- 22 5月, 2017 3 次提交
-
-
由 rick 提交于
Support Andestech AE3xx platform: serial, timer device tree flow. Signed-off-by: Nrick <rick@andestech.com>
-
由 rick 提交于
Support AG101P timer device tree flow. Signed-off-by: Nrick <rick@andestech.com>
-
由 rick 提交于
Support AG101P serial device tree flow. Signed-off-by: Nrick <rick@andestech.com>
-
- 18 5月, 2017 9 次提交
-
-
由 Ley Foon Tan 提交于
Add config and defconfig for the Arria10 and update socfpga_common.h. Signed-off-by: NTien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>
-
由 Stefano Babic 提交于
mx7dsabresd_secure_defconfig was not updated after moving to DM. Signed-off-by: NStefano Babic <sbabic@denx.de>
-
由 Peng Fan 提交于
Switch to use DM USB. Signed-off-by: NPeng Fan <peng.fan@nxp.com>
-
由 Peng Fan 提交于
Enable more DM drivers. The imx I2C/MMC DM drivers needs DM_GPIO enabled. The 74x164 drivers needs SOFT_SPI and DM_GPIO enabled. So needs to enable them together. Signed-off-by: NPeng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
-
由 Peng Fan 提交于
Add basic dts for i.MX7D-SDB board. Signed-off-by: NPeng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
-
由 Fabio Estevam 提交于
Now that mx6sabresd_spl_defconfig can be used to boot all mx6sabresd variants, the non-SPL targets can be safely removed. Signed-off-by: NFabio Estevam <fabio.estvam@nxp.com>
-
由 Fabio Estevam 提交于
Currently only MX6Q/QP sabresd boards are supported in SPL. In order to also support MX6DL we need to convert to using IOMUX_PADS and SETUP_IOMUX_PADS macros. Other than that move the <asm/arch/mx6-ddr.h> header inclusion to the SPL code block in order to avoid build error. Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com> Reviewed-by: NJagan Teki <jagan@openedev.com>
-
由 Jagan Teki 提交于
SPL FIT is able to pick the suitable fdt file for u-boot, so add that function through board_fit_config_name_match. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
-
由 Jagan Teki 提交于
Set fdt_file env variable during board_late_init Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
-
- 17 5月, 2017 1 次提交
-
-
由 Bin Meng 提交于
This turns on ACPI S3 resume for minnowmax board. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Tested-by: NStefan Roese <sr@denx.de>
-
- 16 5月, 2017 3 次提交
-
-
由 Adam Ford 提交于
Enable TI_COMMON_CMD_OPTIONS and remove similar options from the defconfig. Updated with savedefconfig CMD_USB isn't enabled yet. I have some testing to do with musb. Signed-off-by: NAdam Ford <aford173@gmail.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Follow the exiting logic for the i.MX options when migrating this option. Cc: Marek Vasut <marex@denx.de> Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NMarek Vasut <marex@denx.de>
-
由 Tom Rini 提交于
Migrate the rest of the users of CONFIG_USB_EHCI_HCD over to Kconfig. For a few SoCs, imply or default y this if USB is enabled. In some cases we had not already migrated to CONFIG_USB so do that as well. Cc: Marek Vasut <marex@denx.de> Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NMarek Vasut <marex@denx.de>
-
- 15 5月, 2017 7 次提交
-
-
由 Tom Rini 提交于
Move this entry to Kconfig. As it is a hardware watchdog, select HW_WATCHDOG. While we could default to enabling this for all platforms, it is currently only enabled by default on AM33XX, so keep that logic today. Cc: Roger Meier <r.meier@siemens.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
The symbols CONFIG_OMAP3_GPIO_X control if we enable the clocks for a given GPIO bank in U-Boot. select the required banks for each target. In some cases we need to also migrate from CONFIG_USB_EHCI (deprecated, in include/configs/) to CONFIG_USB_EHCI_HCD as we only require the GPIO bank to be enabled if USB is also enabled. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
While in theory this value could be used in places outside of "omap5" (such as OMAP4), we only make use of it today in OMAP5, so place the Kconfig entry there. Given that Kconfig lets us provide a default, we drop CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC entirely. The contents of doc/README.omap-reset-time make a good help entry, so adjust them slightly and delete the file. Move the comment about range to where we use the value now, and have Kconfig enforce the upper bound. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Sekhar Nori 提交于
Drop custom command prompt string in favor of default used by U-Boot. This helps in easier automation setup across boards. Signed-off-by: NSekhar Nori <nsekhar@ti.com>
-
由 Masahiro Yamada 提交于
As commit 54925327 ("mmc: move CONFIG_GENERIC_MMC to Kconfig") addressed, this is one of the last weird defconfigs that define CONFIG_GENERIC_MMC without CONFIG_MMC. Now I took a closer look at this. Given that both CONFIG_CMD_MMC and CONFIG_GENERIC_MMC are set for this defconfig, CONFIG_MMC should be enabled. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
As commit 54925327 ("mmc: move CONFIG_GENERIC_MMC to Kconfig") addressed, this is one of the last weird defconfigs that define CONFIG_GENERIC_MMC without CONFIG_MMC. Now I took a closer look at this. Given that neither CONFIG_CMD_MMC nor CONFIG_MMC is set for this defconfig, CONFIG_GENERIC_MMC should be disabled. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Simon Glass 提交于
This option is pretty old. It predates CONFIG_SYS_I2C which is itself deprecated in favour of driver model. Disable it for all boards. Also drop I2C options which depend on this. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 12 5月, 2017 4 次提交
-
-
由 Sekhar Nori 提交于
Now that we support using TI_COMMON_CMD_OPTIONS, we dont have to enable a number of commands explicitly in the defconfig if we enable TI_COMMON_CMD_OPTIONS. Enable TI_COMMON_CMD_OPTIONS and regenerate the defconfig using "make savedefconfig". CMD_GPIO has been kept disabled because there is no GPIO support (yet) on OMAP-L138 LCDK. Signed-off-by: NSekhar Nori <nsekhar@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Lokesh Vutla 提交于
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Paul Burton 提交于
CONFIG_DISTRO_DEFAULTS selects a number of things we want for Boston defconfigs & generally describes what we want - to be able to boot an arbitrary Linux distribution. Enable it in order to shorten the defconfigs & to automatically keep up with any changes in the choice of Kconfig symbols selected. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 B, Ravi 提交于
Enables qspi boot configuration for dra7xx platform. Signed-off-by: NRavi Babu <ravibabu@ti.com> Reviewed-by: NLukasz Majewski <lukma@denx.de>
-
- 11 5月, 2017 8 次提交
-
-
由 Jagan Teki 提交于
SPL FIT is able to pick the suitable fdt file for u-boot, so add that function through board_fit_config_name_match. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
-
由 Jagan Teki 提交于
Set fdt_file env variable during board_late_init Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
-
由 Eric Gao 提交于
Add mipi dsi configs for rk3399 evb board Signed-off-by: NEric Gao <eric.gao@rock-chips.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Jacob Chen 提交于
Since this driver can be used for rk8xx series pmic, let's rename rk808 to rk8xx, to make it clear. Configs parts are done by sed -i "s/RK808/RK8XX/g" `grep RK808 -lr ./` Signed-off-by: NJacob Chen <jacob-chen@iotwrt.com>
-
由 Jonas Karlman 提交于
Set ethernet mac address in late init for Tinker Board, prevents getting a random mac address each boot. Read mac address from eeprom, first 6 bytes from m24c08@50. Same as /etc/init.d/rockchip.sh on Tinker OS. Signed-off-by: NJonas Karlman <jonas@kwiboo.se> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Kever Yang 提交于
The file is from evb-rk3399_defconfig with changes: - use rk3399-firefly dtb - re-order by make savedefconfig Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Kever Yang 提交于
Enable gmac for evb-rk3399. Change-Id: I85e35667e08e22e38577e63eb0e65731fc9c69b6 Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 eric.gao@rock-chips.com 提交于
1. add Kconfig for rockchip video driver, so that video port can be selected as needed. 2. move VIDEO_ROCKCHIP option to new Kconfig for concision. Signed-off-by: NEric Gao <eric.gao@rock-chips.com> Acked-by: NSimon Glass <sjg@chromium.org> Drop indenting in Kconfig: Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 10 5月, 2017 5 次提交
-
-
由 Álvaro Fernández Rojas 提交于
Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com>
-
由 Álvaro Fernández Rojas 提交于
Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Álvaro Fernández Rojas 提交于
Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Álvaro Fernández Rojas 提交于
This serves as an example for bcm6358-leds. Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Álvaro Fernández Rojas 提交于
This board has several LEDs attached to its BCM6328 led controller. Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-