- 19 7月, 2017 22 次提交
-
-
由 xypron.glpk@gmx.de 提交于
efi_set_timer is refactored to make the function callable internally. Wrapper function efi_set_timer_ext is provided for EFI applications. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 xypron.glpk@gmx.de 提交于
efi_create_event is refactored to make it possible to call it internally. For EFI applications wrapper function efi_create_event_ext is created. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 xypron.glpk@gmx.de 提交于
The UEFI standard defines the type for the tpl level as EFI_TPL alias UINTN. UINTN is an integer is defined as an unsigned integer of native width. So we can use size_t for the definition. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 xypron.glpk@gmx.de 提交于
Up to now the boot time supported only a single event. This patch now allows four events. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 xypron.glpk@gmx.de 提交于
In our implementation the internal structure of events is known. So use the known type instead of void. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 xypron.glpk@gmx.de 提交于
If efi_free_pool is called with argument NULL an illegal memory access occurs. So let's check the parameter on entry. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 xypron.glpk@gmx.de 提交于
The efi_loader currently stops iterating over the available block devices stopping at the first device that fails. This may imply that no block device is found. With the patch efi_loader only iterates over valid devices. It is based on patch 06d592bf52f6 (dm: core: Add uclass_first/next_device_check()) which is currently in u-boot-dm.git. For testing I used an odroid-c2 with a dts including &sd_emmc_a { status = "okay"; }; This device does not exist on the board and cannot be initialized. Without the patch: => bootefi hello ## Starting EFI application at 01000000 ... WARNING: Invalid device tree, expect boot to fail mmc_init: -95, time 1806 Found 0 disks Hello, world! ## Application terminated, r = 0 With the patch: => bootefi hello ## Starting EFI application at 01000000 ... WARNING: Invalid device tree, expect boot to fail mmc_init: -95, time 1806 Scanning disk mmc@70000.blk... Scanning disk mmc@72000.blk... Card did not respond to voltage select! mmc_init: -95, time 9 Scanning disk mmc@74000.blk... Found 3 disks Hello, world! ## Application terminated, r = 0 Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 xypron.glpk@gmx.de 提交于
Currenty any EFI status other than EFI_SUCCESS is reported as Application terminated, r = -22 With the patch the status code returned by the EFI application is printed. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 xypron.glpk@gmx.de 提交于
efi.h held only a few EFI status codes. The patch adds the missing definitions for later usage. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 xypron.glpk@gmx.de 提交于
The Unified Extensible Firmware Interface Specification, version 2.7, defines in chapter 2.1.2 - UEFI Application that an EFI application may either directly return or call EFI_BOOT_SERVICES.Exit(). Unfortunately U-Boot makes the incorrect assumption that EFI_BOOT_SERVICES.Exit() is always called. So the following application leads to a memory exception on the aarch64 architecture when returning: EFI_STATUS efi_main( EFI_HANDLE handle, EFI_SYSTEM_TABlE systable) { return EFI_SUCCESS; } With this patch the entry point is stored in the image handle. The new wrapper function do_enter is used to call the EFI entry point. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 xypron.glpk@gmx.de 提交于
ConvertPathToText is implemented for * type 4 - media device path * subtype 4 - file path This is the kind of device path we hand out for block devices. All other cases may be implemented later. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> [agraf: fix whitespace] Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 xypron.glpk@gmx.de 提交于
The UEFI specification requires that LocateProtol finds the first handle supporting the protocol and to return a pointer to its interface. So we have to assign the protocols to an efi_object and not use any separate storage. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 xypron.glpk@gmx.de 提交于
Four protocols per object is too few to run iPXE. Let's raise the number of protocols per object to eight. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 xypron.glpk@gmx.de 提交于
UEFI boot service LocateHandleBuffer is implemented by calling efi_allocate_handle and efi_locate_handle. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 xypron.glpk@gmx.de 提交于
To implement LocateHandleBuffer we need to call efi_locate_handle internally without running through EFI_EXIT. So put EFI_ENTRY and EFI_EXIT into a new wrapper function efi_locate_handle_ext. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 xypron.glpk@gmx.de 提交于
Implement InstallMultipleProtocolInterfaces in function efi_install_multiple_protocol_interfaces by repeatedly calling efi_install_protocol_interface. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 xypron.glpk@gmx.de 提交于
For the implementation of UninstallMultipleProtocolInterfaces we need to call efi_uninstall_protocol_interface. In internal calls we should not pass through EFI_EXIT. The patch introduces a wrapper function efi_uninstall_protocol_interface_ext. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 xypron.glpk@gmx.de 提交于
For the implementation of InstallMultipleProtocolInterfaces we need to call efi_install_protocol_interface. In internal calls we should not pass through EFI_EXIT. The patch introduces a wrapper function efi_install_protocol_interface_ext. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 xypron.glpk@gmx.de 提交于
Without the patch efi_uninstall_protocol_interface always returns an error. With the patch protocols without interface can be uninstalled. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 xypron.glpk@gmx.de 提交于
efi_install_protocol_interface up to now only returned an error code. The patch implements the UEFI specification for InstallProtocolInterface with the exception that it will not create new handles. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 xypron.glpk@gmx.de 提交于
Add all parameter checks for function efi_open_protocol that do not depend on a locking table. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 xypron.glpk@gmx.de 提交于
efi_open_protocol was implemented to call a protocol specific open function to retrieve the protocol interface. The UEFI specification does not know of such a function. It is not possible to implement InstallProtocolInterface with the current design. With the patch the protocol interface itself is stored in the list of installed protocols of an efi_object instead of an open function. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> [agraf: fix efi gop support] Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 12 7月, 2017 18 次提交
-
-
-
-
由 Masahiro Yamada 提交于
DTB is encoded in big endian. When we retrieve property values, we need to use fdt32_to_cpu (aka be32_to_cpu) for endian conversion. This is a bit error-prone, but sparse is useful to detect endian mismatch. We need to use (fdt32_t *) instead of (u32 *) for a pointer of a property value. Otherwise sparse warns "cast to restricted __be32". Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
Include <dm/util.h> to fix sparse warnings: symbol 'dm_dump_all' was not declared. Should it be static? symbol 'dm_dump_uclass' was not declared. Should it be static? Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
Reuse ofnode_get_property() to simplify the implementation. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
This function returns the pointer to the value of a node property. The current name ofnode_read_prop() is confusing. Follow the naming of_get_property() from Linux. The return type (const u32 *) is wrong. DT property values can be strings as well as integers. This is why of_get_property/fdt_getprop returns an opaque pointer. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
The code inside the if-block is the same as of_get_property(). Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
This will clarify the code. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
Fix sparse warnings "... was not declared. Should it be static?" Also, fix redefinition of dm_warn/dm_dbg. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Tom Rini 提交于
While the previous pass through fixed one place where we knew that fdt_getprop would be given a positive len, in the case of 'fdt set' we do not, so check that we did no get NULL from fdt_getprop(). Cc: Simon Glass <sjg@chromium.org> Reported-by: Coverity (CID: 163249) Fixes 72c98ed1 ("fdt: Add a check to do_fdt() for coverity") Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Many tegra boards have the console UART node disabled. With livetree this prevents serial from working since it does not 'force' the console to be bound. Updates the affected boards to fix this error. The boards were checked with: for b in $(grep tegra boards.cfg |grep -v integrator | \ awk '{print $7}' | sort); do echo $b; fdtgrep -c nvidia,tegra20-uart b/$b/u-boot.dtb |grep okay; done Signed-off-by: NSimon Glass <sjg@chromium.org> Tested-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1
-
由 Simon Glass 提交于
This error condition should have a debug() message. Add it. Signed-off-by: NSimon Glass <sjg@chromium.org> Tested-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1
-
由 Simon Glass 提交于
Add support for a live device tree to the core serial uclass. Signed-off-by: NSimon Glass <sjg@chromium.org> Tested-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1
-
由 Simon Glass 提交于
This function is quite long. Move the core code into a separate function in preparation for adding livetree support. Signed-off-by: NSimon Glass <sjg@chromium.org> Tested-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1
-
由 Simon Glass 提交于
Update this driver to support a live device tree. Signed-off-by: NSimon Glass <sjg@chromium.org> Tested-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1
-
由 Simon Glass 提交于
Update these two files so include files in the right order. Signed-off-by: NSimon Glass <sjg@chromium.org> Tested-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1
-
由 Simon Glass 提交于
Add some debugging to show when the backlight is enabled. Signed-off-by: NSimon Glass <sjg@chromium.org> Acked-by: NAnatolij Gustschin <agust@denx.de> Tested-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1
-
由 Simon Glass 提交于
Update this driver to support a live device tree. Signed-off-by: NSimon Glass <sjg@chromium.org> Acked-by: NAnatolij Gustschin <agust@denx.de> Tested-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1
-