Signed-off-by: NTom Rini <trini@konsulko.com>

In drivers we use a family of printing functions including pr_err() and
pr_cont(). CONFIG_LOGLEVEL is used to control which of these lead to output
via printf().

Our logging functions allow finer grained control of output. So replace
printf() by the matching logging functions. The usage of CONFIG_LOGLEVEL
remains unchanged.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

When the btrfs_read_fs_root() function is searching a ROOT_ITEM with
location key offset other than -1, it currently fails via BUG_ON.

The offset can have other value than -1, though. This can happen for
example if a subvolume is renamed:

  $ btrfs subvolume create X && sync
  Create subvolume './X'
  $ btrfs inspect-internal dump-tree /dev/root | grep -B 2 'name: X$
        location key (270 ROOT_ITEM 18446744073709551615) type DIR
        transid 283 data_len 0 name_len 1
        name: X
  $ mv X Y && sync
  $ btrfs inspect-internal dump-tree /dev/root | grep -B 2 'name: Y$
        location key (270 ROOT_ITEM 0) type DIR
        transid 285 data_len 0 name_len 1
        name: Y

As can be seen the offset changed from -1ULL to 0.

Do not fail in this case.
Signed-off-by: NMarek Behún <marek.behun@nic.cz>
Cc: David Sterba <dsterba@suse.com>
Cc: Qu Wenruo <wqu@suse.com>
Cc: Tom Rini <trini@konsulko.com>

As Stephen is no longer actively maintaining the uboot-test-hooks
repository, switch to using the instance on our GitLab.
Acked-by: NStephen Warren <swarren@wwwdotorg.org>
Signed-off-by: NTom Rini <trini@konsulko.com>

The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git
effective 2021-02-28.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Pull request for efi-2021-04-rc3-2

Bug fixes:
* debug build for mkeficapsule
* limit output length for VenHw, VenMedia
* ACPI tables must be in EfiACPIReclaimMemory

- fastboot updates / fixes

- new GigaDevice flash ids
- fixes for imx, nxp_spi drivers

- Add USB host boot support in stm32mp1 config
- Enable uefi related commands for STMicroelectronics STM32MP15 boards
- Remove duplicate uart nodes in stm32mp15 device tree

Add missing GUID short text used in the efidebug tables and efidebug dh
sub-commands.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Correct missing descriptions and typos in efi_loader.h.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

VenHw and VenMedia device path nodes may carry vendor defined data of
arbitrary length. When converting a device path node to text ensure that we
do not overrun our internal buffer.

In our implementation of
EFI_DEVICE_PATH_TO_TEXT_PROTOCOL.ConvertDevicePathToText() we could first
determine the output length and then allocate buffers but that would nearly
double the code size. Therefore keep the preallocated buffers and truncate
excessive device paths instead.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

Fix a missing comma sign (,) from a printf(), that is only
reachable if DEBUG is defined, in which case the build fails with:

    tools/mkeficapsule.c:266:36: error: expected ‘)’ before ‘bin’
      266 |  printf("\tbin: %s\n\ttype: %pUl\n" bin, guid);
          |                                    ^~~~
          |                                    )
Signed-off-by: NKlaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

tools/mkeficapsule.c is used to prepare test files for testing the UEFI
sub-system.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

The UEFI spec does not allow ACPI tables to be in runtime services memory.
It recommends EfiACPIReclaimMemory.

Remove a superfluous check that the allocated pages are 16 byte aligned.
EFI pages are 4 KiB aligned.

Fixes: 86df34d4 ("efi_loader: Install ACPI configuration tables")
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>

The board can boot with UEFI. With the latest changes in U-Boot's
EFI subsystem we also have support for EFI runtime variables, without
SetVariable support.  We can also store the EFI variables in a file on the
ESP partition and preserve them across reboots.
The env and efidebug commands are missing in order to configure
EFI variables and the efibootmgr though.  Since U-Boot's default config
enables other EFI related commands (e.g bootefi), let's add the env related
and efidebug commands and allow users to do that
Signed-off-by: NIlias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: NPatrick Delaunay <patrick.delaunay@foss.st.com>

Remove duplicated uart nodes introduced with commit 62f95af9
("ARM: dts: stm32mp1: DT alignment with Linux kernel v5.9-rc4"),
because the uart nodes wasn't correctly ordered in alphabetic order.

Only cosmetic: the generated device tree don't change.
Signed-off-by: NPatrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: NPatrice Chotard <patrice.chotard@foss.st.com>

Add support for booting from USB pen drive, since USB host port is
available on the STM32MP1.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: NPatrick Delaunay <patrick.delaunay@foss.st.com>

Since commit 8745b9eb ("usb: gadget: add super speed support")
ums was no more functional on platform which use dwc2_udc_otg driver.

This was due to a too restrictive test which checked that the gadget
driver speed was either FS or HS.

So all gadget driver with max speed set to speed higher than
HS (SS in case of composite gadget driver in our case) are not
allowed, which is wrong.

Update the speed test in usb_gadget_register_driver() and in
dwc2_gadget_start() to allow all gadget driver speed equal or higher
than FS.

Tested on stm32mp157c-ev1 board.

Fixes: c791c843 ("usb: dwc2: convert driver to DM_USB_GADGET")
Signed-off-by: NPatrice Chotard <patrice.chotard@foss.st.com>

The OUT endpoint can just be ignored as it is not used, just as the
corresponding Set_Report request for IN-only interfaces. E.g. the
Linux gadget hid keyboard also provides an interrupt endpoint.

Also cleanup confusing debug messages like "found set protocol", which
is printed when a keyboard device is found, while the Set_Protocol request
is issued quite some time later.
Signed-off-by: NStefan Brüns <stefan.bruens@rwth-aachen.de>

add support for the UUU commands ACmd and UCmd.

Enable them through the Kconfig option
CONFIG_FASTBOOT_UUU_SUPPORT

base was commit in NXP kernel
9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support")

and ported it to current mainline. Tested this patch
on imx6ul based board.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Acked-by: NPatrick Delaunay <patrick.delaunay@foss.st.com>

This documents the way U-Boot understands partitions specifications.
This also updates the fastboot documentation for the changes in the
previous commit.
Signed-off-by: NSean Anderson <sean.anderson@seco.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

This anchor is only for the k210 partition layout, so rename it
appropriately. This keeps it from conflicting with the (to be added)
anchor for U-Boot partitions in general.
Signed-off-by: NSean Anderson <sean.anderson@seco.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

This adds support for partitions of the form "dev.hwpart:part" and
"dev#partname". This allows one to flash to eMMC boot partitions without
having to use CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT. It also allows one to
flash to an entire device without needing CONFIG_FASTBOOT_MMC_USER_NAME.
Lastly, one can also flash MMC devices other than
CONFIG_FASTBOOT_FLASH_MMC_DEV.

Because devices can be specified explicitly, CONFIG_FASTBOOT_FLASH_MMC_DEV
is used only when necessary for existing functionality. For those cases,
fastboot_mmc_get_dev has been added as a helper function. This allows

There should be no conflicts with the existing system, but just in case, I
have ordered detection of these names after all existing names.

The fastboot_mmc_part test has been updated for these new names.
Signed-off-by: NSean Anderson <sean.anderson@seco.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

This makes the next commit more readable by doing the move now.
Signed-off-by: NSean Anderson <sean.anderson@seco.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

The only thing mmcpart was used for was to pass to blk_dselect_hwpart.
This calls blk_dselect_hwpart directly from raw_part_get_info_by_name. The
error handling is dropped, but it is reintroduced in the next commit
(albeit less specificly).
Signed-off-by: NSean Anderson <sean.anderson@seco.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

This adds support for things like "#partname" and "0.1#partname". The block
device parsing is done like in blk_get_device_part_str.
Signed-off-by: NSean Anderson <sean.anderson@seco.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

This adds an option to part_get_info_by_dev_and_name_or_num to allow
callers to specify whether whole-disk partitions are fine.
Signed-off-by: NSean Anderson <sean.anderson@seco.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Several functions in disk/part.c just return -1 on error. This makes them
return different errnos for different failures. This helps callers
differentiate between failures, even if they cannot read stdout.
Signed-off-by: NSean Anderson <sean.anderson@seco.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

This test verifies the mapping between fastboot partitions and partitions
as understood by U-Boot. It also tests the creation of GPT partitions,
though that is not the primary goal.
Signed-off-by: NSean Anderson <sean.anderson@seco.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

This adds support writing to the sandbox mmc backed by an in-memory
buffer. The unit test has been updated to test reading, writing, and
erasing. I'm not sure what MMCs erase to; I picked 0, but if it's 0xFF
then that can be easily changed.
Signed-off-by: NSean Anderson <sean.anderson@seco.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

- turris_mox: Enhancements, mostlly defconfig changes (Pali)
- pci-aardvark: Set Max Payload Size and Max Read Request Size
                to 512 bytes (Pali)
- pci_mvebu: Minor cleanup and refactoring (Marek)
- Upgrade A38x DDR3 training to version 14.0.0 (Marek)

The relevant changes to the already existing GD5F1GQ4UExxG support has
been determined by consulting the GigaDevice product change notice
AN-0392-10, version 1.0 from November 30, 2020.

As the overlaps are huge, variable names have been generalized
accordingly.

Apart form the lowered ECC strength (4 instead of 8 bits per 512 bytes),
the new device ID, and the extra quad IO dummy byte, no changes had to
be taken into account.

New hardware features are not supported, namely:
 - Power on reset
 - Unique ID
 - Double transfer rate (DTR)
 - Parameter page
 - Random data quad IO

The inverted semantic of the "driver strength" register bits, defaulting
to 100% instead of 50% for the Q5 devices, got ignored as the driver has
never touched them anyway.

The no longer supported "read from cache during block erase"
functionality is not reflected as the current SPI NAND core does not
support it anyway.

Implementation has been tested on MediaTek MT7688 based GARDENA smart
Gateways using both, GigaDevice GD5F1GQ5UEYIG and GD5F1GQ4UBYIG.
Signed-off-by: NReto Schneider <reto.schneider@husqvarnagroup.com>
Reviewed-by: NStefan Roese <sr@denx.de>
Acked-by: NJagan Teki <jagan@amarulasolutions.com>

The datasheet only lists one dummy byte in the 0xEB operation for the
following chips:
* GD5F1GQ4xExxG
* GD5F1GQ4xFxxG
* GD5F1GQ4UAYIG
* GD5F4GQ4UAYIG

Reto Schneider:
- Linux patch ported to U-Boot
- Checked for compatibility with GD5F1GQ4xBxxG
- Fixed operation code in original commit message (0xEH -> 0xEB)
Signed-off-by: NReto Schneider <reto.schneider@husqvarnagroup.com>
Reviewed-by: NStefan Roese <sr@denx.de>
Acked-by: NJagan Teki <jagan@amarulasolutions.com>

This line should come before the docs for the next function.

Fixes: 7aeedac0 ("mtd: spi: Port SPI NOR framework from Linux")
Signed-off-by: NSean Anderson <seanga2@gmail.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NPratyush Yadav <p.yadav@ti.com>
Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>

The sf test command is used to test spi flashes (and spi masters). Printing
the exact error code is very helpful to those debugging the spi stack.
Signed-off-by: NSean Anderson <seanga2@gmail.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NPratyush Yadav <p.yadav@ti.com>
Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>

If there is an error while erasing SPI flash, no errno is displayed. This
makes it difficult to determine the cause of the error. This change mirrors
the logic for write errors above.
Signed-off-by: NSean Anderson <seanga2@gmail.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
Reviewed-by: NPratyush Yadav <p.yadav@ti.com>
Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>

On the i.MX8M Mini, ret = clk_set_rate() sets ret to the value of the
rate the clock was able to set.  When checking for errors, it only
checks that it is not NULL.  Since positive numbers are not errors,
only check for negative numbers when handling errors.

Fixes: 383fded7 ("spi: nxp_fspi: new driver for the FlexSPI controller")
Signed-off-by: NAdam Ford <aford173@gmail.com>
Reviewed-by: NPratyush Yadav <p.yadav@ti.com>
Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>