Now the user can select the CPU type for each target. Thus
CONFIG_SYS_CPU could be set globally.
Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>

Add new Kconfig option to let the user select the targets
CPU type. Each target have to select SUPPORTS_CPU_MIPS[32,64]_R[1,2]
to indicate which CPU types are supported.
Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>

Add new Kconfig option to let the user select the targets
endianess. Each target have to select SUPPORTS_BIG_ENDIAN
and/or SUPPORTS_LITTLE_ENDIAN to indicate which endianess
is supported.
Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>

Before this commit, the stack addresses for IRQ and FIQ modes,
IRQ_STACK_START and FIQ_STACK_START, were computed in interrupt_init but
they were not used.

This commit sets the stack pointers for IRQ and FIQ modes.
Signed-off-by: NGeorges Savoundararadj <savoundg@gmail.com>
Acked-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>

This commit relocates the exception vectors.
As ARM1176 and ARMv7 have the security extensions, it uses VBAR.  For
the other ARM processors, it copies the relocated exception vectors to
the correct address: 0x00000000 or 0xFFFF0000.
Signed-off-by: NGeorges Savoundararadj <savoundg@gmail.com>
Acked-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Tom Warren <twarren@nvidia.com>

A regression was introduced in commit 41623c91. The consequence of that
is the non-relocation of the section .vectors symbols :
_undefined_instruction, _software_interrupt, _prefetch_abort,
_data_abort, _not_used, _irq and _fiq.

Before commit 41623c91, the exception vectors were in a .text section.
The .text section has the attributes allocatable and executable [1].

In commit 41623c91, a specific section is created, called .vectors, with
the attribute executable only.

What have changed between commit 41623c91^ and 41623c91 is the attribute
of the section which contains the exception vectors.
An allocatable section is "a section [that] occupies memory during
process execution" [1] which is the case of the section .vectors.
Adding the lacking attribute (SHF_ALLOC or "a") for the definition of
the section .vectors fixed the issue.

To summarize, the fix has to mark .vectors as allocatable because the
exception vectors reside in "memory during execution" and they need to
be relocated.

[1] http://man7.org/linux/man-pages/man5/elf.5.htmlSigned-off-by: NGeorges Savoundararadj <savoundg@gmail.com>
Acked-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>

This commit introduces a Kconfig symbol for each ARM CPU:
CPU_ARM720T, CPU_ARM920T, CPU_ARM926EJS, CPU_ARM946ES, CPU_ARM1136,
CPU_ARM1176, CPU_V7, CPU_PXA, CPU_SA1100.
Also, it adds the CPU feature Kconfig symbol HAS_VBAR which is selected
for CPU_ARM1176 and CPU_V7.

For each target, the corresponding CPU is selected and the definition of
SYS_CPU in the corresponding Kconfig file is removed.

Also, it removes redundant "string" type in some Kconfig files.
Signed-off-by: NGeorges Savoundararadj <savoundg@gmail.com>
Acked-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>

In preparation for the SoCFPGA support of the designware I2C driver,
convert this driver to the common CONFIG_SYS_I2C framework.

This patch converts all users of this driver, this is:

- ST spearxxx boards
- AXS101 (ARC700 platform)

I couldn't test this patch on those boards. Only compile tested for all
spear boards. And tested on SoCFPGA.
Signed-off-by: NStefan Roese <sr@denx.de>
Reviewed-by: NMarek Vasut <marex@denx.de>
Acked-by: NAlexey Brodkin <abrodkin@synopsys.com>
Tested-by: NAlexey Brodkin <abrodkin@synopsys.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Vipin Kumar <vk.vipin@gmail.com>
Cc: Jeroen Hofstee <jeroen@myspectrum.nl>

Add support for I2C bus 1 on the i.MX28.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Heiko Schocher <hs@denx.de>

This patch permeates the struct i2c_adapter throughout the driver,
so that it can be used to determine which adapter should be used.
Note that the driver still supports only one adapter. Note that
the patch does shuffle mxs_i2c_set_bus_speed() to the top of the
driver, but the function remains unchanged.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Heiko Schocher <hs@denx.de>

This patch just converts the function prototypes used throughout
this driver to match those of the i2c framework. There is so far
no functional change. This patch does not do the deeper integration
of the framework bits.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Heiko Schocher <hs@denx.de>

This patch prepares the MXS I2C driver for the conversion to the
new I2C driver framework by pulling out the hard-coded I2C0 address
from all the places.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Heiko Schocher <hs@denx.de>

The following bard configurations have been without active maintenance
for a long time, and the board maintainer agrees to have them removed:

MPC5200:	TOP5200, MINI5200, EVAL5200
MPC860:		TOP860
at91sam9xeXXX:	top9000eval_xe, top9000su_xe
Signed-off-by: NWolfgang Denk <wd@denx.de>
Cc: Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
[trini: Add missing Kconfig removals]
Signed-off-by: NTom Rini <trini@ti.com>

Signed-off-by: NWolfgang Denk <wd@denx.de>

The logic of the return statement in sata_port_status() calls for a
bitwise 'AND' operator, not logical 'AND'. Fix the typo.
Reported-by: NJeroen Hofstee <jeroen@myspectrum.nl>
Cc: Jeroen Hofstee <jeroen@myspectrum.nl>
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>

This patch adds support for i211 as well as unprogrammed aka tools only
i210/i211 chip support.
Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com>

Odroid is based on Exynos4412.
Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>

There is no gaps in exynos gpio enum after rework, so the gpio
numbers should be adjusted to the new numbering.
Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>

There is no gaps in exynos gpio enum after rework, so the gpio
numbers should be adjusted to the new numbering.
Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>

There is no gaps in exynos gpio enum after rework, so the gpio
numbers should be adjusted to the new numbering.
Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>

There is no gaps in exynos gpio enum after rework, so the gpio
numbers should be adjusted to the new numbering.
Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>

Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>

The gpy0 don't need any additional register offset,
but the gpx0 does, so now it is fixed.
Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>

The gpf0 offset was bad and it's now fixed.
After fix gpio order in *pinctrl.dts , the gpy0 offset is not required now.
Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>

The pinctrl dts was imported from the kernel, but the order
of GPM and GPY is wrong. The gpio enum in: asm/arch/gpio.h
is proper.
Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>

This config is required by Odroid, and could be also useful for the other
boards.
Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>

The SD Card slot detection pin should be configured as input.
Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
Acked-by: NSimon Glass <sjg@chromium.org>

This adds custodian to the pmic subsystem.
Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
Cc: Tom Rini <trini@ti.com>

Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>

Commit ae83d882 moved the fixed size mentioned
in the comment but missed the comment.
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>

Some boards still use xstr(). Replace remaining occurrences
of xstr() by commonly used __stringify().
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

- switch to GENERIC_BOARD
- fix env support from eeprom
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>

This patch makes the following changes:
- Set kernel entry point correctly
- Append bootargs from image to global bootargs instead
        of replacing them
- Return end address instead of size from android_image_get_end()
- Give correct parameter to genimg_get_format() in boot_get_ramdisk()
- Move ramdisk message printing from android_image_get_kernel() to
	android_image_get_ramdisk()
Signed-off-by: NAhmad Draidi <ar2000jp@gmail.com>
Cc: Tom Rini <trini@ti.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

This file should contain the bin_hdr generated by the original Marvell
U-Boot implementation. As this is currently not included in this
U-Boot version, we have added this placeholder, so that the U-Boot
image can be generated without errors.

If you have a known to be working bin_hdr for your board, then you
just need to replace this text file here with the binary header
and recompile U-Boot.

In a few weeks, mainline U-Boot will get support to generate the
bin_hdr with the DDR training code itself. By implementing this code
as SPL U-Boot. Then this file will not be needed any more and will
get removed.
Signed-off-by: NStefan Roese <sr@denx.de>

Actually, unmap_sysmem() does nothing.  Just in case.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: NSimon Glass <sjg@chromium.org>

- Do not insert a whitespace between a function name and
   an open paranthesis
 - Fix comment style
 - Do not split an error message into multiple lines
   even if it exceeds 80 columns
 - Do not split "for" statement where it fits in 80 columns
 - Do not use assignment in if condition
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: NSimon Glass <sjg@chromium.org>

Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>

Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>

Since commit fe1378a9 (ARM: use r9 for gd), r9 register
is used on ARM to hold global_data.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: NJeroen Hofstee <jeroen@myspectrum.nl>