- 17 9月, 2016 4 次提交
-
-
由 Simon Glass 提交于
Move the SPL settings into common/spl where most of the SPL code is kept. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
The moveconfig tool is quite clever and generally produces results that are suitable for sending as a patch without further work. The main required step is to add the changes to a commit. Add an option to do this automatically. This allows moveconfig to be used from a script to convert multiple CONFIG options, once per commit. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present it is not easy to use moveconfig from a script since it asks for user input a few times. Add a -y option to skip this and assume that 'y' was entered. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Update the defconfig files to match their canonical form, as produced by 'make safedefconfig'. This is the result of running 'tools/moveconfig.py -s' on the tree. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 13 9月, 2016 4 次提交
-
-
由 Wenyou Yang 提交于
Since the 'clk_client.h' doesn't exist, it should be 'clk.h'. Signed-off-by: NWenyou Yang <wenyou.yang@atmel.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 John Keeping 提交于
The special handling of the chip address and register address must only happen before we send the data buffer, otherwise we will end up inserting both of these every 32 bytes. Signed-off-by: NJohn Keeping <john@metanate.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 John Keeping 提交于
There is no point in writing intermediate values to the txdata registers. Also add padding to the debug logging to make it easier to read when there are leading zeroes. Signed-off-by: NJohn Keeping <john@metanate.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 John Keeping 提交于
Make it clear that we are using the same value in two adjacent lines. Signed-off-by: NJohn Keeping <john@metanate.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
- 12 9月, 2016 2 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Cyrille Pitchen 提交于
This patch fixes the "sf probe" command. The very first SPI flash probe passes, for instance when u-boot tries to read its environment settings from a (Q)SPI memory but next "sf probe" commands fail because the flash memory node is unbound from the SPI controller children nodes. Signed-off-by: NCyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: NWenyou Yang <wenyou.yang@atmel.com> Tested-by: NStefan Roese <sr@denx.de> Tested-by: NHannes Schmelzer <oe5hpm@oevsv.at> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 10 9月, 2016 7 次提交
-
-
由 Heiko Schocher 提交于
move VERSION_VARIABLE from board config file into a Kconfig option. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
-
由 Tom Rini 提交于
We only need the function found in cmd/disk.c when we have IDE, SCSI or USB_STORAGE enabled. While the first two are easy to get right, in the 3rd case we assume that the set of cases where we do have USB and do not enable USB_STORAGE are small enough that we can take the small bloat of un-discarded strings on gcc prior to 6.x Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
In some cases we were missing CONFIG_USB=y so enable that when needed. Reviewed-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Joshua Scott 提交于
A previous patch (net: asix: fix operation without eeprom) added a two-byte shift to the packet buffer when receiving a packet on the AX88772B. This shift was not included when the driver was updated to work with DriverModel. Testing on a Marvell DB-88F6820-ACM showed that the adapter was not functioning correctly (EHCI timeouts). This patch brings the two-byte shift to the DriverModel implementation of ops->recv (asix_eth_recv). Testing on the same board, we were able to TFTP a file over and confirm that the crc32 was correct. Signed-off-by: NJoshua Scott <joshua.scott@alliedtelesis.co.nz> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Joe Hershberger 提交于
This reverts commit 6279b49e. This caused a bad data crc. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> Reported-by: NGuillaume GARDET <guillaume.gardet@free.fr>
-
由 Joe Hershberger 提交于
This reverts commit 998372b4. This caused a data abort on some platform. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> Reported-by: NGuillaume GARDET <guillaume.gardet@free.fr>
-
- 09 9月, 2016 2 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
-
- 08 9月, 2016 1 次提交
-
-
由 Lokesh Vutla 提交于
Update the README to add support for K2G EVM. Also - Add steps on how to use MMC boot - Fix load address when using CCS - Update build target to u-boot.bin from u-boot-dtb.bin as all ks2 platforms uses DT. Reviewed-by: NTom Rini <trini@konsulko.com> Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
- 07 9月, 2016 20 次提交
-
-
由 Mian Yousaf Kaukab 提交于
Provide version of struct efi_mem_desc in efi_get_memory_map(). EFI_BOOT_SERVICES.GetMemoryMap() in UEFI specification v2.6 defines memory descriptor version to 1. Linux kernel also expects descriptor version to be 1 and prints following warning during boot if its not: Unexpected EFI_MEMORY_DESCRIPTOR version 0 Signed-off-by: NMian Yousaf Kaukab <yousaf.kaukab@gmail.com>
-
由 Jonathan Gray 提交于
ENOLINK is not required by POSIX and does not exist on OpenBSD and likely other systems. Signed-off-by: NJonathan Gray <jsg@jsg.id.au>
-
由 Jonathan Gray 提交于
The u-boot endian macros map directly to system endian macros on OpenBSD. Signed-off-by: NJonathan Gray <jsg@jsg.id.au>
-
由 Nishanth Menon 提交于
When beagleboard-X15 is booted, we see the following log: Unidentified board claims BBRDX15_ in eeprom header This is because of the missing check for x15 (the default) and reports an error for a valid board configuration. Fix the same. Signed-off-by: NNishanth Menon <nm@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Nishanth Menon 提交于
Felipe Balbi has move on from TI and the current email ID is no longer valid. So, replacing with Lokesh. While at it, update missing config file which was untracked. Signed-off-by: NNishanth Menon <nm@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Robert P. J. Day 提交于
Line up comments for readibility. Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
-
由 Wenbin Song 提交于
Use environment variable "kernel_addr_r" to indicate the location in RAM where FIT image will be stored. Use label command "kernel" to indicate which <path> the FIT image at. Signed-off-by: NWenbin Song <wenbin.song@nxp.com>
-
由 York Sun 提交于
When FIT image is used, a single image provides kernel, device tree and optionally ramdisk. Argc and argv need to be adjusted to support this. Test cases: 1. Booting with legacy images 2. Booting with legacy images without initrd 3. Booting with FIT image Test commands: 1. pxe get && pxe boot 2. sysboot Signed-off-by: NYork Sun <york.sun@nxp.com> Signed-off-by: NWenbin Song <wenbin.song@nxp.com>
-
由 Robert P. J. Day 提交于
Correct a small number of spelling mistakes. Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
-
由 Vagrant Cascadian 提交于
As bootargs is hard-coded for the default behavior on the omap3_pandora, only set the bootargs if distro_bootcmd fails to load. This leaves distro_bootcmd free to use alternate boot arguments. Signed-off-by: NVagrant Cascadian <vagrant@debian.org>
-
由 Vagrant Cascadian 提交于
Add support for using distro_bootcmd to the omap3_pandora target, falling back to prior behavior. Signed-off-by: NVagrant Cascadian <vagrant@debian.org>
-
由 Masahiro Yamada 提交于
We are supposed to not add config entries with only "default y" in board/SoC Kconfig files. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
-
由 Masahiro Yamada 提交于
If both SPL_DM and SPL_OF_CONTROL are enabled, SPL needs to bind several devices, but CONFIG_SYS_MALLOC_F_LEN=0x400 is apparently not enough. Increase the default to 0x2000 for the case. This will be helpful for shorter defconfigs. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NStefan Roese <sr@denx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
Move this option to Kconfig and set its default value to 4; this increases the number of supported CPUs for some boards. It consumes 1KB memory per CPU for PSCI stack, but it should not be a big deal, given the amount of memory used for the modern OSes. Reviewed-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
Add ARCH_SUPPORT_PSCI as a non-configurable option that platforms can select. Then, move CONFIG_ARMV7_PSCI, which is automatically enabled if both ARMV7_NONSEC and ARCH_SUPPORT_PSCI are enabled. Reviewed-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
If CONFIG_ARMV7_NONSEC is enabled, the linker script requires CONFIG_ARMV7_PSCI_NR_CPUS regardless of CONFIG_ARMV7_PSCI. Reviewed-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
SPL_BUILD is not a CONFIG in Kconfig, so !SPL_BUILD is always true. Reviewed-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Vagrant Cascadian 提交于
CONFIG_CMD_FS_GENERIC is enabled; use it to load the autoboot script, rather than first attempting with fatload and falling back to ext2load. Signed-off-by: NVagrant Cascadian <vagrant@debian.org> Acked-by: NGrazvydas Ignotas <notasas@gmail.com>
-
由 Vagrant Cascadian 提交于
fatload/ext2load both require that the device and partition be specified after specifying the device type. Specify the first partition on mmc device 0, which is the only mmc device currently configured on the pandora. Signed-off-by: NVagrant Cascadian <vagrant@debian.org> Acked-by: NGrazvydas Ignotas <notasas@gmail.com>
-
由 Tom Rini 提交于
On all TI platforms the ROM defines a "downloaded image" area at or near the start of SRAM which is followed by a reserved area. As it is at best bad form and at worst possibly harmful in corner cases to write in this reserved area, we stop doing that by adding in the define NON_SECURE_SRAM_IMG_END to say where the end of the downloaded image area is and make SRAM_SCRATCH_SPACE_ADDR be one kilobyte before this. At current we define the end of scratch space at 0x228 bytes past the start of scratch space this this gives us a lot of room to grow. As these scratch uses are non-optional today, all targets are modified to respect this boundary. Tested on OMAP4 Pandaboard, OMAP3 Beagle xM Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Nagendra T S <nagendra@mistralsolutions.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Enric Balletbo i Serra <eballetbo@gmail.com> Cc: Adam Ford <aford173@gmail.com> Cc: Steve Sakoman <sakoman@gmail.com> Cc: Stefan Roese <sr@denx.de> Cc: Thomas Weber <weber@corscience.de> Cc: Hannes Schmelzer <oe5hpm@oevsv.at> Cc: Thomas Chou <thomas@wytron.com.tw> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Simon Glass <sjg@chromium.org> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Heiko Schocher <hs@denx.de> Cc: Samuel Egli <samuel.egli@siemens.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Cc: Ben Whitten <ben.whitten@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: "B, Ravi" <ravibabu@ti.com> Cc: "Matwey V. Kornilov" <matwey.kornilov@gmail.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Ash Charles <ashcharles@gmail.com> Cc: "Kipisz, Steven" <s-kipisz2@ti.com> Cc: Daniel Allred <d-allred@ti.com> Signed-off-by: NTom Rini <trini@konsulko.com> Tested-by: NLokesh Vutla <lokeshvutla@ti.com> Acked-by: NLokesh Vutla <lokeshvutla@ti.com> Tested-by: NLadislav Michl <ladis@linux-mips.org>
-