This will make CONFIG_NET_MULTI the only net driver configuration and
we'll be able to remove this option.
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

The pin which was used in preliminary versions of the board for ide
reset is really connected to the rtc clock.
Signed-off-by: NDetlev Zundel <dzu@denx.de>

This patch adds, under tools folder, a new command called imls. Its
goal is the same of UBoot's imls but it can be used as Linux shell
command. It reads from raw mtd partition and prints the list of the
stored images.
Signed-off-by: NMarco Stornelli <marco.stornelli@gmail.com>

Fix some issues introduced from commit:
2f70c49e
suggested by Mike Frysinger.

- added some comment for the env_id variable in common_cmd_nvedit.c
- moved some variables in fn scope instead of file scope
- NetInitLoop now static void
Signed-off-by: NHeiko Schocher <hs@denx.de>
Acked-by: NBen Warren <biggerbadderben@gmail.com>

Signed-off-by: NHeiko Schocher <hs@denx.de>

Signed-off-by: NDetlev Zundel <dzu@denx.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>

I never acked a patch that adds me as phycore i.MX31 maintainer nor was
it me who pushed the patches, so remove myself from the maintainer list
so that other people do not longer wait for my ack.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

AFEB9260 uses PA10, PA11 for ETX2 and ETX3.
Also, due to extarnal pull-up on IRQ line, Micrel PHY ID is 1 after reset sequence,
not 0.
Signed-off-by: NSergey Lapin <slapin@ossfans.org>

We don't know what state the ethernet PHY is in when starting up, so make
sure we set it to a sane state.  This fixes troubles seen when Linux boots
up, configures the PHY is a non-default state, and then the system reboots
into U-Boot which previously expected a reset state only.
Signed-off-by: NGraf Yang <graf.yang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The BF527-EZKIT settings for storing the environment in SPI flash wasn't
using the correct sector settings for the SPI flash part that is actually
on the board.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

When the clock functions were changed to use cached values (and thereby
avoiding expensive math functions), early serial debug broke because the
baud programming is called before external memory is available.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

When dropping jump block support, the assumption was that all bootroms
supported entry point redirection via the EVT1 register.  Unfortunately,
this turned out to be incorrect for the oldest Blackfin parts (BF533-0.2
and older and BF561).  No one really noticed earlier because these parts
usually are booted by bypassing the bootrom entirely, and older BF533
parts are not supported at all (too many anomalies).
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Make sure we recurse through serial_putc() rather than bang on the UART
transmit register directly to avoid hardware overflows when using \n.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Update CHANGELOG.
Signed-off-by: NWolfgang Denk <wd@denx.de>

lowlevel_init.S is not used any more so remove it.
As consequence, we also don't have to generate u-boot.lds
but can use a static version as before.

This also fixes the out-of-tree build problem introduced
with commit f0a2c7b4 "at91: add support for the PM9263 board"
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: NWolfgang Denk <wd@denx.de>

Signed-off-by: NWolfgang Denk <wd@denx.de>

Signed-off-by: NDirk Behme <dirk.behme@googlemail.com>
Signed-off-by: NManikandan Pillai <mani.pillai@ti.com>

The Beagle Rev C boards pull UART2 from an alternate set of balls.
Signed-off-by: NSteve Sakoman <steve@sakoman.com>
Signed-off-by: NDirk Behme <dirk.behme@googlemail.com>

Blocks compressed with zlib dont have the full gzip header.

Without this patch, block compressed with zlib cannot be readed!
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@uam.es>

Separate gunzip in

gunzip: Find the end of the header and call zunzip.
zunzip: Inflate gunzip block without header.

UBI fs blocks can be compresed in lzo, zlib or no-compression. The
current implementation of u-boot supported all the compressions but
there was a bug in the implementation of the zlib blocks.

UBIFS's Zlib blocks do not have header but they were compressed using
gunzip, a function used to decompress gunzip files/sectors with a
header.

This patch adds a new function zunzip that uncompress a zlib block with
no header.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@uam.es>

Signed-off-by: NDaniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Let CONFIG_SYS_HZ to have value of 1000 effectively fixing all users of
get_timer.

Changes since original version:
* Set PTV=2 (divisor 8) for boards using 12MHz timer clock source to
  improve timer resolution.
Signed-off-by: NLadislav Michl <ladis@linux-mips.org>

Remove remaining legacy NAND defines for Beagle, EVM, Overo and Pandora.
Signed-off-by: NDirk Behme <dirk.behme@googlemail.com>

The function display_board_info() displays incorrect
silicon revision - based on the return value from
function get_cpu_rev().

This patch fixes the problem.
Signed-off-by: NSanjeev Premi <premi@ti.com>

The board-types defined in struct omap3_sysinfo seem to be
unused. The function display_board_info() is passed
board type as an argument; which is ignored.

This patch removes all uses of board-type, related definitions
and functions.
Signed-off-by: NSanjeev Premi <premi@ti.com>

Use the functions print_cpuinfo() and checkboard() to
display the cpu and board specific information.

These functions reuse content from the existing function
display_board_info() - which has been removed.

Also, updated the existig OMAP3 configurations to
define:
 - CONFIG_DISPLAY_CPUINFO
 - CONFIG_DISPLAY_BOARDINFO
Signed-off-by: NSanjeev Premi <premi@ti.com>

With this patch non-uniform NOR FLASH chips (chips with multiple erase
regions) can be exported via the cfi-mtd layer and therefor used by UBI.
We select the largest sector size as erasesize. The cfi driver will make
sure that the smaller sectors are handled correctly.
Signed-off-by: NStefan Roese <sr@denx.de>

Fix bug in drawing long version/info strings:
U-Boot version string like
"U-Boot 2009.03-05647-g7c51e06 (Apr 23 2009 - 12:40:00) MPC83XX"
is long and doesn't wrap around correctly while drawing
beside the logo. Such long strings partially overwrite
the logo. This patch is an attempt to fix it.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

Get rid of these warnings:

cmd_ext2.c:247: warning: format '%ld' expects type 'long int', but argument 2 has type 'int'
cmd_ext2.c:248: warning: format '%lX' expects type 'long unsigned int', but argument 3 has type 'int'
Signed-off-by: NWolfgang Denk <wd@denx.de>

because legacy NAND support is deprecated converting to current
NAND interface. !This just compile, because I have no more the
hardware to test it.
Signed-off-by: NHeiko Schocher <hs@denx.de>

If the memory used to copy the link_make is "dirty" the string wont
be ended with NULL, throwing out multiple memory bugs.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@uam.es>
Acked-by: NStefan Roese <sr@denx.de>

Add basic error handling to fread() function calls.  This prevents
compililation warnings such as:

bmp_logo.c: In function ‘main’:
bmp_logo.c:71: warning: ignoring return value of ‘fread’, declared with
attribute warn_unused_result
...
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

This prevents the compilation warning:

ncb.c: In function 'main':
ncb.c:32: warning: ignoring return value of ‘write’, declared with
attribute warn_unused_result
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>

With this patch the NAND and OneNAND devices are registered in the MTD
subsystem and can then be referenced by the mtdcore code (e.g.
get_mtd_device_nm()). This is needed for the new "ubi part" command
syntax without the flash type parameter (nor|nand|onenand).
Signed-off-by: NStefan Roese <sr@denx.de>

This patch removes this compilation warning when CONFIG_MTD_PARTITIONS is
defined:

nand_base.c: In function 'nand_release':
nand_base.c:2922: warning: implicit declaration of function 'del_mtd_partitions'
Signed-off-by: NStefan Roese <sr@denx.de>

This patch removes the now unnecessary flash type parameter from the
"ubi part" command. Currently the user has to define the type of flash
he will be using UBI on. Example:

=> ubi part nor partition1

With this patch this type parameter is not needed anymore. The user can
now select the partition directly without the flash type paramter.
Example:

=> ubi part partition1

This breaks backward compatibility right now because of the change in the
command syntax. But UBI support is still quite fresh and the advantage of
this new command is syntax big enough for this change. Additionally the
code is much cleaner now.
Signed-off-by: NStefan Roese <sr@denx.de>
CC: Kyungmin Park <kyungmin.park@samsung.com>