Signed-off-by: NJosh Wu <josh.wu@atmel.com>
Acked-by: NAndreas Bießmann <andreas.devel@googlemail.com>
Signed-off-by: NAndy Fleming <afleming@freescale.com>

- update clock settings for higher perfomance
- change standard baud rate to 115200
- fix flash base address
- remove unused defines
- add I2C support
- switch form board dependent flash to cfi
- remove board dependent flash code
- use sdram bank 0 instead of bank 1 on boot
- enable on board frame buffer instead external
- remove fake mac address form config
- add watchdog support
- add status led support
Signed-off-by: NJens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
[agust: fixed small style issues and build warning]
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

Signed-off-by: NRaphael Assenat <raph@8d.com>
[trini: Squash boards.cfg / MAINTAINERS change into main patch]
Signed-off-by: NTom Rini <trini@ti.com>

Based on previous work by: Alistair Buxton <a.j.buxton@gmail.com>
Signed-off-by: NPali Rohár <pali.rohar@gmail.com>
Cc: Ивайло Димитров <freemangordon@abv.bg>

This adds board support for the Toradex Colibri T20 module.

Working functions:
- SD card boot
- USB boot
- Network
- NAND environment
Signed-off-by: NLucas Stach <dev@lynxeye.de>
Signed-off-by: NTom Warren <twarren@nvidia.com>

These boards have long reached EOL, and there has been no indication
of any active users of such hardware for years.  Get rid of the dead
weight.
Signed-off-by: NWolfgang Denk <wd@denx.de>
Cc: Wolfgang Grandegger <wg@denx.de>

Add targets of am335x_evm_uart{1,2,3,4,5} to have serial input/output on
UART{1,2,3,4,5} for use with the Beaglebone RS232 cape, am335x_evm
daughterboard, and other custom configurations.

Modify target for am335x_evm to include SERIAL1 and CONS_INDEX=1
options in order to clarify UART selection requirements.
Signed-off-by: NAndrew Bradford <andrew@bradfordembedded.com>

Add Freescale MCF54418TWR ColdFire development board support.
Signed-off-by: NTsiChung Liew <tsicliew@gmail.com>
Signed-off-by: NJason Jin <Jason.jin@freescale.com>
Signed-off-by: NAlison Wang <b18965@freescale.com>

Add support for the new kmvect1 board powered by the mpc8309 processor.
As this board is very similar to the existing suvd3, instead of adding a
new config header file, just add a new config option to suvd3.h
Signed-off-by: NGerlando Falauto <gerlando.falauto@keymile.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

The T4240QDS is a high-performance computing evaluation, development and
test platform supporting the T4240 QorIQ Power Architecture™ processor.

SERDES Connections
  32 lanes grouped into four 8-lane banks
  Two “front side” banks dedicated to Ethernet
  Two “back side” banks dedicated to other protocols
DDR Controllers
  Three independant 64-bit DDR3 controllers
  Supports rates up to 2133 MHz data-rate
  Supports two DDR3/DDR3LP UDIMM/RDIMMs per controller
QIXIS System Logic FPGA

Each DDR controller has two DIMM slots. The first slot of each controller
has up to 4 chip selects to support single-, dual- and quad-rank DIMMs.
The second slot has only 2 chip selects to support single- and dual-rank
DIMMs. At any given time, up to total 4 chip selects can be used.

Detail information can be found in doc/README.t4qds
Signed-off-by: NYork Sun <yorksun@freescale.com>
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: NShengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com>
Signed-off-by: NAndy Fleming <afleming@freescale.com>

The sbc8548/60 (both similar, just variations in UART hardware)
support has been removed from the linux kernel as of v3.6-rc1~132
so lets also now remove it from the u-boot tree as well.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

As the board seems to be unmaintained for some time, lets remove
the support in mainline completely.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: James F. Dougherty <jfd@broadcom.com>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: NMarek Vasut <marex@denx.de>

Both big-endian and little-endian are tested with below commands:
Rom version: (Default, Now we config it as rom version)
qemu-system-mips64el -M mips -bios u-boot.bin -cpu MIPS64R2-generic -nographic
qemu-system-mips64 -M mips -bios u-boot.bin -cpu MIPS64R2-generic -nographic
Ram version:
qemu-system-mips64el -M mips -cpu MIPS64R2-generic -kernel u-boot -nographic
qemu-system-mips64 -M mips -cpu MIPS64R2-generic -kernel u-boot -nographic
Signed-off-by: NZhizhou Zhang <etou.zh@gmail.com>
Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>

Add basic support for HP iPAQ h2200 palmtop. h2200 palmtop was targeted
to general consumers. It has 64 MB of RAM, 32 MB flash. No intergrated
Wi-Fi nor Ethernet. Based on Intel PXA255 processor. It was shipped with
Windows CE 4.2 operating system.
Signed-off-by: NLukasz Dalek <luk0104@gmail.com>

mx6qsabreauto is a board based on mx6q SoC with the following features:
- 2GB of DDR3
- 2 USB ports
- 1 HDMI output port
- SPI NOR
- 2 LVDS LCD ports
- Gigabit Ethernet
- Camera
- eMMC and SD card slot
- Multichannel Audio
- CAN
- SATA
- NAND
- PCIE
- Video Input

Add very basic support for it.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>

mx6qsabresd is a board based on mx6q SoC with the following features:
- 1GB of DDR3
- 1 USB OTG port
- 1 HDMI output port
- SPI NOR
- LVDS panel
- Gigabit Ethernet
- Camera Connector
- eMMC and SD card slot
- Audio

Add very basic support for it.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>

Factor out common DDR3 initialization code, allowing easier maintainance of such
scripts.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>

Medcom is the marketing name for an older, PXA-based version of the same
device. In order to avoid confusion, rename the Tegra-based version to
the new marketing name.
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>
Acked-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NTom Warren <twarren@nvidia.com>

As the board seems to be unmaintained for some time, lets remove
the support in mainline completely.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: James MacAulay <james.macaulay@amirix.com>
Acked-by: NMarek Vasut <marex@denx.de>

As the board seems to be unmaintained for some time, lets remove
the support in mainline completely.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Peter De Schrijver <p2@mind.be>
Acked-by: NMarek Vasut <marex@denx.de>

Since the IOP480 (PPC401/3 variant from PLX) is only used on 2
boards that are not actively maintained, lets remove support
for it completely. This way the ppc4xx code will get a bit cleaner.
Signed-off-by: NStefan Roese <sr@denx.de>
Acked-by: NMatthias Fuchs <matthias.fuchs@esd.eu>
Acked-by: NMarek Vasut <marex@denx.de>

After taking with the former maintainer, delete this platform.  The
patch is from the former maintainer.
Signed-off-by: NTom Rini <trini@ti.com>

Due to grown code sizes the TQM85xx boards don't build any more with
some older tool chains (like ELDK 4.2).  As these boards have long
reached EOL it seems a waste of effort trying to fix them.  The vendor
has agreed to drop support for them, too.  So let's get rid of them.
Signed-off-by: NWolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
cc: Kim Phillips <kim.phillips@freescale.com>
Acked-by: NStefan Roese <sr@denx.de>

Add minimal support for Altera's SOCFPGA Cyclone 5 hardware.
Signed-off-by: NDinh Nguyen <dinguyen@altera.com>
Signed-off-by: NChin Liang See <clsee@altera.com>
Signed-off-by: NPavel Machek <pavel@denx.de>
Reviewed-by: NMarek Vasut <marex@denx.de>
Acked-by: NTom Trini <trini@ti.com>
Cc: Wolfgang Denx <wd@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Stefan Roese <sr@denx.de>
----
v8: Remove no_return attribute for reset_cpu

Based on v2012.10-rc2

Add support for Xilinx Zynq board.
Signed-off-by: NMichal Simek <monstr@monstr.eu>
Acked-by: NMarek Vasut <marex@denx.de>
CC: Joe Hershberger <joe.hershberger@gmail.com>

This patch adds support for the X600 SPEAr600 based board. Its also
the first SPEAr600 board that uses the newly introduced SPEAr600
SPL support. Xloader is not necessary any more. By using the new
"u-boot.spr" make target, one image will generated containing both,
U-Boot SPL (with mkimage header as needed by the SPEAr BootROM, and
the main U-Boot with mkimage header.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Amit Virdi <amit.virdi@st.com>
Cc: Vipin Kumar <vipin.kumar@st.com>

Add support for new board iConnect from Iomega.

More information about the device can be found here:

http://go.iomega.com/en/products/network-storage-desktop/wireless-data-station/network-hard-drive-iconnect/?partner=4735Signed-off-by: NLuka Perkov <uboot@lukaperkov.net>
Tested-by: NWojciech Dubowik <wojciech.dubowik@neratec.com>
Tested-by: NTim Fletcher <tim@night-shade.org.uk>

This patch adds support for the LaCie board d2 Network v2 which share
a lot of hardware caracteristics with the 2Big Network v2.

- CPU: Marvell 88F6281 1200Mhz
- SDRAM memory: 256MB DDR2 400Mhz
- 2 SATA ports: internal and eSATA
- Gigabit ethernet: PHY Marvell 88E1116R
- Flash memory: SPI NOR 512KB (Macronix MX25L4005A)
- i2c EEPROM: 512 bytes (24C04 type)
- 2 USB2 ports: host and host/device
- 1 push button
- 1 power switch
- 1 SATA LED (bi-color, blue and red)
Signed-off-by: NSimon Guinot <simon.guinot@sequanux.org>

This patch adds support for the LaCie boards Network Space v2 (Lite and
Mini). This two boards are derived from the Network Space v2 and a lot
of hardware caracteristics are shared.

- CPU: Marvell 88F6192 800Mhz
- SDRAM memory: 128MB DDR2 200Mhz
- 1 SATA port: internal
- Gigabit ethernet: PHY Marvell 88E1318
- Flash memory: SPI NOR 512KB (Macronix MX25L4005A)
- i2c EEPROM: 512 bytes (24C04 type)
- 2 USB2 ports (Lite only): host and host/device
- 1 push button
- 1 SATA LED (bi-color, blue and red)
Signed-off-by: NSimon Guinot <simon.guinot@sequanux.org>

Support of the MINI2440 board from FriendlyARM from
an old version of u-boot :
http://repo.or.cz/r/u-boot-openmoko/mini2440.git

Currently, supporting only boot from NOR.
Signed-off-by: NGabriel Huau <contact@huau-gabriel.fr>

The Armadillo-800EVA board has Renesas R-Mobile R8A7740, 512MB DDR3-SDRAM,
Ethernet, and more.

This patch supports the following functions:
 - 512MB DDR3-SDRAM
 - Serial console (SCIF)
 - Ethernet MAC(MII) & PHY(SMSC)
Signed-off-by: NHideyuki Sano <hideyuki.sano.dn@renesas.com>
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

The KZM-A9-GT board has Renesas R-Mobile SH73A0, 512MB DDR2-SDRAM,
USB, Ethernet, and more.

This patch supports the following functions:
	- 512MB DDR2-SDRAM
	- 16MB NOR Flash memory
	- Serial console (SCIF)
	- Ethernet (SMSC)
	- I2C
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>

This board is the only board that still sticks to OneNAND IPL.
Remove this board, since we have SPL around for a while and
OneNAND is well supported in the SPL framework. The board can
be revived if necessary.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Tom Rini <trini@ti.com>

This patch is derived from an older patch provided by atmel in its
buildroot-avr32-v3.0.0.tar.bz2
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>
cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: NHans-Christian Egtvedt <egtvedt@samfundet.no>

* add ram target for EB+CPUx9k2 board (eb_cpux9k2_ram_config)
Signed-off-by: NJens Scharsig <js_at_ng@scharsoft.de>
Signed-off-by: NJens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>

Add at91sam9x5 series spi flash boot support

Using at91sam9x5ek_spiflash to configure, then it can boot from at25df321
serial flash

SPI mater work in 30Mhz speed, while not 1Mhz speed. This will base on
atmel_spi patch, or else, it will occur receive overrun
Signed-off-by: NBo Shen <voice.shen@atmel.com>
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com>

* Move Efika MX Smarttop and Smartbook boards into a "genesi" vendor directory
* Rename efikamx -> mx51_efikamx since there is an mx53_efikamx and mx6_efikamx to come
Signed-off-by: NMatt Sealey <matt@genesi-usa.com>
Acked-by: NStefano Babic <sbabic@denx.de>
Acked-by: NStefano Babic <sbabic@denx.de>

Add SPL options to tegra20 config files and enable SPL build for
tegra20 boards.  Also remove redundant code from u-boot that is not
contained in SPL.
Signed-off-by: NAllen Martin <amartin@nvidia.com>
Acked-by: NStephen Warren <swarren@wwwdotorg.org>
Tested-by: NThierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: NTom Warren <twarren@nvidia.com>

This is make naming consistent with the kernel and devicetree and in
preparation of pulling out the common tegra20 code.
Signed-off-by: NAllen Martin <amartin@nvidia.com>
Acked-by: NStephen Warren <swarren@wwwdotorg.org>
Tested-by: NThierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: NTom Warren <twarren@nvidia.com>

The Raspberry Pi model B uses the BCM2835 SoC, has 256MB of RAM,
contains an SMSC 9512 USB LAN/Hub chip, and various IO connectors.
For more details, see http://www.raspberrypi.org/.

Various portions (cache enable, MACH_TYPE setup, RAM size limit, stack
relocation to top of RAM) extracted from work by:
Oleksandr Tymoshenko <gonzo@bluezbox.com>.

GPIO driver enablement by Vikram Narayanan <vikram186@gmail.com>.
Signed-off-by: NStephen Warren <swarren@wwwdotorg.org>
Acked-by: NTom Rini <trini@ti.com>