- 16 6月, 2012 2 次提交
-
-
由 Holger Brunck 提交于
Signed-off-by: NHolger Brunck <holger.brunck@keymile.com> cc: Kim Phillips <kim.phillips@freescale.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Gerlando Falauto <gerlando.falauto@keymile.com> cc: Heiko Schocher <hs@denx.de> Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Holger Brunck 提交于
This board is a MPC8360 board. Two flashes are present a NOR flash were u-boot and the u-boot environment is stored and a NAND flash for the application code. This board has 512MB SDRAM. Additionaly we introduce a common km8360.h file and convert kmeter1 to use this. Signed-off-by: NHolger Brunck <holger.brunck@keymile.com> Signed-off-by: NChristian Herzig <christian.herzig@keymile.com> cc: Kim Phillips <kim.phillips@freescale.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Gerlando Falauto <gerlando.falauto@keymile.com> cc: Heiko Schocher <hs@denx.de> Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
- 28 5月, 2012 2 次提交
-
-
由 Nobuhiro Iwamatsu 提交于
The AP-SH4A-4A board has SH7734, 64MB DDR2-SDRAM, USB, Ethernet, and more. This patch supports the following functions: - 64MB DDR2-SDRAM - 16MB NOR Flash memory - Serial console (SCIF) - Ethernet (SH-Ether with Gigabit) - I2C Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Nobuhiro Iwamatsu 提交于
The r0p7734 board has SH7734, 128MB DDR2-SDRAM, USB, Ethernet, and more. This patch supports the following functions: - 128MB DDR2-SDRAM - 32MB NOR Flash memory - Serial console (SCIF) - Ethernet (SH-Ether/SMSC) Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 15 5月, 2012 4 次提交
-
-
由 SRICHARAN R 提交于
Signed-off-by: NR Sricharan <r.sricharan@ti.com> CC: Aneesh V <aneesh@ti.com> CC: Tom Rini <trini@ti.com> Acked-by: NAneesh V <aneesh@ti.com>
-
由 David Purdy 提交于
This patch adds support for Cloud Engines Pogoplug E02 Information regarding the CE Pogoplug E02 board can be found at: http://archlinuxarm.org/platforms/armv5/pogoplug-v2-pinkgraySigned-off-by: NDave Purdy <david.c.purdy@gmail.com> Cc: prafulla@marvell.com Cc: albert.u.boot@aribaud.net
-
由 Luka Perkov 提交于
Add support for new boards RaidSonic ICY BOX NAS6210 and NAS6220. NAS6210 has 1 SATA and 1 eSATA port while NAS6220 has 2 SATA ports. More information about the boards can be found here: http://www.raidsonic.de/en/products/nas-systems.php?we_objectID=7036 http://www.raidsonic.de/en/products/nas-systems.php?we_objectID=7515Signed-off-by: NLuka Perkov <uboot@lukaperkov.net> Signed-off-by: NGerald Kerma <dreagle@doukki.net> Signed-off-by: NSimon Baatz <gmbnomis@gmail.com>
-
由 Vladimir Zapolskiy 提交于
This change adds a basic support for Embest/Timll DevKit3250 board, NOR and UART are the only supported peripherals for a moment. The board doesn't require low-level init, because the initial SDRAM and GPIO configuration is performed during kickstart bootloader execution. Signed-off-by: NVladimir Zapolskiy <vz@mleia.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: NMarek Vasut <marek.vasut@gmail.com>
-
- 22 4月, 2012 1 次提交
-
-
由 Macpaul Lin 提交于
board: Add config file of board adp-ag102 Add adp-ag102 into boards.cfg Add adp-ag102 into MAINTAINERS doc: add README of ag102 Signed-off-by: NMacpaul Lin <macpaul@andestech.com>
-
- 16 4月, 2012 1 次提交
-
-
由 Tom Rini 提交于
After removing omap1610inn for not building, move omap1510inn to orphaned. Also update boards.cfg to note it's part of the 'omap' SoC to make sure the board is built more often and future breakage noticed quicker. Acked-by: NMarek Vasut <marex@denx.de> Signed-off-by: NTom Rini <trini@ti.com>
-
- 29 3月, 2012 1 次提交
-
-
由 Tom Rini 提交于
The CS_AUTOBOOT configurations have been broken for a long time. Kshitij Gupta is no longer at TI making these broken and orphaned boards, so remove. Signed-off-by: NTom Rini <trini@ti.com>
-
- 28 2月, 2012 2 次提交
-
-
由 Tom Rini 提交于
Cc: Dirk Behme <dirk.behme@gmail.com> Signed-off-by: NTom Rini <trini@ti.com> Acked-by: Dirk Behme<dirk.behme@gmail.com>
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@ti.com>
-
- 13 2月, 2012 2 次提交
-
-
由 Dimitar Penev 提交于
This adds support for the BR4 Appliance. It is a quad channel ISDN BRI board based on Blackfin BF537 CPU. Signed-off-by: NDimitar Penev <dpn@switchfin.org> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Dimitar Penev 提交于
This add support for the PR1 Appliance - Asterisk based ISDN PRI PBX. This board is Blackfin BF537 based. The schematics are not fully opened. Signed-off-by: NDimitar Penev <dpn@switchfin.org> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 12 2月, 2012 8 次提交
-
-
由 Christian Riesch 提交于
This patch adds support for the Calimain board from OMICRON electronics GmbH. The board features a Texas Instruments AM1808 SoC, 128 MB DDR2 memory, and 64 MB NOR flash memory connected to CS2 and CS3. Signed-off-by: NChristian Riesch <christian.riesch@omicron.at>
-
由 Ilya Yanok 提交于
This patch adds support for the HTKW mcx AM3517-based board. Serial, Ethernet, NAND, MMC, RTC, EHCI USB host and both NAND and MMC SPLs are supported. Signed-off-by: NIlya Yanok <yanok@emcraft.com> Signed-off-by: NStefano Babic <sbabic@denx.de> CC: Tom Rini <tom.rini@gmail.com> Cc: Detlev Zundel <dzu@denx.de> Acked-by: NIgor Grinberg <grinberg@compulab.co.il>
-
由 Stefano Babic 提交于
The mt_ventoux board is a custom board using the Technexion TAM3517 module. The patch fixes also the mtdparts variable in the TAM3517 common configuration file. Signed-off-by: NStefano Babic <sbabic@denx.de> CC: Ilya Yanok <yanok@emcraft.com> CC: Igor Grinberg <grinberg@compulab.co.il> CC: Tom Rini <tom.rini@gmail.com> Cc: Detlev Zundel <dzu@denx.de> Acked-by: NIgor Grinberg <grinberg@compulab.co.il>
-
由 Chander Kashyap 提交于
SMDK5250 board is based on Samsungs EXYNOS5250 SoC. Signed-off-by: NChander Kashyap <chander.kashyap@linaro.org> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 HeungJun, Kim 提交于
This patch adds support for Samsung TRATS board Signed-off-by: NHeungJun, Kim <riverful.kim@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Stefan 提交于
This patch adds support for D-Link DNS-325 ShareCenter NAS. Signed-off-by: NStefan Herbrechtsmeier <stefan@code.herbrechtsmeier.net> Cc: prafulla@marvell.com Cc: albert.u.boot@aribaud.net
-
由 Thomas Weber 提交于
Tricorder is a board which is very similar to the Devkit8000. It is designed as a base platform for further medical devices. www.corscience.de/en/medical-engineering/products/multiparameter/mp10-board.html Signed-off-by: NThomas Weber <weber@corscience.de>
-
由 Stephen Warren 提交于
The Toshiba AC100 (Compal code-name Paz00, aka Dynabook AZ) is a netbook derived from the NVIDIA Tegra Harmony reference board. It ships with Android, but is often repurposed to run Linux. This patch adds just enough support to get a U-Boot serial console, and the ability access built-in eMMC and the external SD slot. v2: * Rebased on latest HEAD, incorporated changes made to other board files. * Moved board files from board/nvidia to board/compal. * Switched to correct odmdata value. This required add the previous patch to fix U-Boot's interpretation of the odmdata RAM size field. * Removed nvmem= from default Linux kernel command-line; no drivers use the reserved memory yet, so there's no point reserving it. Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
- 16 1月, 2012 3 次提交
-
-
由 Peter Barada 提交于
This patch adds basic support for OMAP35x/DM37x SOM LV/Torpedo reference boards. It assumes U-boot is loaded to SDRAM with the help of another small bootloader (x-load) running from SRAM. Signed-off-by: NPeter Barada <peter.barada@logicpd.com> Cc: Tom Rini <tom.rini@gmail.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Wolfgang Denk <wd@denx.de> Acked-by: NIgor Grinberg <grinberg@compulab.co.il>
-
由 Jason Liu 提交于
Add the initial support for Freescale i.MX6Q Sabre Lite board Signed-off-by: NDirk Behme <dirk.behme@de.bosch.com> Signed-off-by: NJason Liu <jason.hui@linaro.org> CC: Eric Nelson <eric.nelson@boundarydevices.com>
-
由 Fabio Estevam 提交于
Add initial support for Freescale MX28EVK board. Tested boot via SD card and by loading a kernel via TFTP through the FEC interface. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Acked-by: NMarek Vasut <marek.vasut@gmail.com> Acked-by: NStefano Babic <sbabic@denx.de>
-
- 14 1月, 2012 1 次提交
-
-
由 Stefan Kristiansson 提交于
Signed-off-by: NStefan Kristiansson <stefan.kristiansson@saunalahti.fi>
-
- 10 1月, 2012 2 次提交
-
-
由 Holger Brunck 提交于
This board is similar to our tuxx1 target. But on this board there is only one application specific chip select configured. Signed-off-by: NHolger Brunck <holger.brunck@keymile.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> Acked-by: NHeiko Schocher <hs@denx.de> Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Holger Brunck 提交于
These boards are from a u-boot point of view identical. So collect the two headerfiles to one, to decrease maintenance. Signed-off-by: NHolger Brunck <holger.brunck@keymile.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Heiko Schocher <hs@denx.de> Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
- 24 12月, 2011 3 次提交
-
-
由 Thierry Reding 提交于
The Medcom is a 16:9 15" terminal that is used for patient infotainment in hospitals. Changes in v3: * Remove unused implementation of gpio_config_uart(). * Implement MMC/SD card detection. * Drop board_mmc_getcd() which is now implemented by common Tegra2 code. * Add MAINTAINERS entry. Changes in v2: * No longer override the default CONFIG_SYS_TEXT_BASE setting. Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Thierry Reding 提交于
The Plutux is a set-top box device based on the Tamonten processor module. It can be connected to a display via an HDMI output. Changes in v3: * Remove unused implementation of gpio_config_uart(). * Implement MMC/SD card detection. * Drop board_mmc_getcd() which is now implemented by common Tegra2 code. * Add MAINTAINERS entry. Changes in v2: * No longer override the default CONFIG_SYS_TEXT_BASE setting. Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Stefano Babic 提交于
The twister board is a development board using the TAM3517 SOM. Support for NAND, 2 Ethernet (EMAC and SMC911), USB (EHCI_OMAP). Signed-off-by: NStefano Babic <sbabic@denx.de> CC: Tapani Utrianen <tapani@technexion.com> CC: Tom Rini <tom.rini@gmail.com> CC: Sandeep Paulraj <s-paulraj@ti.com>
-
- 10 12月, 2011 3 次提交
-
-
由 Jason Liu 提交于
Add the initial support for Freescale i.MX6Q Armadillo2 board Support: MMC boot from slot 0/1, debug UART(UART4), usdhc. There is two MMC slots on the boards: mmc dev 0 -> connect USDHC3 -> the lower slot on the board, mmc dev 1 -> connect USDHC4 -> the upper slot on the board, Signed-off-by: NJason Liu <jason.hui@linaro.org> Cc: Stefano Babic <sbabic@denx.de> Tested-by: NDirk Behme <dirk.behme@de.bosch.com>
-
由 Chander Kashyap 提交于
As per new naming convention for Samsung SoC's, all Cortex-A9 and Cortex-A15 based SoC's will be classified under the name Exynos. Cortex-A9 and Cortex-A15 based SoC's will be sub-classified as Exynos4 and Exynos5 respectively. In order to better adapt and reuse code across various upcoming Samsung Exynos based boards, all uses of s5pc210 prefix/suffix/directory-names are renamed in this patch. s5pc210 is renamed as exynos4210 and S5PC210/s5pc210 suffix/prefix are renamed as exynos4/EXYNOS4. Signed-off-by: NChander Kashyap <chander.kashyap@linaro.org> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Stephen Warren 提交于
Ventana is a board which is very similar to Seaboard. Support it by re-using board/nvidia/seaboard/seaboard.c with minor run-time conditionals. v5: Makefile: Use cmd_link_o_target, remove unused clean/distclean targets. v6: Make gpio_config_uart_seaboard() static. v7: Add MAINTAINERS entry for Ventana. Tom Warren doesn't have Ventana, so he asked me to add myself for this board. Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
- 09 12月, 2011 3 次提交
-
-
由 Kyle Moffett 提交于
The eXMeritus HWW-1U-1A unit is a DO-160-certified 13lb 1U chassis with 3 independent TEMPEST zones. Two independent P2020 computers may be found inside each zone. Complete hardware support is included. High-level hardware overview: * DO-160 certified for passenger aircraft (noncritical) * TEMPEST ceritified for RED/BLACK separation * 3 zones per chassis, 2 computers per zone (total of 6) * Dual-core 1.066GHz P2020 per computer * One 2GB DDR2 SO-RDIMM module per computer (upgradable to 4GB) * Removable 80GB or 160GB Intel X18-M SSD per computer * Front-accessible dual-port E1000E per computer * Front-accessible serial console per computer * Front-accessible USB port per computer * Internal Gigabit crossover within each TEMPEST zone * Internal unidirectional fiber links across TEMPEST zones * Battery-backed DS1339 I2C RTC on each CPU. Combined, each 13lb 1U chassis contains 12GB RAM, 12 cores @ 1.066GHz, 12 front-accessible Gigabit Ethernet ports and 960GB of solid-state storage with a total power consumption of ~200W. Additional notes: * SPD detection is only known to work with the DO-160-certified DIMMs * CPU reset is a little quirky due to hardware misfeature. Proper support for the hardware reset mechanism has been left for a later patch series to address. Signed-off-by: NKyle Moffett <Kyle.D.Moffett@boeing.com> Cc: Andy Fleming <afleming@gmail.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Wolfgang Denk 提交于
The "rmu" board has long been unmaintained, and is broken. Remove it. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
The BAB7xx boards are almost deceased. They cause build warnings, an it's not worth the effort to fix these. Remove the dead body. Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Frank Gottschling <fgottschling@eltec.de>
-
- 07 12月, 2011 2 次提交
-
-
由 Heiko Schocher 提交于
- booting from NOR Flash with direct boot method - POST support - LOGBUF support Signed-off-by: NHeiko Schocher <hs@denx.de> Cc: Paulraj Sandeep <s-paulraj@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Christian Riesch <christian.riesch@omicron.at>
-
由 Marek Vasut 提交于
The board is unmaintained and maintainer doesn't respond. Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de>
-