- 14 2月, 2018 14 次提交
-
-
由 Tuomas Tynkkynen 提交于
Signed-off-by: NTuomas Tynkkynen <tuomas@tuxera.com>
-
由 Tuomas Tynkkynen 提交于
Signed-off-by: NTuomas Tynkkynen <tuomas@tuxera.com>
-
由 Tuomas Tynkkynen 提交于
Signed-off-by: NTuomas Tynkkynen <tuomas@tuxera.com>
-
由 Tuomas Tynkkynen 提交于
Signed-off-by: NTuomas Tynkkynen <tuomas@tuxera.com>
-
由 Tuomas Tynkkynen 提交于
Signed-off-by: NTuomas Tynkkynen <tuomas@tuxera.com>
-
由 Max Filippov 提交于
This allows running tests on emulated KC705 board with DC233C xtensa core. It expects to find conf.xtfpga_qemu in the uboot-test-hooks. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
-
由 Max Filippov 提交于
Remove CONFIG_BOOT_RETRY_TIME as it doesn't do much good and enable CONFIG_HUSH_PARSER in xtfpga_defconfig. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
-
由 Max Filippov 提交于
xtensa toolchains are core-specific, so give full toolchain name and download corresponding prebuilt toolchain from the github release. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
-
由 Bin Meng 提交于
Fix build warning in arch/microblaze/lib/bootm.c with gcc 7.3.0: warning: this 'if' clause does not guard... [-Wmisleading-indentation] Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Bin Meng 提交于
Fix build warning in arch/arm/mach-omap2/emif-common.c and arch/arm/mach-omap2/omap4/emif.c with gcc 7.3.0: warning: duplicate 'const' declaration specifier [-Wduplicate-decl-specifier] Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Bin Meng 提交于
Fix build warning in drivers/video/ivybridge_igd.c with gcc 7.3.0: warning: 'ivb_pm_gt2' defined but not used [-Wunused-const-variable=] Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Marek Vasut 提交于
Add the missing header, otherwise CONFIG_SYS_MAX_FLASH_BANKS may be undeclared. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com>
-
由 Marek Vasut 提交于
Convert the CONFIG_UPDATE_TFTP and related symbols to Kconfig. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com>
-
由 Marek Vasut 提交于
Convert the CONFIG_CMD_FITUPD symbol to Kconfig. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com>
-
- 13 2月, 2018 6 次提交
-
-
-
由 Philipp Tomsich 提交于
The fdt_record_loadable()-function was wedged between other functions that were guarded by ARCH_FIXUP_FDT_MEMORY. This could lead to linker errors on some configurations. With this change, fdt_record_loadable() is moved out of the ARCH_FIXUP_FDT_MEMORY guard (plus I tried to retain alphabetical ordering for functions by placing it appropriately). References: 9f45aeb9 ("spl: fit: implement fdt_record_loadable") Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reported-by: NMichal Simek <michal.simek@xilinx.com> Tested-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Heinrich Schuchardt 提交于
In the following statements if (a) return a; if (a) return c; the second return can never be executed. Identified by cppcheck. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Alex Kiernan 提交于
When saving the environment on a platform which has DMA alignment larger than the natural alignment, env_fat_save triggers a debug message in file_fat_write: Saving Environment to FAT... writing uboot.env FAT: Misaligned buffer address (9df1c8e0) OK Signed-off-by: NAlex Kiernan <alex.kiernan@gmail.com>
-
-
- 11 2月, 2018 3 次提交
-
-
由 Tom Rini 提交于
On the NIOS2 and Xtensa architectures, we do not have CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current values into the defconfig and removing them from the headers. I did not attempt to add more default values in and for now will leave that to maintainers. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
git://github.com/agraf/u-boot由 Tom Rini 提交于
Patch queue for efi in 2018.03 - 2018-02-10 This time we have a few important bug fixes. Most noticable are: - Fix OpenBSD loader with CONFIG_BLK=n - Fix builds on various circumstances - Add missing stubs so callers don't call NULL - Bump UEFI revision to 2.7
-
- 10 2月, 2018 16 次提交
-
-
由 Heinrich Schuchardt 提交于
efi_disk_register should return as status code (efi_status_t). Disks with zero blocks should be reported as 'not ready' without throwing an error. This patch solves a problem running OpenBSD on system configured with CONFIG_BLK=n (e.g. i.MX6). Reported-by: NJonathan Gray <jsg@jsg.id.au> Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: NJonathan Gray <jsg@jsg.id.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
Add stubs for UpdateCapsule, QueryCapsuleCapabilities, and QueryVariableInfo. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
README.efi describes two different concepts: * U-Boot exposing the UEFI API * U-Boot running on top of UEFI. This patch splits the document in two. Religious references are removed. The separation of the concepts makes sense before detailing the internals of U-Boot exposing the UEFI API in a future patch. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
Change the return type of efi_driver_init() to efi_status_t. efi_driver_init() calls efi_add_driver() which returns an efi_status_t value. efi_driver_init() should not subject this value to a conversion to int losing high bits on 64bit systems. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
Currently the UEFI revision number in the system table header is set to 2.0.5. This version number does not refer to any existing version of the UEFI standard. Set the revision number to 2.7. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NMark Kettenis <kettenis@openbsd.org> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
Currently we set the function pointer for the CreateEventEx boot service to NULL. When called this would lead to an immediate failure. A function stub is provided which handles the case that the boot service is called without an event group and returns EFI_UNSUPPORTED otherwise. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
For EFI binaries we need special CFLAGS. They were specified for an object file that since has been replaced. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
The bootefi command is missing in the online help for bootefi bootmgr. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Heinrich Schuchardt 提交于
Before the patch an undefined constant EFI_SUBSYSTEM was used in the crt0 code. The current version of binutils does not swallow the error. https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=888403 The necessary constant IMAGE_SUBSYSTEM_EFI_APPLICATION is already defined in pe.h. So let's factor out asm-generic/pe.h for the image subsystem constants and use it in our assembler code. IMAGE_SUBSYSTEM_SAL_RUNTIME_DRIVER does not exist in the specification let's use IMAGE_SUBSYSTEM_EFI_ROM instead. The include pe.h is only used in code maintained by Alex so let him be the maintainer here too. Reported-by: NAndre Przywara <andre.przywara@arm.com> Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: NVagrant Cascadian <vagrant@debian.org> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 York Sun 提交于
To make this driver easier to be reused, dual-license DDR driver. Signed-off-by: NYork Sun <york.sun@nxp.com> CC: Simon Glass <sjg@chromium.org> CC: Tom Rini <trini@konsulko.com> CC: Heinrich Schuchardt <xypron.glpk@gmx.de> CC: Thomas Schaefer <thomas.schaefer@kontron.com> CC: Masahiro Yamada <yamada.masahiro@socionext.com> CC: Robert P. J. Day <rpjday@crashcourse.ca> CC: Alexander Merkle <alexander.merkle@lauterbach.com> CC: Joakim Tjernlund <joakim.tjernlund@transmode.se> CC: Curt Brune <curt@cumulusnetworks.com> CC: Valentin Longchamp <valentin.longchamp@keymile.com> CC: Wolfgang Denk <wd@denx.de> CC: Anatolij Gustschin <agust@denx.de> CC: Ira W. Snyder <iws@ovro.caltech.edu> CC: Marek Vasut <marek.vasut@gmail.com> CC: Kyle Moffett <Kyle.D.Moffett@boeing.com> CC: Sebastien Carlier <sebastien.carlier@gmail.com> CC: Stefan Roese <sr@denx.de> CC: Peter Tyser <ptyser@xes-inc.com> CC: Paul Gortmaker <paul.gortmaker@windriver.com> CC: Peter Tyser <ptyser@xes-inc.com> CC: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Zhao Qiang 提交于
config_phylib_all_drivers.h should be included when CONFIG_PHYLIB and CONFIG_TSEC_ENET are defined. Fixes: 3146f0c0 ("Move PHYLIB to Kconfig") Signed-off-by: NZhao Qiang <qiang.zhao@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Lukas Auer 提交于
Extend the instantiate_rng() function and the corresponding CAAM job descriptor to instantiate all RNG state handles. This moves the RNG instantiation code in line with the CAAM kernel driver. Previously, only the first state handle was instantiated. The second one was instantiated by the CAAM kernel driver. This works if the kernel runs in secure mode, but fails in non-secure mode since the kernel driver uses DEC0 directly instead of over the job ring interface. Instantiating all RNG state handles in u-boot removes the need for using DEC0 in the kernel driver, making it possible to use the CAAM in non-secure mode. Signed-off-by: NLukas Auer <lukas.auer@aisec.fraunhofer.de> Tested-by: NBryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Vinitha Pillai-B57223 提交于
Enable validation of boot.scr script prior to its execution dependent on "secureboot" flag in environment. Enable fall back option to qspi boot in case of secure boot. Signed-off-by: NSumit Garg <sumit.garg@nxp.com> Signed-off-by: NVinitha Pillai <vinitha.pillai@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Sriram Dash 提交于
Remove dependency of SYS_HAS_SERDES for Layerscape Chasis 2 and Layerscape Chasis 3. Signed-off-by: NSriram Dash <sriram.dash@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Rajat Srivastava 提交于
Currently in LS1088A, XIP mode in QSPI works up to 16 MB addresses. This patch enables QSPI support in XIP mode for addresses above 16 MB as well. Signed-off-by: NRajat Srivastava <rajat.srivastava@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
由 Hou Zhiqiang 提交于
Enable PCIe and E1000 in ls1046aqds lpuart defconfig. Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: NYork Sun <york.sun@nxp.com>
-
- 09 2月, 2018 1 次提交
-
-
由 Adam Ford 提交于
config_fallbacks.h has some logic that sets HAVE_BLOCK_DEVICE based on a list of enabled options. Moving HAVE_BLOCK_DEVICE to Kconfig allows us to drastically shrink the logic in config_fallbacks.h Signed-off-by: NAdam Ford <aford173@gmail.com> [trini: Rename HAVE_BLOCK_DEVICE to CONFIG_BLOCK_DEVICE] Signed-off-by: NTom Rini <trini@konsulko.com>
-