- 08 7月, 2014 30 次提交
-
-
由 Dirk Eibach 提交于
IHS I2C master support was merely a hack in the osd driver. Now it is a proper u-boot I2C framework driver, supporting the v2.00 master features. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
There is a new iocon hardware flavor, supporting DisplayPort finally. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
readl was called with values instead of pointers to these values. Why this ever did work is a mystery... Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Masahiro Yamada 提交于
Since ARRAY_SIZE macro is defined in include/common.h, re-defining it in arch-specific files is redundant. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NStefan Roese <sr@denx.de> Acked-by: NSonic Zhang <sonic.zhang@analog.com>
-
由 Vasili Galka 提交于
Add invalidate_dcache_range() and flush_dcache_range() for the blackfin architecture. Such functions already exist on this arch with different names, so just forward the call. This fixes the build of bf609-ezkit board as it uses drivers/net/designware.c which requires the above functions. Cc: Sonic Zhang <sonic.adi@gmail.com>, Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: NVasili Galka <vvv444@gmail.com>
-
由 Vasili Galka 提交于
get_sclk() was not defined in bfin_wdt.c, include the corresponding header. Cc: Sonic Zhang <sonic.adi@gmail.com> Signed-off-by: NVasili Galka <vvv444@gmail.com>
-
由 Vasili Galka 提交于
The csarX and cscrX registers in the fbcs_t struct are 16-bit for CONFIG_M5235 and 32-bit wide otherwise. The code in cpu_init.c accessed them always as 32-bit, effectively creating a wrong memory access on M5235. Fixed that by choosing out_be16/out_be32 depending on whether CONFIG_M5235 is defined or not. Cc: Jason Jin <Jason.jin@freescale.com> Signed-off-by: NVasili Galka <vvv444@gmail.com>
-
由 Vasili Galka 提交于
in_be16() shall be passed a pointer to register and not its value. This is clearly a typo resulting in a wrong memory access, so fix it. Cc: Alison Wang <b18965@freescale.com>, Jason Jin <Jason.jin@freescale.com> Signed-off-by: NVasili Galka <vvv444@gmail.com>
-
由 Masahiro Yamada 提交于
This board is old enough and has no maintainer. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
This board is old enough and has no maintainer. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
These boards are old enough and have no maintainers. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
These boards are old enough and have no maintainers. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
This board is old enough and has no maintainer. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
These boards are old enough and have no maintainers. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
These boards are old enough and have no maintainers. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Jeroen Hofstee 提交于
clang is tempted to inteprete such a condition as a assignment as well. Since it isn't don't use double brackets. cc: Tom Wai-Hong Tam <waihong@chromium.org> Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>
-
由 Jeroen Hofstee 提交于
Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>
-
由 Wu, Josh 提交于
The option can be used to save the environment in spi flash. Implementation code is already exist in command/env_sf.c. But the documentation is missing. This patch add the details for this option to the README file. Signed-off-by: NJosh Wu <josh.wu@atmel.com> Reviewed-by: NJagannadha Sutradharudu Teki <jaganna@xilinx.com>
-
由 Wu, Josh 提交于
Use get_device_and_partition() is better since: 1. It will call the device initialize function internally. So we can remove the mmc intialization code to save many lines. 2. It is used by fatls/fatload/fatwrite. So saveenv & load env should use it too. 3. It can parse the "D:P", "D", "D:", "D:auto" string to get correct device and partition information by run-time. Also we remove the FAT_ENV_DEVICE and FAT_ENV_PART. We use a string: FAT_ENV_DEVICE_AND_PART. For at91sam9m10g45ek, it is "0". That means use device 0 and if: a)device 0 has no partition table, use the whole device as a FAT file system. b)device 0 has partittion table, use the partition #1. Refer to the commit: 10a37fd7 for details of device & partition string. Signed-off-by: NJosh Wu <josh.wu@atmel.com> Reviewed-by: NStephen Warren <swarren@nvidia.com>
-
由 Cooper Jr., Franklin 提交于
* This is done by limiting the ARM's bandwidth and setting DSS priority in the EMIF controller to ensure underflows do not occur.
-
由 Franklin S. Cooper Jr 提交于
* Boot failures have been discovered due to a combination of routing issues and non optimal ddr3 timings in the EMIF * Since ddr3 timings are different after significant board layout changes different timings are required for alpha, beta and production boards. Signed-off-by: NFranklin S. Cooper Jr <fcooper@ti.com>
-
由 Tom Rini 提交于
Make it clear that we need to load a legacy-formatted (aka uImage) kernel into memory as well as the DT if used before using "spl export". Cc: Yebio Mesfin <ymesfin@ti.com> Signed-off-by: NTom Rini <trini@ti.com>
-
由 Felipe Balbi 提交于
J6 EVM can be built with UART3 as console, but currently there's nothing muxing UART3 correctly. Likely this only works because, based on commit log, author was only testing with UART3 boot and - I assume - ROM code leave UART3 correctly muxed in that case. If we want to boot from MMC and still use UART3 as console, then we need to mux those signals correctly. Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Masahiro Yamada 提交于
The directory arch/${ARCH}/cpu/${CPU} does not exist in avr32, blackfin, microblaze, nios2, openrisc, sandbox, x86. These architectures have only one CPU type. Defining CPU should not be required for such architectures. This commit allows cpu field (= the 3rd field of boards.cfg) to be kept blank. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Sonic Zhang <sonic.zhang@analog.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Thomas Chou <thomas@wytron.com.tw> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
-
由 Wu, Josh 提交于
In README file, add document for the missing configuration option: CONFIG_ENV_IS_IN_FAT. Signed-off-by: NJosh Wu <josh.wu@atmel.com> Reviewed-by: NStephen Warren <swarren@nvidia.com>
-
由 Masahiro Yamada 提交于
Commit 7d89982b stopped creating symbolic link arch/${arch}/include/asm/proc. We do not need to delete it by "make mrproper" any more. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Vasili Galka <vvv444@gmail.com>
-
由 Jeroen Hofstee 提交于
The code intends for the CM_DLL_READYST to be set, but actually polls till any bit is set since the logical AND is used instead of the bitwise one is used. Fix it. cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>
-
由 Simon Glass 提交于
We need to subtract two hex numbers. Avoid using strtonum() by doing the subtraction in bc with a suitable input base. Signed-off-by: NSimon Glass <sjg@chromium.org> Reported-by: NVasili Galka <vvv444@gmail.com>
-
- 07 7月, 2014 1 次提交
-
-
- 05 7月, 2014 9 次提交
-
-
由 Chin Liang See 提交于
To move the arch common function away from board folder to arch/arm/cpu/armv7/socfpga folder. Its to avoid code duplication for other non Altera dev kit which is using socfpga device. Signed-off-by: NChin Liang See <clsee@altera.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Dinh Nguyen <dinguyen@altera.com> Acked-by: NDetlev Zundel <dzu@denx.de>
-
由 Linus Walleij 提交于
Turn on generic board for the integrators, as per the request in the startup message. Everything just works, tested on the Integrator/AP and Integrator/CP. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Stephen Warren 提交于
Serial port, SD card, and LCD all work. Signed-off-by: NStephen Warren <swarren@wwwdotorg.org> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Christian Riesch 提交于
Signed-off-by: NChristian Riesch <christian.riesch@omicron.at>
-
由 Shaibal.Dutta 提交于
Fix following compilation error when CONFIG_ARM64 is defined Error: unknown or missing system register name at operand 2 -- `mrs x0,daifmsr daifset,#3' Signed-off-by: NShaibal.Dutta <shaibal.dutta@broadcom.com> Signed-off-by: NDarwin Rambo <drambo@broadcom.com> Reviewed-by: NDarwin Rambo <drambo@broadcom.com>
-
由 Łukasz Dałek 提交于
Enable 'generic board init' for H2200 palmtop. Signed-off-by: NLukasz Dalek <luk0104@gmail.com> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Jeroen Hofstee 提交于
cc: Tom Rini <trini@ti.com> Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl>
-
由 Albert ARIBAUD 提交于
Run tools/reformat.py -i -d '-' -s 8 to reorder boards as header comments suggest
-
由 Chin Liang See 提交于
Scan Manager driver will be called to configure the IOCSR scan chain. This configuration will setup the IO buffer settings Signed-off-by: NChin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Wolfgang Denk <wd@denx.de> CC: Pavel Machek <pavel@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
-