- 12 1月, 2008 11 次提交
-
-
由 Heiko Schocher 提交于
Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 James Yang 提交于
There were some size and unsigned problems. Also add support for "ll" size modifier in format string like glibc Signed-off-by: NJames Yang <James.Yang@freescale.com> Acked-by: NJon Loeliger <jdl@freescale.com>
-
由 Larry Johnson 提交于
(1) Remove unused symbol "CFG_EEPROM_PAGE_WRITE_ENABLE". (2) Use conditional Makefile.o. Signed-off-by: NLarry Johnson <lrj@acm.org>
-
由 Guennadi Liakhovetski 提交于
The TK885D board uses a TQM885D module from TQ, this port adds an own configuration file and adds a last_stage_init() method to configure the two PHYs, depending on the phy_auto_nego environment variable. Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-
-
-
-
-
由 Wolfgang Denk 提交于
-
由 Kumar Gala 提交于
main.c: In function 'readline_into_buffer': main.c:927: warning: unused variable 'p_buf' Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 11 1月, 2008 20 次提交
-
-
由 Anatolij Gustschin 提交于
Signed-off-by: NAnatolij Gustschin <agust@denx.de> Signed-off-by: NRodolfo Giometti <giometti@linux.it>
-
由 Anatolij Gustschin 提交于
Lines of the lenght CONSOLE_COLS or greater than CONSOLE_COLS are not displayed correctly. This is an attempt to fix this issue. Also add carriage return handling. Signed-off-by: NAnatolij Gustschin <agust@denx.de> Signed-off-by: NRodolfo Giometti <giometti@linux.it>
-
由 Stefan Roese 提交于
Clear possible errors in MCSR resulting from data-eye-search. If not done, then we could get an interrupt later on when exceptions are enabled. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Anatolij Gustschin 提交于
Rework Lime support for lwmon5 using new video driver Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Matthias Fuchs 提交于
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>
-
由 Matthias Fuchs 提交于
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>
-
由 Dave Liu 提交于
The DDR doesn't work on the 266MHz data rate, the patch fix the bug. Signed-off-by: NDave Liu <daveliu@freescale.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Dave Liu 提交于
Format the code, make it more readable Signed-off-by: NDave Liu <daveliu@freescale.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Dave Liu 提交于
Reduce the AL from 2 to 1 clock to improve the performance. Signed-off-by: NDave Liu <daveliu@freescale.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Dave Liu 提交于
According to the latest user manual of MPC8315E, 1) The SVCOD of HRCWL is different than 837x 2) The SCCR has changes Signed-off-by: NDave Liu <daveliu@freescale.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Dave Liu 提交于
The SPCR about TSEC priority is wrong. Signed-off-by: NMichael Barkowski <Michael.Barkowski@freescale.com> Signed-off-by: NJoe D'Abbraccio <Joe.D'abbraccio@freescale.com> Signed-off-by: NDave Liu <daveliu@freescale.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Dave Liu 提交于
Fix the typo in global_data.h Signed-off-by: NDave Liu <daveliu@freescale.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Dave Liu 提交于
clean up the cache config from configs.h of board Signed-off-by: NDave Liu <daveliu@freescale.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Anton Vorontsov 提交于
This is MPC8360E based board with: - 256MB fixed SDRAM; - 8MB Intel Strata NOR flash; - StMICRO 64MiB NAND flash; - two 10/100/1000 ethernet ports connected via Broadcom BCM5481 PHYs; - two 10/100 ethernet ports connected via National DP83848 PHYs; - one PCI and one miniPCI slots; - four serial ports (two NS16550-compatible, two UCCs); - four USB ports working through MPC8360E "FHCI" USB controller; - Fujitsu MB86277 graphics controller; - Analog to Digital Converter/Touchscreen controller, AD7843 connected to SPI. Features not supported in this patch are: - StMICRO 64MiB NAND flash (patch sent); - MINT framebuffer initialization (patch is pending); - Fetching production information from the EEPROM via I2C; - FHCI USB; - Two slow UCCs used as RS-485 UARTs. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Anton Vorontsov 提交于
New device trees will use "fsl,qe" compatible properties. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Kim Phillips 提交于
the new libfdt code only updates eth0 if CONFIG_HAS_ETH0 is defined; add the define to the missing board configs. Thanks to Emilian Medve for finding this. Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Jon Loeliger 提交于
-
由 Becky Bruce 提交于
Configure the number of bits used to address the banks inside the SDRAM device. The default register value of 0 means 2 bits to address 4 banks. Higher capacity devices like a 2GB DIMM require 3 bits to address 8 banks. Signed-off-by: NBecky Bruce <bgill@freescale.com>
-
由 Niklaus Giger 提交于
vxWorks expects in TLB 0 a entry for the Machine Check interrupt TLB 1 a entry for the RAM TLB 2 a entry for the EBC TLB 3 a entry for the boot flash After changing the baudrate to 9600 I had no problems to boot the vxWorks image as distributed by WindRiver (Revision 2.0/1 from June 18, 2007) Signed-off-by: NNiklaus Giger <niklaus.giger@netstal.com>
-
由 Larry Johnson 提交于
Signed-off-by: NLarry Johnson <lrj@acm.org>
-
- 10 1月, 2008 9 次提交
-
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NScott McNutt <smcnutt@psyent.com>
-
由 Ben Warren 提交于
Change return values of init() functions in all Ethernet drivers to conform to the following: >=0: Success <0: Failure All drivers going forward should return 0 on success. Current drivers that return 1 on success were left as-is to minimize changes. Signed-off-by: NBen Warren <biggerbadderben@gmail.com> Acked-by: NStefan Roese <sr@denx.de> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NKim Phillips <kim.phillips@freescale.com> Acked-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Acked-By: NTimur Tabi <timur@freescale.com>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
-
由 Kim Phillips 提交于
Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
-
由 Andy Fleming 提交于
These boards weren't updated by Kumar's config patch because they weren't in the tree, yet. Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
由 Timur Tabi 提交于
Define the layout of a binary blob that contains a QE firmware and instructions on how to upload it. Add function qe_upload_firmware() to parse the blob and perform the actual upload. Add command-line command "qe fw" to take a firmware blob in memory and upload it. Update ft_cpu_setup() on 85xx to create the 'firmware' device tree node if U-Boot has uploaded a firmware. Fully define 'struct rsp' in immap_qe.h to include the actual RISC Special Registers. Signed-off-by: NTimur Tabi <timur@freescale.com>
-
由 Kumar Gala 提交于
Either use the standard defines in asm/cache.h or grab the information at runtime from the L1CFG SPR. Also, minor cleanup in cache.h to make the code a bit more readable. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-