- 09 11月, 2013 7 次提交
-
-
由 Bo Shen 提交于
The value of dfu->r_left need decrease along with the transfer Signed-off-by: NBo Shen <voice.shen@atmel.com>
-
由 Mateusz Kulikowski 提交于
submit_common_msg should report amount of data passed from/to device. Instead, it always returned size requested by Host. Signed-off-by: NMateusz Kulikowski <mateusz.kulikowski@gmail.com>
-
由 Przemyslaw Marczak 提交于
This patch allows exiting from UMS mode to u-boot prompt by detaching usb cable or by pressing ctrl+c. Add new config: CONFIG_USB_CABLE_CHECK. If defined then board file should provide function: usb_cable_connected() (include/usb.h) that return 1 if cable is connected and 0 otherwise. Changes v2: - add a note to the README Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com> Cc: Marek Vasut <marex@denx.de>
-
由 Przemyslaw Marczak 提交于
UMS init was implemented in trats board file but mostly it comprises common code. Due to that it has been moved to common/ums.c to avoid code duplication in the future. Changes: - move ums initialization code from trats to common/ums.c - remove unused CONFIG_USB_GADGET_MASS_STORAGE from trats.h Changes v2: - move this patch at the top of code cleanups patches Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Minkyu Kang <mk7.kang@samsung.com>
-
由 Przemyslaw Marczak 提交于
This patch prevents: - ums disk capacity miscalculation because of integer overflow Changes v2: - Prevents passing zero size disk capacity to ums gadget driver - Change function ums_get_capacity() to ums_disk_init() and do ums disk initialization before gadget init - Remove unnecessary code from mass storage driver Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com> Cc: Marek Vasut <marex@denx.de>
-
由 Przemyslaw Marczak 提交于
Before this change ums command only allowed use of mmc 0. Now this argument can be set. Changes: - remove mmc device number checking because it is always positive number - remove printing "no such device" - it is done by find_mmc_device() Change-Id: I767e45151ad515c7bef19e6c13087374f5e23c11 Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com> Cc: Marek Vasut <marex@denx.de>
-
由 Przemyslaw Marczak 提交于
This patch introduces some cleanups to ums code. Changes: ums common: - introduce UMS_START_SECTOR and UMS_NUM_SECTORS as defined in usb_mass_storage.h both default values as 0 if board config doesn't define them common cleanup changes: - change name of struct "ums_board_info" to "ums" - "ums_device" fields are moved to struct ums and "dev_num" is removed - change function name: board_ums_init to ums_init - remove "extern" prefixes from usb_mass_storage.h cmd_usb_mass_storage: - change error() to printf() if need to print info message - change return values to command_ret_t type at ums command code - add command usage string Changes v2: ums common: - always returns number of read/write sectors - coding style clean-up ums gadget: - calculate amount of read/write from device returned value. Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com> Cc: Marek Vasut <marek.vasut@gmail.com>
-
- 07 11月, 2013 2 次提交
-
-
- 06 11月, 2013 7 次提交
-
-
由 jason 提交于
Signed-off-by: NJason Jin <Jason.Jin@freescale.com>
-
The malloc space is to small to boot, the current uboot 2013.10-rcX, This will fix the startup problems by increasing the mallog space to 4MiB. Signed-off-by: NJens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Michal Simek 提交于
Here is the set of command which has been performed to proof this feature. gzip < fpga.bin > fpga.bin.gz mkimage -A arm -O u-boot -T firmware -C gzip \ -a 20000000 -n "zc702_fpga_bin" -d fpga.bin.gz fpga.bin.gz.ub tftp 100000 fpga.bin.gz.ub fpga loadmk 0 100000 This flow should speedup loading bitstream data from external memory and save image footprint in non volatile memory. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Acked-by: NJagannadha Sutradharudu Teki <jaganna@xilinx.com>
-
由 Michal Simek 提交于
DMA doesn't work when src is placed below 1MB limit. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Acked-by: NJagannadha Sutradharudu Teki <jaganna@xilinx.com>
-
Buffers must be cache and dma aligned. Signed-off-by: NJagannadha Sutradharudu Teki <jaganna@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
- 05 11月, 2013 14 次提交
-
-
由 Rob Herring 提交于
pxelinux and syslinux differ in their handling of absolute paths in menu files. A pxelinux path is aways prepended with the bootfile path while syslinux allows for absolute paths. u-boot was always treating a leading / as an absolute path breaking some pxelinux setups. Fix this by adding a flag to distinguish pxelinux vs. syslinux behavior. Reported-by: NIan Campbell <Ian.Campbell@citrix.com> Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
Convert versatile to use the commmon timer code. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
Convert tegra to use the commmon timer code. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
Convert socfpga to use the commmon timer code. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
Convert vexpress to use the commmon timer code. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
Convert mx25 to use the commmon timer code. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
Convert highbank to use the commmon timer code. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
Convert sh to use the commmon timer code. Remove reset_timer and set_timer as they are unused on sh. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
Many platforms duplicate pretty much the same timer code yet they all have a 32-bit freerunning counter register. Create a common implementation that minimally requires 2 or 3 defines to add timer support: CONFIG_SYS_TIMER_RATE - Clock rate of the timer counter CONFIG_SYS_TIMER_COUNTER - Address of 32-bit counter CONFIG_SYS_TIMER_COUNTS_DOWN - Define if counter counts down All functions are weak or ifdef'ed so they can still be overriden by any platform. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
This fixes building time.c when unreferenced functions are added. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
Remove platform CONFIG_SYS_HZ definition for configs a-z*. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
Remove platform CONFIG_SYS_HZ definition for configs A-Z*. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
According to the README, CONFIG_SYS_HZ must be 1000 and most platforms follow that. In preparation to remove CONFIG_SYS_HZ from all these platforms, provide a common definition. The platforms which use a value other than 1000 will get build warning now. These configs are: include/configs/M5271EVB.h:#define CONFIG_SYS_HZ 1000000 include/configs/balloon3.h:#define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */ include/configs/idmr.h:#define CONFIG_SYS_HZ (50000000 / 64) include/configs/mini2440.h:#define CONFIG_SYS_HZ 1562500 include/configs/mx1ads.h:#define CONFIG_SYS_HZ 3686400 include/configs/omap3_zoom2.h:#define CONFIG_SYS_HZ ((V_SCLK) / (2 << CONFIG_SYS_PTV)) include/configs/omap730p2.h:#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) include/configs/palmld.h:#define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */ include/configs/palmtc.h:#define CONFIG_SYS_HZ 3686400 /* Timer @ 3686400 Hz */ include/configs/rsk7203.h:#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER) include/configs/rsk7264.h:#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER) include/configs/rsk7269.h:#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER) include/configs/scb9328.h:#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */ include/configs/versatile.h:#define CONFIG_SYS_HZ (1000000 / 256) include/configs/zipitz2.h:#define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */ Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
由 Rob Herring 提交于
The definitions for CONFIG_SYS_PROMPT are varied with little reason other than to display the board name. Over half the definitions are "==> ", so make this the default. The rest of the boards remain unchanged to avoid breaking any external scripts expecting a certain prompt. Signed-off-by: NRob Herring <rob.herring@calxeda.com> Reviewed-by: NFabio Estevam <fabio.estevam@freescale.com>
-
- 04 11月, 2013 3 次提交
-
-
git://git.denx.de/u-boot-blackfin由 Tom Rini 提交于
Easy to resolve conflict on the GPIO change. Conflicts: arch/blackfin/cpu/Makefile Signed-off-by: NTom Rini <trini@ti.com>
-
由 Steven Miao 提交于
The gpio register mappings are different among blackfin processors. Signed-off-by: NSteven Miao <realmz6@gmail.com> Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
-
由 Masahiro Yamada 提交于
This commit fixes: cpu.c:107: warning: ‘noreturn’ function does return Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
-
- 01 11月, 2013 7 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@ti.com>
-
由 Tom Rini 提交于
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: York Sun <yorksun@freescale.com> Signed-off-by: NTom Rini <trini@ti.com>
-
由 Masahiro Yamada 提交于
We have converted all makefiles needed to build $(LIBS). Until this commit we used to grep switch so that U-Boot style and Kbuild style makefiles coexist. But we do not need any more. Goint forward, use always Kbuild style Makefile when adding a new Makefile Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
This commit also deletes post/rules.mk, which in not necessary any more. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: York Sun <yorksun@freescale.com> Cc: Stefan Roese <sr@denx.de>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Vipin Kumar <vipin.kumar@st.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Tom Rini <trini@ti.com>
-