- Add inline helper macros for basic header processing
- Move common non inline code common/image.c
- Replace direct header access with the API routines
- Rename IH_CPU_* to IH_ARCH_*
Signed-off-by: NMarian Balakowicz <m8@semihalf.com>

Signed-off-by: NMarian Balakowicz <m8@semihalf.com>

allow to use a different server as set in serverip
add CONFIG_TFTP_FILE_NAME_MAX_LEN to configure the file name length
if not defined the max length will be at 128
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's
Signed-off-by: NHarald Welte <laforge@openmoko.org>

Add ifdef to bdinfo command to display ethernet information
only if CONFIG_CMD_NET is defined for arm modules.
Signed-off-by: NK R Gururaja Hebbar <gururajakr@sanyo.co.in>

- Fix EEPROM_data structure definition according to System EEPROM Data Format.
- Read MAC addresses from EEPROM to ethXaddr before saving ethXaddr to
  bd->bi_ethaddr.
Signed-off-by: NHaiying Wang <Haiying.Wang@freescale.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: NBen Warren <biggerbadderben@gmail.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Currently, when CONFIG_CMDLINE_EDITING is set, bootretry doesn't work.
This patch fixes the problem.
Signed-off-by: NAndreas Engel <andreas.engel@ericsson.com>

Signed-off-by: NLarry Johnson <lrj@acm.org>

Many of the SPD bytes for DDR2 SDRAM are not interpreted correctly by the
"i2c sdram" command.  This patch provides correct alternative
interpretations when DDR2 memory is detected.
Signed-off-by: NLarry Johnson <lrj@acm.org>

common/cmd_bmp.c fails to compile if CONFIG_VIDEO_BMP_GZIP
isn't defined. This patch fix this.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

main.c: In function 'readline_into_buffer':
main.c:927: warning: unused variable 'p_buf'
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: NScott McNutt <smcnutt@psyent.com>

Define the layout of a binary blob that contains a QE firmware and instructions
on how to upload it.  Add function qe_upload_firmware() to parse the blob and
perform the actual upload.  Add command-line command "qe fw" to take a firmware
blob in memory and upload it.  Update ft_cpu_setup() on 85xx to create the
'firmware' device tree node if U-Boot has uploaded a firmware.  Fully define
'struct rsp' in immap_qe.h to include the actual RISC Special Registers.
Signed-off-by: NTimur Tabi <timur@freescale.com>

Add new function readline_into_buffer() that allows the
output of readline to be put into a pointer to char buffer.

This refactoring allows other functions besides the
main command loop to also use the same input mechanism.
Signed-off-by: NJames Yang <James.Yang@freescale.com>
Acked-by: NJon Loeliger <jdl@freescale.com>

Ctrl combo key support is added, which is very useful to input Ctrl-C
for interrupt current job.
Also add usb_event_poll() calling to usb_kbd_testc(), which can get
key input when tstc() is called.
Signed-off-by: NZhang Wei <wei.zhang@freescale.com>

Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com>

We now have more useful version of do_mii() and everybody use it.
Gerald Van Baren says:

> When I originally wrote the mii command 6(!) years ago, I wrote a
> verbose version that printed human readable decomposition of the flags,
> etc., and a terse one that didn't print as much stuff and thus had a
> smaller memory footprint.
>
> It sounds like the terse version has withered and died, apparently
> people are only using the verbose version (which is very understandable,
> I do myself).
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: NGerald Van Baren <vanbaren@cideas.com>

If type mii command without arguments, we suffer from uninitialized argv[]
entries; for example we MIPS get stuck by TLB error.
Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com>

The newly introduced API (routines related to env vars) will need to call
it.
Signed-off-by: NRafal Zabdyr <armo@semihalf.com>

The existing code can show information about a gzip compressed BMP
image, but can't actually display it.

Therefore, move the decompression code out of bmp_info() and use it in
bmp_display() as well in order to display a compressed BMP image.

Also, clean things up a bit and fix a memory leak while we're at it.

[hskinnemoen@atmel.com: a bit of refactoring]
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

Ctrl combo key support is added, which is very useful to input Ctrl-C
for interrupt current job.
Also add usb_event_poll() calling to usb_kbd_testc(), which can get
key input when tstc() is called.
Signed-off-by: NZhang Wei <wei.zhang@freescale.com>
Signed-off-by: NMarkus Klotzbuecher <mk@denx.de>

This patch removes the unnecessary bit swapping when
booting .bit files with the 'fpga loadb' command.
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>

Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>

This patch adds a post configuration callback for Spartan2/3 FPGAs.
pre and post configuration callback are now optional and
not called when the function pointer is set to NULL.
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>

This patch removes the FPGA subsystem configuration through
the CONFIG_FPGA bitmask configuration option.

See README for the new options:

	CONFIG_FPGA,
	CONFIG_FPGA_<vendor>,
	CONFIG_FPGA_<family>
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>

With this patch it is possible to reimplement default_serial_console()
in board specific code. This will be done in the upcomming PMC440
U-Boot port. This also allows the lwmon board maintainer to
remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c.
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>

This patch adds a 'cu' like serial terminal command to u-boot
using which you can access other serial ports from the system console.

OpenMoko uses this in their Neo1973 phones to get access to the GSM
Modem and GPS chip from the bootloader.
Signed-off-by: NHarald Welte <laforge@openmoko.org>

that used to exist with the legacy NAND code
Signed-off-by: NHarald Welte <laforge@openmoko.org>

Signed-off-by: NHarald Welte <laforge@openmoko.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Implement a suggestion by Scott Wood to make the /chosen handling fine
grained.  Don't overwrite pre-existing properties on a per-property basis,
so if /chosen exists but a necessary /chosen/property doesn't, it gets
created.  If a /chosen property exists, it is NOT overwritten unless the
"force" flag is true.
Signed-off-by: NGerald Van Baren <vanbaren@cideas.com>

Add a note that "fdt copy" makes the new address active.
Remove most of the extra hints at the end of the fdt help.
Signed-off-by: NGerald Van Baren <vanbaren@cideas.com>

Fix a bug found and documented by Bartlomiej Sieka where the optional
value on "fdt set <path> <prop> [<val>]" wasn't optional.

=> fdt mknode / testnode
=> fdt print /testnode
testnode {
};
=> fdt set /testnode testprop
=> fdt print /testnode
testnode {
        testprop;
};
Signed-off-by: NGerald Van Baren <vanbaren@cideas.com>

Fix compiler warnings: On boards that don't have ethernets defined,
don't compile fdt_fixup_ethernet().

We use a combination of the serialN alias and CONFIG_CONS_INDEX to
determine which serial alias we should set linux,stdout-path to.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Modify common/Makefile to conditionally compile fdt_support.c based
on CONFIG_OF_LIBFDT.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NGerald Van Baren <vanbaren@cideas.com>