- 31 7月, 2012 1 次提交
-
-
由 Stephan Linz 提交于
Depending on XILINX_SPI_FLASH_BASEADDR enable SPI flash and environment in SPI flash. Expected values from xparameters.h are: - XILINX_SPI_FLASH_BASEADDR - XILINX_SPI_FLASH_MAX_FREQ - XILINX_SPI_FLASH_CS Signed-off-by: NStephan Linz <linz@li-pro.net> Acked-by: NMichal Simek <monstr@monstr.eu>
-
- 10 7月, 2012 2 次提交
-
-
由 Michal Simek 提交于
Clear and prepare for device-tree driven configuration. Remove CONFIG_SYS_INTC_0 definition Use dynamic allocation instead of static. Signed-off-by: NMichal Simek <monstr@monstr.eu> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Stephan Linz 提交于
- enable OF control and embedded OF - set default device tree file name to 'microblaze' - add CPP to dtc proxy: board/xilinx/dts/microblaze.dts - add an empty but processable dts for microblaze-generic Signed-off-by: NStephan Linz <linz@li-pro.net>
-
- 09 7月, 2012 2 次提交
-
-
由 Stephan Linz 提交于
In the case of missing flash usage disaple (undef) all the UBI support in the same way as for JFFS2. Signed-off-by: NStephan Linz <linz@li-pro.net>
-
由 Stephan Linz 提交于
- fix CONFIG_SYS_MALLOC_BASE from 0x11FB_F000 to 0x13EF_F000 - add new size calculation for CONFIG_SYS_MONITOR_LEN and CONFIG_SYS_MALLOC_LEN derived from SIZE - change CONFIG_SYS_MONITOR_BASE and CONFIG_SYS_MALLOC_BASE calculation to a symbolic equation with the corresponding _LEN definitions - add a "CFI flash memory layout - Example" comment Signed-off-by: NStephan Linz <linz@li-pro.net>
-
- 27 6月, 2012 3 次提交
-
-
由 Stephan Linz 提交于
Increase malloc area for UBI to >= 512k -- foreseeing of UBIFS set to 768k. To save memory in flash (CONFIG_SYS_MONITOR_LEN) the UBIFS is disabled by default. Signed-off-by: NStephan Linz <linz@li-pro.net> Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Stephan Linz 提交于
Use XILINX_FLASH_START to set/unset FLASH and RAMENV. Error: board.c: In function 'board_init': board.c:134: error: 'XILINX_FLASH_START' undeclared (first use in this function) board.c:134: error: (Each undeclared identifier is reported only once board.c:134: error: for each function it appears in.) Signed-off-by: NStephan Linz <linz@li-pro.net> Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Stephan Linz 提交于
CONFIG_SYS_FLASH_PROTECTION is defined twice. The second one is outside the flash configuration context and we can remove it safely. Signed-off-by: NStephan Linz <linz@li-pro.net> Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
- 21 6月, 2012 1 次提交
-
-
由 Tom Rini 提交于
Exactly one board has defined CONFIG_SYS_PROMPT_HUSH_PS2 to a value different than "> " which is vision2. I have Cc'd the maintainer here as I strongly suspect this is a bug rather than intentional behavior. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: NTom Rini <trini@ti.com> Acked-by: NStefano Babic <sbabic@denx.de>
-
- 04 4月, 2012 1 次提交
-
-
由 Stephan Linz 提交于
U-Boot's multipple network supports enables to use several ethernet drivers but microblaze-generic platform config file select only one driver. Reported-by: NMichal Simek <monstr@monstr.eu> Signed-off-by: NStephan Linz <linz@li-pro.net>
-
- 27 3月, 2012 1 次提交
-
-
由 Stephan Linz 提交于
Enable phylib and mii support for AXI EMAC ethernet drivers on Microblaze systems. Signed-off-by: NStephan Linz <linz@li-pro.net> Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
- 23 2月, 2012 1 次提交
-
-
由 Stephan Linz 提交于
Signed-off-by: NStephan Linz <linz@li-pro.net>
-
- 27 11月, 2011 1 次提交
-
-
由 Stephan Linz 提交于
As a result of the commit 68332608 the uart16550 driver is broken for Microblaze big endian systems, because of the missing 3 byte offset. Other than as described, not all U-Boot BSP will treat properly the 3 byte offset. This why prefer to mask out the 3 byte offset in general and setup correct _REG_SIZE value depending on edianess. Signed-off-by: NStephan Linz <linz@li-pro.net> Tested-by: NMichal Simek <monstr@monstr.eu>
-
- 24 10月, 2011 1 次提交
-
-
由 Michal Simek 提交于
Initialize axi_ethernet driver. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
- 06 10月, 2011 1 次提交
-
-
由 Mike Frysinger 提交于
Now that none of the core checks CONFIG_NET_MULTI, there's not much point in boards defining it. So scrub all references to it. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 03 10月, 2011 3 次提交
-
-
由 Michal Simek 提交于
Enable FDT and FIT support. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
U-Boot BSP handle 0x3 offset for big endian systems. Little endian Microblaze systems don't use any offset. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Undefined network functionality for systems without ethernet and disable NFS support. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
- 10 1月, 2011 1 次提交
-
-
由 Michal Simek 提交于
Patch "Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value" (sha1: 25ddd1fb) introduce GENERATED_GBL_DATA_SIZE which is sizeof aligned gd_t (currently 0x40). Microblaze configs used 0x40(128) because this place also contained board info structure which lies on the top of ram. U-Boot is placed to the top of the ram (for example 0xd7ffffff) and bd structure was moved out of ram. This patch is fixing this scheme with GENERATED_BD_INFO_SIZE which swap global data and board info structures. For example: Current: gd 0xd7ffffc0, bd 0xd8000000 Fixed: gd 0xd7ffffc0, bd 0xd7ffff90 Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
- 27 10月, 2010 1 次提交
-
-
由 Wolfgang Denk 提交于
CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not being able to use "sizeof(struct global_data)" in assembler files. Recent experience has shown that manual synchronization is not reliable enough. This patch renames CONFIG_SYS_GBL_DATA_SIZE into GENERATED_GBL_DATA_SIZE which gets automatically generated by the asm-offsets tool. In the result, all definitions of this value can be deleted from the board config files. We have to make sure that all files that reference such data include the new <asm-offsets.h> file. No other changes have been done yet, but it is obvious that similar changes / simplifications can be done for other, related macro definitions as well. Signed-off-by: NWolfgang Denk <wd@denx.de> Acked-by: NKumar Gala <galak@kernel.crashing.org>
-
- 19 10月, 2010 1 次提交
-
-
由 Wolfgang Denk 提交于
The change is currently needed to be able to remove the board configuration scripting from the top level Makefile and replace it by a simple, table driven script. Moving this configuration setting into the "CONFIG_*" name space is also desirable because it is needed if we ever should move forward to a Kconfig driven configuration system. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 12 10月, 2010 4 次提交
-
-
由 Michal Simek 提交于
Microblaze hasn't supported NET_MULTI support. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
1. Fix preprocessor statements 2. Clean coding style Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Stephan Linz 提交于
Signed-off-by: NStephan Linz <linz@li-pro.net> Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Stephan Linz 提交于
Signed-off-by: NStephan Linz <linz@li-pro.net> Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
- 08 12月, 2009 1 次提交
-
-
由 Graeme Smecher 提交于
A typo caused the stack and malloc regions to overlap, which prevented mem_malloc_init() from returning. This commit makes the memory layout match the example described in include/configs/microblaze-generic.h Signed-off-by: NGraeme Smecher <graeme.smecher@mail.mcgill.ca> Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
- 03 10月, 2009 3 次提交
-
-
由 Michal Simek 提交于
With Hush parser is possible to change command line in dtb Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
If is full malloc area global, data are rewrite because there was bad size of malloc area. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
- 14 9月, 2009 3 次提交
-
-
由 Michal Simek 提交于
With Hush parser is possible to change command line in dtb Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
If is full malloc area global, data are rewrite because there was bad size of malloc area. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
- 13 6月, 2009 1 次提交
-
-
由 Stefan Roese 提交于
By changing the cmd_mtdparts to only use the MTD infrastructure and not the direct interface to the CFI NOR FLASH driver we now need to add the MTD infrastructure to all boards using those mtdparts commands. This patch adds those components: CONFIG_MTD_DEVICE (for all FLASH types) plus CONFIG_FLASH_CFI_MTD (for NOR FLASH) To all board maintainers: Please test this on your platforms and report any problems/issues found. Thanks. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Ron Madrid <info@sheldoninst.com> Cc: Georg Schardt <schardt@team-ctech.de> Cc: Michal Simek <monstr@monstr.eu> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Martin Krause <martin.krause@tqs.de> Cc: Gary Jennejohn <garyj@denx.de> Cc: Ricardo Ribalda <ricardo.ribalda@uam.es>
-
- 21 3月, 2009 1 次提交
-
-
由 Stefan Roese 提交于
Currently the mtdparts commands are included in the jffs2 command support. This doesn't make sense anymore since other commands (e.g. UBI) use this infrastructure as well now. This patch separates the mtdparts commands from the jffs2 commands making it possible to only select mtdparts when no JFFS2 support is needed. Signed-off-by: NStefan Roese <sr@denx.de> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
- 18 2月, 2009 1 次提交
-
-
由 Mike Frysinger 提交于
The CONFIG_CMD_ENV option controls enablement of the `saveenv` command rather than a generic "env" command, or anything else related to the environment. So, let's make sure the define is named accordingly. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 23 1月, 2009 3 次提交
-
-
由 Michal Simek 提交于
-
由 Michal Simek 提交于
Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
- 10 12月, 2008 2 次提交
-
-
由 Michal Simek 提交于
-
由 Michal Simek 提交于
Signed-off-by: NMichal Simek <monstr@monstr.eu>
-