- 03 4月, 2013 1 次提交
-
-
由 York Sun 提交于
Bash ver 3.x doesn't support the parameter expansion with case substitution. Use tr instead. Signed-off-by: NYork Sun <yorksun@freescale.com> Acked-by: NAllen Martin <amartin@nvidia.com>
-
- 28 3月, 2013 1 次提交
-
-
由 Stephen Warren 提交于
This allows: MAKEALL -s tegra to replace: MAKEALL -s tegra20 -s tegra30 -s tegra114 The following also works: MAKEALL -s tegra -s omap Signed-off-by: NStephen Warren <swarren@nvidia.com>
-
- 12 3月, 2013 1 次提交
-
-
由 Andreas Bießmann 提交于
ps on BSD hosts (like OS X) do not provide the --no-headers switch nor understand the AIX format descriptions. Unfortunately there seems no solution to get the PIDs of children in a platfrom independent manner. Therefore detect the OS and decide upon that which way to go. This patch makes the MAKEALL script cleanly stoppable on bare OS X when using the parallel builds of targets. Additionally this patch removes double call to grep by a single call to sed for GNU style child PID detection. Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 20 2月, 2013 1 次提交
-
-
由 Allen Martin 提交于
Add support for per architecture CROSS_COMPILE toolchain definitions via CROSS_COMPILE_ARCH where "ARCH" is any of the supported u-boot architectures. This allows building every supported u-boot board in a single pass of MAKEALL. Signed-off-by: NAllen Martin <amartin@nvidia.com> Acked-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NStephen Warren <swarren@wwwdotorg.org>
-
- 07 12月, 2012 2 次提交
-
-
由 Joe Hershberger 提交于
--continue will allow you to <ctrl-c> the MAKEALL and pick up where you left off. --rebuild-errors will allow you to rebuild only those boards which had trouble on the last run of MAKEALL, allowing you to quickly test a simple fix on just those boards. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> Acked-by: NSimon Glass <sjg@chromium.org> Tested-by: NSimon Glass <sjg@chromium.org>
-
由 Joe Hershberger 提交于
When building in parallel, make sure that we look up the children based on the the actual process group id instead of just assuming that the MAKEALL pid is the process group id. Also ensure that logs from incomplete builds are deleted in the process. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> Acked-by: NSimon Glass <sjg@chromium.org> Tested-by: NSimon Glass <sjg@chromium.org>
-
- 07 11月, 2012 1 次提交
-
-
由 Stefan Roese 提交于
Signed-off-by: NStefan Roese <sr@denx.de>
-
- 30 10月, 2012 1 次提交
-
-
由 Tom Rini 提交于
When BUILD_NBUILDS is > 1 we run the tidy command. With the addition of DocBook this now includes a -C doc/DocBook and a 'entering/leaving' pair of messages happen. Since we don't want to see what's being cleaned here, we can just invoke make -s like we do when building. Signed-off-by: NTom Rini <trini@ti.com>
-
- 16 10月, 2012 2 次提交
-
-
由 Kim Phillips 提交于
thanks to Tom Rini for the good idea. Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Tom Rini 提交于
After taking with the former maintainer, delete this platform. The patch is from the former maintainer. Signed-off-by: NTom Rini <trini@ti.com>
-
- 26 9月, 2012 1 次提交
-
-
由 Allen Martin 提交于
The LIST_arm rule included the Atmel boards twice (by virtue of including both LIST_at91 and LIST_ARM9) and was missing all the arm720t, arm946es, and arm1176 boards. Change this list to use boards_by_arch() which is less error prone. After this change "./MAKEALL arm" and "./MAKEALL -a arm" build the same boards. Also fix up some missing and duplicate boards to arm, mips, and m68k. Signed-off-by: NAllen Martin <amartin@nvidia.com> Acked-by: NTom Rini <trini@ti.com>
-
- 01 9月, 2012 1 次提交
-
-
由 Allen Martin 提交于
Update MAKEALL to handle the optional SPL CPU field that was added to boards.cfg. This impacts the cases in MAKEALL that have to match against CPU type (field 3). In these cases use ':' as a field separator to split the u-boot CPU from the SPL CPU. Signed-off-by: NAllen Martin <amartin@nvidia.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
- 10 8月, 2012 1 次提交
-
-
由 Andy Fleming 提交于
If we build everything correctly with multiple builds, and an ERR directory had been previously created, we failed to report that everything was fine because grep failed to find anything in the ERR directory. Use grep -r, which doesn't complain if there are no input files. Signed-off-by: NAndy Fleming <afleming@freescale.com> Tested-by: NTom Rini <trini@ti.com>
-
- 22 5月, 2012 2 次提交
-
-
由 Joe Hershberger 提交于
In the summary, indicate which boards errored and which boards merely warned. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> Cc: Andy Fleming <afleming@freescale.com>
-
由 Joe Hershberger 提交于
This was broken by f588bb03Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> Cc: Andy Fleming <afleming@freescale.com>
-
- 18 5月, 2012 2 次提交
-
-
由 Andy Fleming 提交于
The patch that added parallel builds broke MAKEALL -l, so this fixes that. At the same time, it improves the termination so that it shuts down the build threads if you cancel the build. Lastly, it removes a bunch of debug code. Signed-off-by: NAndy Fleming <afleming@freescale.com> Tested-by: NWolfgang Denk <wd@denx.de>
-
由 Andy Fleming 提交于
pdnb3 and scpu are explicitly on LIST_ixp, even though they are also specified in boards.cfg as having cpu ixp. This means that they will be built twice when doing ./MAKEALL ixp, or ./MAKEALL arm. This was pointless before, but actually breaks things if you launch both builds at the same time, as they overwrite each other. Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
- 30 4月, 2012 1 次提交
-
-
由 Andy Fleming 提交于
The MAKEALL script cleverly runs make with the appropriate options to use all of the cores on the system, but your average U-Boot build can't make much use of more than a few cores. If you happen to have a many-core server, your builds will leave most of the system idle. In order to make full use of such a system, we need to build multiple targets in parallel, and this requires directing make output into multiple directories. We add a BUILD_NBUILDS variable, which allows users to specify how many builds to run in parallel. When BUILD_NBUILDS is set greater than 1, we redefine BUILD_DIR for each build to be ${BUILD_DIR}/${target}. Also, we make "./build" the default BUILD_DIR when BUILD_NBUILDS is greater than 1. MAKEALL now tracks which builds are still running, and when one finishes, it starts a new build. Once each build finishes, we run "make tidy" on its directory, to reduce the footprint. As a result, we are left with a build directory with all of the built targets still there for use, which means anyone who wanted to use MAKEALL as part of a test harness can now do so. Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
- 31 3月, 2012 1 次提交
-
-
由 Marek Vasut 提交于
The -m option tries to find the board in MAINTAINERS file and figure out the email. The -M option lists boards including their maintainers emails and all affiliated emails. There are multiple strategies used to retrieve these emails: 1) Check board/<boardname> with git log and use three most recent emails 2) Check board/<boardname> with git log and use three most used emails 3) Try finding board in MAINTAINERS file and retrieve all emails from there The result is then sorted and unique results are retrieved and reported. For -m option, only strategy 3) is used. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de>
-
- 26 3月, 2012 1 次提交
-
-
由 Scott Wood 提交于
This makes it easier to detect changes in the SPL portion, as can currently be done for the main U-Boot image. Signed-off-by: NScott Wood <scottwood@freescale.com> Acked-by: NTom Rini <trini@ti.com>
-
- 14 1月, 2012 1 次提交
-
-
由 Stefan Kristiansson 提交于
Signed-off-by: NStefan Kristiansson <stefan.kristiansson@saunalahti.fi>
-
- 11 12月, 2011 3 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Dave Peverley <dpeverley@mpc-data.co.uk> Acked-by: NTom Rini <trini@ti.com>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Kshitij Gupta <kshitij@ti.com> Acked-by: NTom Rini <trini@ti.com>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
-
- 09 12月, 2011 1 次提交
-
-
由 Daniel Schwierzeck 提交于
Build dbau1550_el only in LIST_au1xx0_el and LIST_mips_el. Also remove obsolete lists for mips5kc. Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@googlemail.com> Cc: Thomas Lange <thomas@corelatus.se>
-
- 07 12月, 2011 1 次提交
-
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de>
-
- 29 11月, 2011 1 次提交
-
-
由 Stefano Babic 提交于
The mx31pdk can boot only from NAND and the target was already updated in boards.cfg. mx31pdk_nand is obsolete and is dropped. Signed-off-by: NStefano Babic <sbabic@denx.de>
-
- 28 11月, 2011 1 次提交
-
-
由 Stefano Babic 提交于
The mx31pdk can boot only from NAND and the target was already updated in boards.cfg. mx31pdk_nand is obsolete and is dropped. Signed-off-by: NStefano Babic <sbabic@denx.de>
-
- 22 10月, 2011 1 次提交
-
-
由 Macpaul Lin 提交于
Add evaluation board "adp-ag101" configuration file adp-ag101.h. Add adp-ag101.c board config and related settings. Add board adp-ag101 into boards.cfg Signed-off-by: NMacpaul Lin <macpaul@andestech.com>
-
- 19 10月, 2011 1 次提交
-
-
由 stany MARCEL 提交于
Signed-off-by: NStany MARCEL <stany.marcel@novasys-ingenierie.com>
-
- 12 10月, 2011 1 次提交
-
-
由 Xiangfu Liu 提交于
Add support for the qi_lb60 (a.k.a QI Ben NanoNote) clamshell device from Qi hardware: http://en.qi-hardware.com/wiki/Ben_NanoNote http://en.qi-hardware.com/wiki/Main_Page http://en.wikipedia.org/wiki/Qi_hardware This Jz4740-based clamshell device does not use NOR flash to boot. The initial bring-up assumes that U-Boot is directly loaded into SDRAM using USB boot tool, and starts from 0x80100000. About USB boot tool ------------------- Jz4740 is one of the XBurst processors with USB boot functionality supported. The CPU can boot from a small ROM in the LSI, initialize CPU and USB module, then wait for USB commands from the USB host. We can send 8 KB binary data to the CPU cache using USB boot tool. USB boot tool is available to the public at Ingenic website. Also there is an alternative Debian package named xburst-tools. Signed-off-by: NXiangfu Liu <xiangfu@openmobilefree.net> Acked-by: NDaniel <zpxu@ingenic.cn> Signed-off-by: NShinya Kuribayashi <skuribay@pobox.com>
-
- 06 10月, 2011 1 次提交
-
-
由 Mike Frysinger 提交于
The m68k tree is the only one where `./MAKEALL <arch>` does not work. So rename the existing coldfire list in the MAKEALL script to m68k, and add an alias from coldfire to m68k. This makes scripting around MAKEALL easier. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 10 9月, 2011 2 次提交
-
-
由 Wolfgang Denk 提交于
Pick them up automatically using $(boards_by_arch ...) Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
-
- 08 9月, 2011 6 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Thomas Elste <info@elste.org>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Marius Gröger <mag@sysgo.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Curt Brune <curt@cucy.com>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Marius Gröger <mag@sysgo.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
-