signed-off-by: NSiva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
This patch updates the ram_base to store the start address of the first bank DRAM and the use this ram_base to calculate ram_top properly. This patch fixes the erroneous calculation of ram_top incase of non zero ram start address. Signed-off-by: NSiva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Michal Simek 提交于
XILINX_SPI_FLASH_BASEADDR logic has been converted to DM that's why there is no reason to depend on this address anymore. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Watchdog can be started before probe and u-boot should just take control over it. That's why do not stop watchdog in probe to cover cases where watchdog can expire before probe and start. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Vipul Kumar 提交于
This patch added support of mmio read and write commands. These commands can be used to read and write registers from the u-boot command line. It can be useful in debugging. Signed-off-by: NVipul Kumar <vipul.kumar@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Enable led support for boards which have "gpio-leds" node. And also for microblaze which is converted to DM_GPIO now. Tested on zcu100. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
IP itself has no reg/no bit which can be used for this functionality. Add this note to the driver to make sure that none will be asking for that. Current method is to setup 1s timeout and hang() which is done via wdt_expire_now(). Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
There is no reason to save variables to flash only. Select option via Kconfig instead. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Converting GPIO to DM requires to do changes in reset subsystem that's why support for Microblaze soft reset via sysreset and GPIO sysreset support was added. These two patches enables enabling GPIO DM. Microblaze soft reset is bind at last reset method. GPIO reset is handled via sysreset with adding this fragment to DT. gpio-restart { compatible = "gpio-restart"; gpios = <&reset_gpio 0 0 0>; /* 3rd cell ACTIVE_HIGH = 0, ACTIVE_LOW = 1 */ }; hard-reset-gpio property is not documented and also handled. Conversion is required. Unfortunately do_reset is required for SPL that's why use only soft microblaze reset for now. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
There is only one chipselect on each connector. Define it directly in board dts file. There should be an option to use more chipselects via gpios. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
DM watchdog should be enabled by default. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Shreenidhi Shedi 提交于
Xilinx Axi wdt driver conversion to driver model & Kconfig update for the same. Signed-off-by: NShreenidhi Shedi <yesshedi@gmail.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Shreenidhi Shedi 提交于
We should support watchdog reset so that WATCHDOG_RESET will function properly. Signed-off-by: NShreenidhi Shedi <yesshedi@gmail.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Shreenidhi Shedi 提交于
These macros are not required anymore. These will be taken from configuration file. Signed-off-by: NShreenidhi Shedi <yesshedi@gmail.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Shreenidhi Shedi 提交于
Signed-off-by: NShreenidhi Shedi <yesshedi@gmail.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Vipul Kumar 提交于
This patch changed zynqmp command to handle subcommands with U_BOOT_CMD_MKENT. Signed-off-by: NVipul Kumar <vipul.kumar@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
This patch is enabling GPIO_DM support to have an option to use this driver together with zynq gpio driver. !DM part is kept there till Microblaze is cleanup which will be done hopefully soon. Just a note: There is no reason to initialize uc-priv->name because it is completely unused. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Microblaze is storing reset vector at address 0x0. It means soft reset can be done by just jumping to this address. This code was in platform code but sysreset interface is providing enough capabilities to have more options how to reset the system. It can go from gpio reset through watchdog reset till soft reset. The driver has not compatible string because this is cpu specific and DM core is not able to detect compatible string in DT root that's why this driver will be instantiated from platform code by calling device_bind_driver(gd->dm_root, "mb_soft_reset", "reset_soft", NULL); It should be bind as the last reset method to ensure that hw reset is called before this. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
The Linux kernel has binding for gpio-restart node. This patch is adding basic support without supporting any optional properties. This driver was tested on Microblaze system where gpio is connected to SoC reset logic. Output value is handled via gpios cells values. In gpio_reboot_request() set_value is writing 1 because dm_gpio_set_value() is capable to changing it when it is ACTIVE_LOW. ... if (desc->flags & GPIOD_ACTIVE_LOW) value = !value; ... Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Michal Simek 提交于
The same change as was done for zynqmp with this description: Add support for enabling the first watchdog pointed via aliases. DT fragment: aliases { ... watchdog0= &watchdog0; watchdog1 = &watchdog_lpd; ... }; <zynqmp example removed> Till this patch the first watchdog found in DT was used and started which is not enabling all possible configuration based on user request. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Add support for enabling the first watchdog pointed via aliases. DT fragment: aliases { ... watchdog0 = &watchdog0; watchdog1 = &watchdog_lpd; ... }; dm tree fragment for above configuration with patch applied: ZynqMP> dm tree Class index Probed Driver Name ----------------------------------------- ... watchdog 0 [ ] cdns_wdt | |-- watchdog@ff150000 watchdog 1 [ + ] cdns_wdt | `-- watchdog@fd4d0000 ... dm uclass fragment: ZynqMP> dm uclass ... uclass 75: watchdog 0 watchdog@ff150000 @ 7df02f40, seq -1, (req 1) 1 * watchdog@fd4d0000 @ 7df02ff0, seq 0, (req 0) ... It is visible that index 1 is IP with seq 0 which means that FPD watchdog (@fd4d0000) is in DT below LPD watchdog (@ff150000). Till this patch the first watchdog found in DT was used and started which is not enabling all possible configuration based on user request. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
There should be proper bank name setup to distinguish between different gpio drivers. Use dev->name for it. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Michal Simek 提交于
Timer needs to be converted to DM but as of now it can't be called so early because intc controller is not ready. Call it later in board_r.c. Before this patch timer_init is called twice which is wrong. The patch is blocking initialization before relocation. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-