Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

rearrange some #if !defined() / #else / #endif statements to remove
the negative logic.
Signed-off-by: NAndrew Dyer <adyer@righthandtech.com>

Some of multi-function USB controllers (e.g. ISP1562) allow root hub
resetting only via EHCI registers. So, this patch adds the
corresponding kind of reset to OHCI's hc_reset() if the newly
introduced CONFIG_PCI_EHCI_DEVNO option is set (e.g. for Socrates
board).
Signed-off-by: NYuri Tikhonov <yur@emcraft.com>
Acked-by: NMarkus Klotzbuecher <mk@denx.de>

Signed-off-by: NYuri Tikhonov <yur@emcraft.com>

The RSK7203 board has the SMSC9118 wired up 'incorrectly'.
Byte-swapping is necessary, and so poor performance is inevitable.
This problem cannot evade by the swap function of CHIP, this can
evade by software Byte-swapping.
And this has problem by FIFO access only. pkt_data_pull/pkt_data_push
functions necessary to solve this problem.
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Affected boards:
	db64360
	db64460
	katmai
	taihu
	taishan
	yucca
	cpc45
	cpu87
	eXalion
	elppc
	debris
	kvme080
	mpc8315erdb
	integratorap
	ixdp425
	oxc
	pm826
	pm828
	pm854
	pm856
	ppmc7xx
	sc3
	sc520_spunk
	sorcery
	tqm8272
	tqm85xx
	utx8245

Removed initialization of the driver from net/eth.c
Also, wrapped contents of pci_eth_init() by CONFIG_PCI.
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Affected boards:
	cu824
	bab7xx
	adciop
	dasa_sim
	mousse
	mpc8540eval
	musenki
	mvblue
	pcippc2/pcippc6
	sbc8240
	stxssa

Removed initialization of the driver from net/eth.c
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Affected boards:
	ap1000
	mvbc_p
	PM854

Removed initialization of the driver from net/eth.c
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Affected boards:
	purple

Removed initialization of controller from net/eth.c
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Modified board_eth_init() functions of boards that have this FEC in addition
to other Ethernet controllers.

Affected boards:
	bc3450
	icecube
	mvbc_p
	o2dnt
	pm520
	total5200
	tq5200

Removed initialization of controller from net/eth.c
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Added a cpu_eth_init() function to MPC512x CPU directory and
removed code from net/eth.c
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Affected boards:
	IncaIP

Removed initialization of the driver from net/eth.c
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Affected boards:
	PN62
	sc520_cdp

Removed initialization of the driver from net/eth.c
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Affected boards:
	a3000

Removed initialization of the driver from net/eth.c
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Affected boards:
	bc3450
	cpci5200
	mecp5200
	pf2000
	icecube
	o2dnt
	pm520
	sandpoint8245
	total5200
	tqm5200

Removed initialization of the driver from net/eth.c
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Affected boards:
	mpc7448hpc2

Removed initialization of the driver from net/eth.c
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Affected boards:
	hidden_dragon
	MPC8544DS
	MPC8610HPCN
	R2DPLUS
	TB0229

Removed initialization of the driver from net/eth.c
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Affected boards:
	linkstation
	r7780mp

Removed initialization of the driver from net/eth.c
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

This addresses all drivers whose initializers have already
been moved to board_eth_init()/cpu_eth_init().
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Adds support for configuring the TBI to talk properly with the SerDes.
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

The tsec driver contains a hard-coded array of configuration information
for the tsec ethernet controllers.  We create a default function that works
for most tsecs, and allow that to be overridden by board code.  It creates
an array of tsec_info structures, which are then parsed by the corresponding
driver instance to determine configuration.  Also, add regs, miiregs, and
devname fields to the tsec_info structure, so that we don't need the kludgy
"index" parameter.
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

This is to prepare the way for board code passing in the tsec_info structure
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Signed-off-by: NYuri Tikhonov <yur@emcraft.com>
Signed-off-by: NSergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Renesas SH7723 has 5 SCIF, SD, Camera, LCDC and other.
This patch supports CPU register's header file and SCIF serial driver.
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

Signed-off-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

Based on the original S3C64XX NAND driver by Samsung for U-Boot 1.1.6.
Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>

As noted by Harald Welte, HWFLOW support in the S3C64XX serial driver is
broken and currently unused. Remove it.
Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>

Based on the original S3C64XX UART driver by Samsung for U-Boot 1.1.6.
Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>

Notice: USB on S3C6400 currently works _only_ with switched off MMU. One could
try to enable the MMU, but map addresses 1-to-1, and disable data cache, then
it should work too and we could still profit from instruction cache.
Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>

Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

The existing I2C freqency dividers for FDR does not apply
to ColdFire platforms; thus, a seperate table is added
based on MCF5xxx Reference Manual
Signed-off-by: NLuigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
Signed-off-by: NTsiChung Liew <Tsi-Chung.Liew@freescale.com>
Acked-by: NTabi Timur <timur@freescale.com>

The MPC8536 Adds SDHC and SATA controllers to the PQ3 family.  We
also have SERDES init code for the 8536.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NSrikanth Srinivasan <srikanth.srinivasan@freescale.com>
Signed-off-by: NDejan Minic <minic@freescale.com>
Signed-off-by: NJason Jin <Jason.jin@freescale.com>
Signed-off-by: NDave Liu <daveliu@freescale.com>

dm9000 has code to detect and initialize external phy parts, but later
on in the code the part is forced to use the internal phy
unconditionally.  Remove the unused/untested code.

change the GPIO initialization so that only the GPIO used as an
internal phy reset (hardwired in the chip) is set as an output.  The
remaining GPIO need to be handled by board specific code to prevent
possible drive conflicts.  Set as inputs for safety.

replace a few magic numbers with defines
Signed-off-by: NAndrew Dyer <adyer@righthandtech.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Add FEC Buffer descriptors and data buffer in SRAM for
faster execution and access.
Signed-off-by: NTsiChung Liew <Tsi-Chung.Liew@freescale.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Types mismatch and implicit declaration of icache_invalid()
warning messages
Signed-off-by: NTsiChung Liew <Tsi-Chung.Liew@freescale.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>