- 11 7月, 2018 13 次提交
-
-
由 Baruch Siach 提交于
Commit e19b0fb4 (kbuild: generate u-boot.cfg as a byproduct of include/autoconf.mk) removed the use of the cpp_cfg macro in Makefile, but forgot to remove its definition. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NBaruch Siach <baruch@tkos.co.il> Reviewed-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Adam Ford 提交于
Newer kernels have moved from ttyO0 to ttyS0, and when booting it drops a notice: WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' This ensures that you still see kernel messages. Please update your kernel commandline. This patch updates the console to use ttyS0 and eliminate the chatter. Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Heinrich Schuchardt 提交于
Typically init_scsi() does not output anything. So initr_scsi() should provide a \n or we may see borked output like SCSI: Net: No ethernet found. as observed with sandbox_defconfig. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Adam Ford 提交于
The omap_gpio driver has a TODO that says when every board is converted to DM and DT, the omap_gpio_bind can stop using calloc and switch to auto-alloc. This patch converts this driver to auto-calloc when DT is enabled. Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Teddy Reed 提交于
The hashed-strings signature property includes two uint32_t values. The first is unneeded as there should never be a start offset into the strings region. The second, the size, is needed because the added signature node appends to this region. See tools/image-host.c, where a static 0 value is used for the offset. Signed-off-by: NTeddy Reed <teddy.reed@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Teddy Reed 提交于
This adds a new config value FIT_SIGNATURE_MAX_SIZE, which controls the max size of a FIT header's totalsize field. The field is checked before signature checks are applied to protect from reading past the intended FIT regions. This field is not part of the vboot signature so it should be sanity checked. If the field is corrupted then the structure or string region reads may have unintended behavior, such as reading from device memory. A default value of 256MB is set and intended to support most max storage sizes. Suggested-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NTeddy Reed <teddy.reed@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Thomas Fitzsimmons 提交于
Add support for loading U-Boot on the Broadcom 7445 SoC. This port assumes Broadcom's BOLT bootloader is acting as the second stage bootloader, and U-Boot is acting as the third stage bootloader, loaded as an ELF program by BOLT. Signed-off-by: NThomas Fitzsimmons <fitzsim@fitzsim.org> Cc: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Florian Fainelli <f.fainelli@gmail.com>
-
由 Ben Whitten 提交于
Verification of hashes needs to take place before any image post processing, thus matching full FIT image processing. This allows mechanisms such as encryption be applied to images prior to fit generation at the spl level. Signed-off-by: NBen Whitten <ben.whitten@lairdtech.com>
-
由 Alex Kiernan 提交于
Remove empty #ifdef/#ifndef..#endif blocks where the configuration they guarded has been completely removed. Signed-off-by: NAlex Kiernan <alex.kiernan@gmail.com>
-
由 Marek Vasut 提交于
Move the FPGA loading from IS_ENABLED(CONFIG_SPL_OS_BOOT) && IS_ENABLED(CONFIG_SPL_GZIP) conditional. The FPGA loading can be used without OS loading and GZIP support in SPL. This issue was most likely induced by some merge conflict, so fix it. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com>
-
由 Marek Vasut 提交于
Handle the case where the full fitImage support is enabled. In this case, the whole fitImage must be loaded up front as some parts of the fitImage code require memory-mapped access to the entire fitImage. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Simon Glass <sjg@chromium.org>
-
由 Marek Vasut 提交于
Handle the case where the full fitImage support is enabled. In this case, the whole fitImage must be loaded up front as some parts of the fitImage code require memory-mapped access to the entire fitImage. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Simon Glass <sjg@chromium.org>
-
由 Marek Vasut 提交于
Rather than verifying configuration signature of the configuration node containing the kernel image types, verify all configuration nodes, even those that do not contain kernel images. This is useful when the nodes contain ie. standalone OSes or U-Boot. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 10 7月, 2018 16 次提交
-
-
-
由 Ley Foon Tan 提交于
Add code to reset all reset signals as in Ethernet DT node. A reset property is an optional feature, so only print out a warning and do not fail if a reset property is not present. If a reset property is discovered, then use it to deassert, thus bringing the IP out of reset. Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
由 Ley Foon Tan 提交于
Add code to reset all reset signals as in serial DT node. A reset property is an optional feature, so do not fail if a reset property is not present. If a reset property is discovered, then use it to deassert, thus bringing the IP out of reset. Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com> Reviewed-by: NMarek Vasut <marex@denx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Ley Foon Tan 提交于
Add code to reset all reset signals as in mmc DT node. A reset property is an optional feature, so only print out a warning and do not fail if a reset property is not present. If a reset property is discovered, then use it to deassert, thus bringing the IP out of reset. Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Ley Foon Tan 提交于
Change to use CONFIG_IS_ENABLED(DM_RESET), so this can work in SPL build (CONFIG_SPL_DM_RESET) and U-boot build (CONFIG_DM_RESET). Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Ley Foon Tan 提交于
Rename CONFIG_SPL_RESET_SUPPORT to CONFIG_SPL_DM_RESET, so can use CONFIG_IS_ENABLED(DM_RESET) checking in reset.h later. Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Manivannan Sadhasivam 提交于
Add myself as the Maintainer for Actions Semi OWL family and its relevant board, drivers. Signed-off-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-
由 Manivannan Sadhasivam 提交于
This commit adds Actions Semi OWL family UART support. This driver relies on baudrate configured by primary bootloaders. Signed-off-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Manivannan Sadhasivam 提交于
This commit enables UART5 found in S900 SoC for serial console support. Signed-off-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-
由 Manivannan Sadhasivam 提交于
This commit adds UART node for Actions Semi S900 SoC. Signed-off-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-
由 Manivannan Sadhasivam 提交于
This commit adds Actions Semi OWL family base clock and S900 SoC specific clock support. For S900 peripheral clock support, only UART clock has been added for now. Signed-off-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Manivannan Sadhasivam 提交于
This commit adds Clock Management Unit (CMU) nodes for Actions Semi S900 SoC. Signed-off-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-
由 Manivannan Sadhasivam 提交于
This commit adds Actions Semi S900 CMU register definitions to clock bindings. Signed-off-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Manivannan Sadhasivam 提交于
This commit adds uCRobotics Bubblegum-96 board support. This board is one of the 96Boards Consumer Edition platform based on Actions Semi S900 SoC. Features: - Actions Semi S900 SoC (4xCortex A53, Power VR G6230 GPU) - 2GiB RAM - 8GiB eMMC, uSD slot - WiFi, Bluetooth and GPS module - 2x Host, 1x Device USB port - HDMI - 20-pin low speed and 40-pin high speed expanders, 6 LED, 3 buttons U-Boot will be loaded by ATF at EL2 execution level. Relevant driver support will be added in further commits. Signed-off-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-
由 Manivannan Sadhasivam 提交于
This commit adds Actions Semi OWL SoC family support with S900 as the first target SoC. Signed-off-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 09 7月, 2018 11 次提交
-
-
由 Simon Glass 提交于
It is useful to write the position and size of each entry back to the device tree so that U-Boot can access this at runtime. Add a feature to support this, along with associated tests. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Once binman has packed the image, the position and size of each entry is known. It is then possible for binman to update the device tree with these positions. Since placeholder values have been added, this does not affect the size of the device tree and therefore the packing does not need to be performed again. Add a new SetCalculatedProperties method to handle this. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Some entry types modify the device tree, e.g. to remove microcode or add a property. So far this just modifies their local copy and does not affect a 'shared' device tree. Rather than doing this modification in the ObtainContents() method, and a new ProcessFdt() method which is specifically designed to modify this shared device tree. Move the existing device-tree code over to use this method, reducing ObtainContents() to the goal of just obtaining the contents without any processing, even for device tree. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present one of the stages is badly numbered and not described. Fix this. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Add a few simple functions to add a placeholder integer property, and set its value. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
At present some warnings are printed to indicate failures which are a known part of running the tests. Suppress these. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Now that we have 100% code coverage we can enable these tests in the test script also. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Add more tests to increase dtoc code coverage to 100%. Correct a whitespace error in some test .dts files at the same time. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This function is useful in various tests. Move it into the common test utility module. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Add a -T option to run a code-coverage test on dtoc. At present this is about 96%. Future work will increase it to 100%. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Fix some comments and a printf string which is incorrect. Signed-off-by: NSimon Glass <sjg@chromium.org>
-