- 24 10月, 2014 1 次提交
-
-
由 Simon Glass 提交于
Adjust the configuration for the am33xx boards, including beagleboard, to use driver model. Signed-off-by: NSimon Glass <sjg@chromium.org> Acked-by: NTom Rini <trini@ti.com>
-
- 23 10月, 2014 21 次提交
-
-
由 Stefan Roese 提交于
The maxBCM board is equipped with the Marvell Armada-XP MV78460 SoC. It integrates an SPI NOR flash and an Marvell 88E6185 switch. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
This patch adds basic support for the Marvell DB-MV784MP-GP evaulation board. This is the first board that uses the recently created Armada XP 78460 SoC support. Signed-off-by: NStefan Roese <sr@denx.de> Tested-by: NLuka Perkov <luka@openwrt.org>
-
由 Stefan Roese 提交于
Additionally the SDRAM address decoding register address is not hard coded in the C code any more. A define is introduced for this base address. This makes is possible to use those gpio functions from other MVEBU SoC's as well. Signed-off-by: NStefan Roese <sr@denx.de> Tested-by: NLuka Perkov <luka@openwrt.org> Acked-by: NPrafulla Wadaskar <prafulla@marvell.com>
-
由 Stefan Roese 提交于
This makes is possible to use those gpio functions from other MVEBU SoC's as well. Signed-off-by: NStefan Roese <sr@denx.de> Tested-by: NLuka Perkov <luka@openwrt.org> Acked-by: NPrafulla Wadaskar <prafulla@marvell.com>
-
由 Stefan Roese 提交于
This move makes is possible to use this header not only from kirkwood platforms but from all Marvell mvebu platforms. Signed-off-by: NStefan Roese <sr@denx.de> Tested-by: NLuka Perkov <luka@openwrt.org> Acked-by: NPrafulla Wadaskar <prafulla@marvell.com>
-
由 Simon Glass 提交于
Add defines to enable the Chrome OS EC interface and set it up on init. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Convert the BCM2835 GPIO driver to use driver model, and switch over Raspberry Pi to use this, since it is the only board. Signed-off-by: NSimon Glass <sjg@chromium.org> Tested-by: NStephen Warren <swarren@wwwdotorg.org> Acked-by: NStephen Warren <swarren@wwwdotorg.org>
-
由 Simon Glass 提交于
Now that serial and GPIO are available for iMX.6, move cm_fx6 over as an example. Acked-by: NIgor Grinberg <grinberg@compulab.co.il> Signed-off-by: NSimon Glass <sjg@chromium.org> Acked-by: NNikita Kiryanov <nikita@compulab.co.il>
-
由 Nikita Kiryanov 提交于
Use gpio_request for all the gpios that are utilized by various subsystems in cm-fx6, and refactor the relevant init functions so that all gpios are requested during board_init(), not during subsystem init, thus avoiding the need to manage gpio ownership each time a subsystem is initialized. The new division of labor is: During board_init() muxes are setup and gpios are requested. During subsystem init gpios are toggled. Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il>
-
由 Simon Glass 提交于
Since this function can fail, check its return value. Signed-off-by: NSimon Glass <sjg@chromium.org> Tested-by: NNikita Kiryanov <nikita@compulab.co.il>
-
由 Simon Glass 提交于
This converts the Tegra SPI drivers to use driver model. This is tested on: - Tegra20 - trimslice - Tegra30 - beaver - Tegra124 - dalmore (not tested on Tegra124) Reviewed-by: NJagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Since spi_flash.h is supposed to be the public API for SPI flash, move private things to sf_internal.h. Also tidy up a few comment nits. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NJagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
-
由 Simon Glass 提交于
Adjust this board to use the driver model soft_spi implementation. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NJagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
-
由 Simon Glass 提交于
Move the exynos SPI driver over to driver model. This removes quite a bit of boilerplate from the driver, although it adds some for driver model. A few device tree additions are needed to make the SPI flash available. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NJagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
-
由 Simon Glass 提交于
With driver model GPIOs must be requested before use. Make sure this is done correctly. (Note that the soft SPI part of universal is omitted, since this driver is about to be replaced with a driver-model-aware version) Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
The wrong header is being included, thus requiring the code to re-declare the generic GPIO interface in each GPIO header. Fix this. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Robert Baldyga 提交于
Add proper initialization of GPIO pins used by software i2c. Signed-off-by: NRobert Baldyga <r.baldyga@samsung.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Marcel Ziswiler 提交于
Update Apalis T30 as per the following commits c3691392 tegra: dts: Add serial port details 461be2f9 kconfig: remove redundant "string" type in arch and board Kconfigs f1ef2b62 kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Marcel Ziswiler 提交于
Fix ASIX USB to Ethernet reset which due to the new driver model Tegra GPIO driver changes now requires a label string to be provided otherwise the reservation and subsequent direction/value calls will fail. This fixes a regression introduced by commit: 2fccd2d9 tegra: Convert tegra GPIO driver to use driver model Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com> Acked-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Marcel Ziswiler 提交于
This patch adds board support for the Toradex Apalis T30 a computer on module which can be used on different carrier boards. For the sake of ease of use we do not distinguish between different carrier boards for now as the base module features are deemed sufficient enough for regular booting. The following functionality is working so far: - eMMC boot and environment storage - Gigabit Ethernet (once Thierry's PCIe as well as my E1000 resp. i210 fixes hit mainline) - MMC/SD cards (both 8-bit as well as 4-bit slot) - USB client/host (dual role port as client e.g. for DFU/UMS, other two ports as host) Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com> Acked-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Stephen Warren 提交于
This pinmux tables currently omit any configuration for PCIe clk_req, wake, and rst pins, which in turn causes intermittent failures in U-Boot's PCIe support. Import an updated version of the pinmux tables which rectifies this. Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NTom Warren <twarren@nvidia.com>
-
- 17 10月, 2014 2 次提交
-
-
由 Ruchika Gupta 提交于
Signed-off-by: NRuchika Gupta <ruchika.gupta@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Ruchika Gupta 提交于
Hardware accelerated support for SHA-1 and SHA-256 has been added. Hash command enabled along with hardware accelerated support for SHA-1 and SHA-256 for platforms which have CAAM block. Signed-off-by: NRuchika Gupta <ruchika.gupta@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
- 11 10月, 2014 2 次提交
-
-
由 Andreas Bießmann 提交于
Signed-off-by: NAndreas Bießmann <andreas.devel@googlemail.com> Cc: Bo Shen <voice.shen@atmel.com>
-
由 Khoronzhuk, Ivan 提交于
Update readme file for Keystone II EVM boards to actual sources. Also correct some typos. For now the Edison evaluation board is added, README for K2E is mostly the same, so update README to contain information also for K2E evm. Rename file to README as it contains information for all keystone evm boards. Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
- 10 10月, 2014 9 次提交
-
-
由 Hannes Petermaier 提交于
The lines COL (collision detect) and CRS (carrier sense) needs to be connected and muxed to the CPSW MAC for a proper function in half-duplex Mode of the interface. Signed-off-by: NHannes Petermaier <oe5hpm@oevsv.at> Cc: Tom Rini <trini@ti.com>
-
由 David Müller (ELSOFT AG) 提交于
fix broken SPI access by adding/activating BOARD_EARLY_INIT_F functionality and calling spi_init_f() from there. Signed-off-by: NDavid Müller <d.mueller@elsoft.ch>
-
由 Alexander Kochetkov 提交于
Fix typo of commit d4e53f06. i2c2 pullup resisters are controlled by bit 0 of CONTROL_PROG_IO1. It's value after reset is 0x00100001. In order to clear bit 0, original code write 0xfffffffe to CONTROL_PROG_IO1 and toggle almost all default values. Original code affect following: * disable i2c1 pullup resisters * increase far end load setting for many modules * setup invalid SC/LB combination Signed-off-by: NAlexander Kochetkov <al.kochet@gmail.com> CC: Tom Rini <trini@ti.com> CC: Steve Kipisz <s-kipisz2@ti.com>
-
由 Masahiro Yamada 提交于
These boards have been orphaned for more than 6 months. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
These boards have been orphaned for more than 6 months. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
This board has been orphaned for more than 6 months. It is the last board defining CONFIG_APM821XX. The code inside #ifdef CONFIG_APM821XX should be removed too. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
This board has been orphaned for more than 6 months. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
These boards have been orphaned for more than 6 months. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Roger Quadros 提交于
On OMAP platforms, SATA controller provides the SCSI subsystem so implement scsi_init(). Get rid of the unnecessary sata_init() call from dra7xx-evm and omap5-uevm board files. Signed-off-by: NRoger Quadros <rogerq@ti.com>
-
- 09 10月, 2014 5 次提交
-
-
由 Nikita Kiryanov 提交于
Add default eeprom bus setting. This addresses the trimslice compile error that was introduced with the addition of this setting. Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il> Acked-by: NIgor Grinberg <grinberg@compulab.co.il>
-
由 Nobuhiro Iwamatsu 提交于
Setting to change the CPU frequency is only used version2. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
-
由 Nobuhiro Iwamatsu 提交于
This adds support version 0.963 for ES2 of lager board. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
-
由 Nobuhiro Iwamatsu 提交于
This updates QoS version 0.955 for ES1 of lager board. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
-
由 Nobuhiro Iwamatsu 提交于
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
-