- 14 12月, 2009 7 次提交
-
-
由 John Ogness 提交于
fec_init() will only allocate fec->base_ptr if it is non-NULL. But the cleanup routine on error will free the pointer without setting it to NULL. This means that a later call to fec_init() would result in using an invalid pointer. Signed-off-by: NJohn Ogness <john.ogness@linutronix.de> Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
-
由 Reinhard Arlt 提交于
This chip is equipped for example on the esd PMC-ETH2-GB board. So let's add it to the list of supported chips to the e1000 driver. Signed-off-by: NReinhard Arlt <reinhard.arlt@esd.eu> Signed-off-by: NStefan Roese <sr@denx.de> Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
-
由 Remy Bohmer 提交于
Signed-off-by: NRemy Bohmer <linux@bohmer.net> Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
-
由 Nishanth Menon 提交于
This modification is NOT tested on any of the platforms modified as I dont have them. please help by testing+building+fixing Signed-off-by: NNishanth Menon <nm@ti.com> Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
-
由 Nishanth Menon 提交于
Enable the NET MULTI option and remove build warning Tested: SDP3430 Signed-off-by: NNishanth Menon <nm@ti.com> Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
-
由 Nishanth Menon 提交于
Make the lan91c96 driver capable of CONFIG_NET_MULTI to be clean for the new arch, add a a lil detect function Most of the formatting change was done to keep checkpatch silent, but a few functions and #if 0ed code which does not make sense for NET_MULTI have been removed Now, use the lan91c96_initialize() function to init the driver Signed-off-by: NNishanth Menon <nm@ti.com> Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
-
- 09 12月, 2009 2 次提交
-
-
由 Heiko Schocher 提交于
There is more and more usage of printing 64bit values, so enable this feature generally, and delete the CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL defines. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
u-boot updates, before starting Linux, the memory node in the DTS. As this is a "standard" feature, move this functionality to the cpu.c file for mpc5xxx and mpc512x processors. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
- 08 12月, 2009 19 次提交
-
-
由 Wolfgang Denk 提交于
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Peter Tyser 提交于
Previously MAKEALL would always return a value of 0, even if 1 or more boards did not compile. This change causes MAKEALL to return 0 if all boards were able to build, otherwise 1. This change also requires changing the script interpreter from sh to bash to support bash's PIPESTATUS variable. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
由 Peter Tyser 提交于
Recent commits 1a99de2c and 6a590c5f both fixed the same bug in the same manner. Unfortunately git was "smart" enough to merge both changes which resulted in some duplicate code. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com> Reordered code and comment a bit. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Heiko Schocher 提交于
commit bd3784df deleted some unused code in do_i2c_mw(), but missed to also remove the respective commment. This patch fixes this. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
add the following commands for the manroland boards: CONFIG_CMDLINE_EDITING CONFIG_COMMAND_HISTORY CONFIG_AUTO_COMPLETE Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Wolfgang Denk 提交于
Conflicts: lib_generic/zlib.c Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Stefan Roese 提交于
This patch introduces a weak default function for post_hotkey_pressed(), returning 0, for boards without hotkey support. The long-running tests won't be started on those boards. This default function was implemented in many board directories. By implementing this weak default we can remove all those duplicate versions. Boards with hotkey support, can override this weak default function by defining one in their board specific code. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Heiko Schocher 提交于
To update the real memory size in the memory node on the uc101 and mucmc52 boards call fdt_fixup_memory() in ft_board_setup(). Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Daniel Hobi 提交于
Depending on offset, flash size and the number of bad blocks, get_len_incl_bad may return a too small value which may lead to: 1) If there are no bad blocks, nand_{read,write}_skip_bad chooses the bad block aware read/write code. This may hurt performance, but does not have any adverse effects. 2) If there are bad blocks, the nand_{read,write}_skip_bad may choose the bad block unaware read/write code (if len_incl_bad == *length) which leads to corrupted data. Signed-off-by: NDaniel Hobi <daniel.hobi@schmid-telecom.ch>
-
由 Evan Samanas 提交于
- NfsTimeout() does not correctly update the NFS timeout value which results in NfsTimeout() only being called once in certain situations. This can result in the 'nfs' command hanging indefinetly. For example, the command: nfs 192.168.0.1:/home/user/file will not exit until ctrl-c is pressed if 192.168.0.1 does not have an NFS server running. This issue is resolved by reinitializting the NFS timeout value inside NfsTimeout() when a timeout occurs. - Make the 'nfs' command print the 'T' character when a timeout occurs. Previously there was no indication that timeouts were occuring. - Mimic the 'tftpboot' command and when a download fails print "Retry count exceeded; starting again", and restart the download taking the 'netretry' environment variable into account. Signed-off-by: NEvan Samanas <esamanas@xes-inc.com> Signed-off-by: NPeter Tyser <ptyser@xes-inc.com> Tested on TQM8xxL. Tested by: Wolfgang Denk <wd@denx.de> Tested on MPC8527DS. Tested by: Ed Swarthout <Ed.Swarthout@freescale.com>
-
由 Peter Tyser 提交于
The help message for the 'bootm' command listed the 'cmdline' and 'bdt' sub-commands in the wrong order which resulted in the error below when following the 'help' command's instructions: "Trying to execute a command out of order" Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
由 Robert P. J. Day 提交于
"nandecc" help output should not reproduce the command name, nor have a trailing newline. Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
-
由 Mike Rapoport 提交于
Since commit 736fead8 "Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API" SMC911X configration options are called CONFIG_SMC911X rather than CONFIG_DRIVER_SMC911X. Update README to reflect that change. Signed-off-by: NMike Rapoport <mike@compulab.co.il>
-
由 Mike Rapoport 提交于
Signed-off-by: NMike Rapoport <mike@compulab.co.il>
-
由 Ed Swarthout 提交于
An off by one error may cause nfs readlink lookup fail if nfs_path_buff has non-zero data from a previous use. Loading: *** ERROR: File lookup fail Signed-off-by: NEd Swarthout <Ed.Swarthout@freescale.com>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Commit dce3d797 updated the zlib code to v0.95; this caused conflicts when building for the "cradle" board, because the (pretty generic) preprocessor variable "OFF" was used in multiple files. Make sure to avoid further conflicts by #undef'ing it in zlib.c before redefining it. Signed-off-by: NWolfgang Denk <wd@denx.de> cc: Giuseppe Condorelli <giuseppe.condorelli@st.com> cc: Angelo Castello <angelo.castello@st.com> cc: Alessandro Rubini <rubini-list@gnudd.com>
-
- 06 12月, 2009 1 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 05 12月, 2009 11 次提交
-
-
由 Wolfgang Denk 提交于
Conflicts: board/esd/plu405/plu405.c drivers/rtc/ftrtc010.c Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Mike Frysinger 提交于
The Linux kernel build system changed how it compresses things with LZMA such that the header no longer contains the filesize (it is instead set to all F's). So if we get a LZMA image that has -1 for the 64bit field, let's just assume that the decompressed size is unknown and continue on. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Detlev Zundel 提交于
Two later additions to the Configuration Option section unfortunately split the description of Show boot progress and the list of its call outs. Signed-off-by: NDetlev Zundel <dzu@denx.de>
-
由 Joakim Tjernlund 提交于
This patch optimizes the direct copy procedure. Uses get_unaligned() but only in one place. The copy loop just above this one can also use this optimization, but I havn't done so as I have not tested if it is a win there too. On my MPC8321 this is about 17% faster on my JFFS2 root FS than the original. No speed test has been performed in u-boot. Size increase on ppc: 484 bytes Signed-off-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se> Acked-by: NPeter Korsgaard <jacmet@sunsite.dk>
-
由 Peter Korsgaard 提交于
Add lzop decompression support to the existing lzo bitstream handling (think gzip versus zlib), and support it for uImage decompression if CONFIG_LZO is enabled. Lzop doesn't compress as good as gzip (~10% worse), but decompression is very fast (~0.7s faster here on a slow ppc). The lzop decompression code is based on Albin Tonnerre's recent ARM Linux lzo support patch. Cc: albin.tonnerre@free-electrons.com Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk>
-
由 Peter Tyser 提交于
Previously, there was no indication to the user that a FIT image was successfully created after executing mkimage. For example: $ mkimage -f uImage.its uImage.itb DTC: dts->dtb on file "uImage.its" Adding some additional output after creating a FIT image lets the user know exactly what is contained in their image, eg: $ mkimage -f uImage.its uImage.itb DTC: dts->dtb on file "uImage.its" FIT description: Linux kernel 2.6.32-rc7-00201-g7550d6f-dirty Created: Tue Nov 24 15:43:01 2009 Image 0 (kernel@1) Description: Linux Kernel 2.6.32-rc7-00201-g7550d6f-dirty Type: Kernel Image Compression: gzip compressed Data Size: 2707311 Bytes = 2643.86 kB = 2.58 MB Architecture: PowerPC OS: Linux Load Address: 0x00000000 Entry Point: 0x00000000 Hash algo: crc32 Hash value: efe0798b Hash algo: sha1 Hash value: ecafba8c95684f2c8fec67e33c41ec88df1534d7 Image 1 (fdt@1) Description: Flattened Device Tree blob Type: Flat Device Tree Compression: uncompressed Data Size: 12288 Bytes = 12.00 kB = 0.01 MB Architecture: PowerPC Hash algo: crc32 Hash value: a5cab676 Hash algo: sha1 Hash value: 168722b13e305283cfd6603dfe8248cc329adea6 Default Configuration: 'config@1' Configuration 0 (config@1) Description: Default Linux kernel Kernel: kernel@1 FDT: fdt@1 This brings the behavior of creating a FIT image in line with creating a standard uImage, which also prints out the uImage contents after creation. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
由 Peter Tyser 提交于
The FIT fit_set_header() function was copied from the standard uImage's image_set_header() function during mkimage reorganization. However, the fit_set_header() function is not used since FIT images use a standard device tree blob header. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
由 Peter Tyser 提交于
When building a Flattened Image Tree (FIT) the image type needs to be "flat_dt". Commit 89a4d6b1 introduced a regression which caused the user to need to specify the "-T flat_dt" parameter on the command line when building a FIT image. The "-T flat_dt" parameter should not be needed and is at odds with the current FIT image documentation. Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
由 Ingo van Lil 提交于
According to the PPC reference implementation the udelay() function is responsible for resetting the watchdog timer as frequently as needed. Most other architectures do not meet that requirement, so long-running operations might result in a watchdog reset. This patch adds a generic udelay() function which takes care of resetting the watchdog before calling an architecture-specific __udelay(). Signed-off-by: NIngo van Lil <inguin@gmx.de>
-
由 Graeme Russ 提交于
Signed-off-by: NGraeme Russ <graeme.russ@gmail.com>
-
由 Graeme Russ 提交于
Signed-off-by: NGraeme Russ <graeme.russ@gmail.com>
-