- 02 9月, 2021 1 次提交
-
-
由 Peter Hoyes 提交于
The BASER_FVP board variant is implemented on top of the BASE_FVP board config (which, in turn, is based on the Juno Versatile Express board config). They all share a similar memory map - for BASER_FVP the map is inverted from the BASE_FVP (https://developer.arm.com/documentation/100964/1114/Base-Platform/Base---memory/BaseR-Platform-memory-map) * Create new TARGET_VEXPRESS64_BASER_FVP target, which uses the same board config as BASE_FVP and JUNO * Adapt vexpress_aemv8a.h header file to support BASER_FVP (and rename to vexpress_aemv8.h) * Enable config to switch to EL1 for the BASER_FVP * Create vexpress_aemv8r defconfig * Provide an MPU memory map for the BASER_FVP For now, only single core boot is supported. Signed-off-by: NPeter Hoyes <Peter.Hoyes@arm.com> [trini: Add MAINTAINERS, move BOOTCOMMAND to defconfig] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 01 9月, 2021 2 次提交
-
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_SYS_MALLOC_LEN Signed-off-by: NTom Rini <trini@konsulko.com> Acked-by: NSean Anderson <seanga2@gmail.com> Reviewed-by: NRick Chen <rick@andestech.com>
-
由 Tom Rini 提交于
Now that we have consistent usage, migrate this symbol to Kconfig. Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NRick Chen <rick@andestech.com>
-
- 23 7月, 2021 1 次提交
-
-
由 Andre Przywara 提交于
The ARM Juno boards can be used as somewhat decent machines to run off-the-shelf distributions, with USB, SATA, GBit Ethernet and 8GB of DRAM. With stable DTs in the board's NOR flash this would work really nicely, however the default boot command is to fetch a kernel and an initrd from the on-board NOR flash, which sounds somewhat embedded. Include the config_distro_bootcmd.h header and define the available devices (starting with USB, to catch USB installer sticks) to make distributions and UEFI work out of the box. The NOR flash kernel functionality is still preserved as the last resort, should all other methods fail. Signed-off-by: NAndre Przywara <andre.przywara@arm.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 25 2月, 2021 1 次提交
-
-
由 Diego Sueiro 提交于
Currently, the kernel devicetree is setting the DRAM size to ~4G. Signed-off-by: NDiego Sueiro <diego.sueiro@arm.com>
-
- 29 1月, 2021 1 次提交
-
-
由 Stanislav Pinchuk 提交于
Re-send because of line-wraps. This patch fixes the behaviour of the menuconfig's BOOTCOMMAND setting. Which is just ignored without that patch on vexpress_aemv8a platform. Signed-off-by: Stanislav.Pinchuk@kaspersky.com
-
- 08 7月, 2020 1 次提交
-
-
由 Andre Przywara 提交于
The arch timer on 64-bit Arm Ltd. platforms is driven by a 24 MHz crystal oscillator, so the frequency is not 25165824 MHz, as the current code suggests. Signed-off-by: NAndre Przywara <andre.przywara@arm.com> Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 09 5月, 2020 1 次提交
-
-
由 Ashok Reddy Soma 提交于
Move below defines which are used by mtest utility to Kconfig. CONFIG_SYS_MEMTEST_START CONFIG_SYS_MEMTEST_END Signed-off-by: NAshok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com> [trini: Fix kmcoge5ne board, re-run migration as well] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 07 5月, 2020 4 次提交
-
-
由 Andre Przywara 提交于
CONFIG_SEMIHOSTING is selected for the VFP target by the means of Kconfig already, there is no need to check this in the header file. Signed-off-by: NAndre Przywara <andre.przywara@arm.com> Reviewed-by: NLinus Walleij <linus.walleij@linaro.org> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Andre Przywara 提交于
The Juno board features a standard compliant EHCI/OHCI USB host controller pair, which we can just enable. The platform data is taken from the device tree. This allows to use USB mass storage (the only storage on a Juno r0) for loading. At least on my board USB seems a bit flaky, I need two "usb reset" sequences after the "usb start" to detect an USB hard drive. Signed-off-by: NAndre Przywara <andre.przywara@arm.com> Acked-by: NLiviu Dudau <liviu.dudau@arm.com> Reviewed-by: NLinus Walleij <linus.walleij@linaro.org> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Andre Przywara 提交于
The UART base clock rate was typo-ed in the header file, probably because the reference (the Linux .dts) was also wrong[1]. Fix the number to make the baud rate more correct. Signed-off-by: NAndre Przywara <andre.przywara@arm.com> Reviewed-by: NLinus Walleij <linus.walleij@linaro.org> [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=39a1a8941b2Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Andre Przywara 提交于
The U-Boot documentation explains that variables ending with "_r" hold addresses in DRAM, while those without that ending point to flash/ROM. The default variables for the Juno board pointing to the kernel and DTB load addresses were not complying with this scheme: they lack the extension, but point to DRAM. This is particularly confusing since the Juno board features parallel NOR flash, so there *is* a memory mapped NOR address holding a DTB, for instance. Fix the variables to use the proper names, changing initrd_addr to ramdisk_addr_r on the way, which seems to be more prevelant and documented. On the way adjust the FDT load address to be situated *before* the kernel, since users happened to overwrite the DTB by the kernel clearing its .BSS section during initialisation. Also remove the fdt_high and initrd_high variables (which were set to -1), to allow U-Boot moving those images around. This should avoid many problems in the future, but breaks loading Linux kernels < v4.2, since they expect the DTB to be loaded in the same 512MB region as the kernel. If you need to load such an old kernel, please set fdt_high to either 0xffffffffffffffff or 0xa0000000 (if you load the kernel to the beginning of DRAM). That fixes loading debug kernels, which happened to overwrite the DTB on certain setups. Signed-off-by: NAndre Przywara <andre.przywara@arm.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 24 4月, 2020 1 次提交
-
-
由 Peter Collingbourne 提交于
FVP now loads an Android boot image named boot.img if available, otherwise it falls back to the existing code path. Signed-off-by: NPeter Collingbourne <pcc@google.com> Reviewed-by: NRyan Harkin <ryan.harkin@linaro.org> Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 21 11月, 2019 1 次提交
-
-
由 Tom Rini 提交于
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: NTom Rini <trini@konsulko.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com> Reviewed-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
-
- 31 8月, 2019 1 次提交
-
-
由 Ryan Harkin 提交于
This reverts commit fc04b923 where the FVP DRAM configuration was added. Signed-off-by: NRyan Harkin <ryan.harkin@linaro.org> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NSudeep Holla <sudeep.holla@arm.com>
-
- 26 8月, 2019 1 次提交
-
-
由 Sudeep Holla 提交于
To support KVM, we need to drop at EL2 and not EL1 before we boot Linux kernel. This causes issues on platform with VHE and secondaries booting at EL2 via TF-A PSCI CPU_ON call. Cc: Ryan Harkin <ryan.harkin@linaro.org> Cc: Liviu Dudau <liviu.dudau@foss.arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: David Feng <fenghua@phytium.com.cn> Signed-off-by: NSudeep Holla <sudeep.holla@arm.com> Reviewed-by: NPeng Fan <peng.fan@nxp.com>
-
- 02 8月, 2019 2 次提交
-
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_AUTOBOOT_MENU_SHOW Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Rename this option to CONFIG_AUTOBOOT_MENU_SHOW this it relates to the autoboot functionality. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 20 10月, 2018 1 次提交
-
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_FLASH_CFI_DRIVER CONFIG_SYS_FLASH_USE_BUFFER_WRITE CONFIG_FLASH_CFI_MTD CONFIG_SYS_FLASH_PROTECTION CONFIG_SYS_FLASH_CFI Signed-off-by: NAdam Ford <aford173@gmail.com> [trini: Re-migrate] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 17 8月, 2018 1 次提交
-
-
由 Tom Rini 提交于
We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 07 5月, 2018 1 次提交
-
-
由 Tom Rini 提交于
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 16 3月, 2018 1 次提交
-
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_CONS_INDEX We have existing entries for this option in a number of places, with different guards on them. They're also sometimes used for things not directly inside of the serial driver. First, introduce a new symbol to guard the use of CONFIG_CONS_INDEX, so that in the case where we don't need this for the serial driver, but for some other use, we can still do it. Next, consolidate all of these into the single entry in drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that we can imply a correct value here to make the defconfig side of this smaller. Signed-off-by: NAdam Ford <aford173@gmail.com> [trini: Rework a lot of the logic here, such that I took authorship from Adam, but kept his S-o-B line] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 24 2月, 2018 1 次提交
-
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_BOOTP_BOOTPATH CONFIG_BOOTP_DNS CONFIG_BOOTP_GATEWAY CONFIG_BOOTP_HOSTNAME CONFIG_BOOTP_PXE CONFIG_BOOTP_SUBNETMASK CONFIG_CMDLINE_EDITING CONFIG_AUTO_COMPLETE CONFIG_SYS_LONGHELP CONFIG_SUPPORT_RAW_INITRD CONFIG_ENV_VARS_UBOOT_CONFIG Signed-off-by: NAdam Ford <aford173@gmail.com> [trini: Re-run the migration] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 11 2月, 2018 1 次提交
-
-
由 Tom Rini 提交于
On the NIOS2 and Xtensa architectures, we do not have CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current values into the defconfig and removing them from the headers. I did not attempt to add more default values in and for now will leave that to maintainers. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 29 1月, 2018 2 次提交
-
-
由 Alexander Graf 提交于
We want to use Kconfig logic to depend on whether pl01x devices are built in, so let's convert their inclusion selection to Kconfig. This round goes to pl01x. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
We want to use Kconfig logic to depend on whether pl01x devices are built in, so let's convert their inclusion selection to Kconfig. This round goes to pl011. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 21 10月, 2017 1 次提交
-
-
由 Adam Ford 提交于
We add the various SMC91XX symbols to drivers/net/Kconfig and then this converts the following to Kconfig: CONFIG_SMC911X CONFIG_SMC911X_BASE CONFIG_SMC911X_16_BIT CONFIG_SMC911X_32_BIT Signed-off-by: NAdam Ford <aford173@gmail.com> [trini: Apply to the rest of the tree, re-squash old and new patch] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 04 9月, 2017 2 次提交
-
-
由 Thomas Petazzoni 提交于
This commit removes definitions of CONFIG_SYS_BARGSIZE defined to be equal to CONFIG_SYS_CBSIZE in numerous configuration files. We remove such definitions in two situations: - CONFIG_SYS_CBSIZE is otherwise not defined in the board configuration file, which means the default value of CONFIG_SYS_CBSIZE == 256 applies. In this case, the default value of CONFIG_SYS_BARGSIZE == 512 (common/image.c) is suitable, as it is larger. - CONFIG_SYS_CBSIZE is defined in the board configuration file, but to a value equal or less than 512. In this case, the default value of CONFIG_SYS_BARGSIZE == 512 (common.image.c) is suitable, as it is equal or larger. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Thomas Petazzoni 提交于
Now that the fallback value of CONFIG_SYS_PBSIZE in include/config_fallbacks.h has been adjusted, remove its definition from a large number of board configuration files. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 15 8月, 2017 1 次提交
-
-
由 Sam Protsenko 提交于
Also introduce CONFIG_USE_BOOTARGS option so we can control if CONFIG_BOOTARGS defined at all. Signed-off-by: NSam Protsenko <semen.protsenko@linaro.org> [trini: Resync r8a779[56]_ulcb, various ls10xx targets] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 26 7月, 2017 1 次提交
-
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_ENV_IS_IN_FLASH Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 22 5月, 2017 1 次提交
-
-
由 Simon Glass 提交于
This option is not used in U-Boot. Drop it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 20 3月, 2017 1 次提交
-
-
由 Philipp Tomsich 提交于
Move this in to Kconfig with a default of 115200. Signed-off-by: NPhilipp Tomsich <philipp.tomsich@theobroma-systems.com> [trini: Run moveconfig.py, reword commit slightly] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 09 2月, 2017 1 次提交
-
-
由 Masahiro Yamada 提交于
CONFIG_CMD_ZIP is not defined by any board. I am moving CONFIG_CMD_UNZIP to defconfig files except UniPhier SoC family. I am the maintainer of UniPhier platform, so I know "select CMD_UNZIP" is better for this platform. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NMichal Simek <michal.simek@xilinx.com> Acked-by: NStefan Roese <sr@denx.de> Acked-by: NRyan Harkin <ryan.harkin@linaro.org> Tested-by: NRyan Harkin <ryan.harkin@linaro.org>
-
- 28 1月, 2017 1 次提交
-
-
由 Patrick Delaunay 提交于
Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Signed-off-by: NPatrick Delaunay <patrick.delaunay73@gmail.com>
-
- 04 12月, 2016 2 次提交
-
-
由 Yann E. MORIN 提交于
Currently, CMD_PXE is forcibly enabled in config_distro_defaults.h, so that general purpose distributions can rely on it being defined. This header is included, under conditions or not, by various archs or famillies of archs / SoCs. However, it is very possible that boards based on those SoCs will not have a physical ethernet connector at all, even if the have a MAC; for example, the Nanopi Neo AIR (sunxi H3) does not. It is also possible that network booting is absolutely not necessary for a device. However, it is not possible to disable the PXE command, as it is forcibly enabled and is non-configurable. But it turns out we already have a config option to build a distro-ready image, in the name of DISTRO_DEFAULTS. Move CMD_PXE out of the hard-coded config_distro_defaults.h into a Kconfig option, that gets selected by DISTRO_DEFAULTS when it is set. Signed-off-by: N"Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Joe Hershberger <joe.hershberger@ni.com> [trini: Make it select MENU, run moveconfig.py] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Also convert MENU while we're in here. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 20 9月, 2016 1 次提交
-
-
Move the config IDENT_STRING to Kconfig and migrate all boards [sivadur: Migrate zynq boards] Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com> [trini: Update configs, add some default to sunxi Kconfig] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 27 8月, 2016 1 次提交
-
-
由 Tom Rini 提交于
This series moves the CONFIG_SYS_CACHELINE_SIZE. First, in nearly all cases we are mirroring the values used by the Linux Kernel here. Also, so long as (and in this case, it is true) we implement flushes in hunks that are no larger than the smallest implementation (and given that we mirror the Linux Kernel, again we are fine) it is OK to align higher. The biggest changes here are that we always use 64 bytes for CPU_V7 even if for example the underlying core is only 32 bytes (this mirrors Linux). Second, we say ARM64 uses 64 bytes not 128 (as found in the Linux Kernel) as we do not need multi-platform support (to this degree) and only the Cavium ThunderX 88xx series has a use for such large alignment. Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Stefan Roese <sr@denx.de> Cc: Nagendra T S <nagendra@mistralsolutions.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: NLokesh Vutla <lokeshvutla@ti.com> Cc: Steve Rae <steve.rae@raedomain.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Stefan Agner <stefan.agner@toradex.com> Acked-by: NHeiko Schocher <hs@denx.de> Cc: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Cc: Peter Griffin <peter.griffin@linaro.org> Acked-by: NPaul Kocialkowski <contact@paulk.fr> Cc: Anatolij Gustschin <agust@denx.de> Acked-by: N"Pali Rohár" <pali.rohar@gmail.com> Cc: Adam Ford <aford173@gmail.com> Cc: Steve Sakoman <sakoman@gmail.com> Cc: Grazvydas Ignotas <notasas@gmail.com> Cc: Nishanth Menon <nm@ti.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Robert Baldyga <r.baldyga@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Thomas Weber <weber@corscience.de> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: David Feng <fenghua@phytium.com.cn> Cc: Alison Wang <b18965@freescale.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Simon Glass <sjg@chromium.org> Cc: York Sun <york.sun@nxp.com> Cc: Shengzhou Liu <Shengzhou.Liu@nxp.com> Cc: Mingkai Hu <mingkai.hu@nxp.com> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Cc: Aneesh Bansal <aneesh.bansal@freescale.com> Cc: Saksham Jain <saksham.jain@nxp.com> Cc: Qianyu Gong <qianyu.gong@nxp.com> Cc: Wang Dongsheng <dongsheng.wang@nxp.com> Cc: Alex Porosanu <alexandru.porosanu@freescale.com> Cc: Hongbo Zhang <hongbo.zhang@nxp.com> Cc: tang yuantian <Yuantian.Tang@freescale.com> Cc: Rajesh Bhagat <rajesh.bhagat@nxp.com> Cc: Josh Wu <josh.wu@atmel.com> Cc: Bo Shen <voice.shen@atmel.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Hannes Schmelzer <oe5hpm@oevsv.at> Cc: Thomas Chou <thomas@wytron.com.tw> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Christophe Ricard <christophe-h.ricard@st.com> Cc: Anand Moon <linux.amoon@gmail.com> Cc: Beniamino Galvani <b.galvani@gmail.com> Cc: Carlo Caione <carlo@endlessm.com> Cc: huang lin <hl@rock-chips.com> Cc: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Cc: Xu Ziyuan <xzy.xu@rock-chips.com> Cc: "jk.kernel@gmail.com" <jk.kernel@gmail.com> Cc: "Ariel D'Alessandro" <ariel@vanguardiasur.com.ar> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Samuel Egli <samuel.egli@siemens.com> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Siarhei Siamashka <siarhei.siamashka@gmail.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Bernhard Nortmann <bernhard.nortmann@web.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Ben Whitten <ben.whitten@gmail.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Alexander Graf <agraf@suse.de> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Vitaly Andrianov <vitalya@ti.com> Cc: "Andrew F. Davis" <afd@ti.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Carlos Hernandez <ceh@ti.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Ash Charles <ashcharles@gmail.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Daniel Allred <d-allred@ti.com> Cc: Gong Qianyu <Qianyu.Gong@freescale.com> Signed-off-by: NTom Rini <trini@konsulko.com> Acked-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NChin Liang See <clsee@altera.com> Tested-by: NStephen Warren <swarren@nvidia.com> Acked-by: NPaul Kocialkowski <contact@paulk.fr>
-
- 20 8月, 2016 1 次提交
-
-
由 Masahiro Yamada 提交于
This command is used to boot ARM64 Linux. I made DISTRO_DEFAULTS select this option for ARM64 to respect include/config_distro_defaults.h. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-