- 06 10月, 2020 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 27 8月, 2020 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 24 8月, 2020 2 次提交
-
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_SYS_DEVICE_NULLDEV Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This converts the following to Kconfig: CONFIG_SPLASH_SCREEN CONFIG_SPLASH_SCREEN_ALIGN CONFIG_SPLASHIMAGE_GUARD CONFIG_SPLASH_SOURCE Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 08 8月, 2020 1 次提交
-
-
由 Tom Rini 提交于
This converts the following to Kconfig: CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Note that with this conversion we now have consistent behavior with respect to ensuring that we have always selected the correct MMC device and hardware partition. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 07 8月, 2020 3 次提交
-
-
由 Ovidiu Panait 提交于
Remove ad-hoc CONFIG_SYS_SRAM_START and use CONFIG_SYS_SRAM_BASE instead. Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NOvidiu Panait <ovidiu.panait@windriver.com>
-
由 Ovidiu Panait 提交于
This converts ad-hoc CONFIG_SYS_SRAM_SIZE to Kconfig. Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NOvidiu Panait <ovidiu.panait@windriver.com>
-
由 Ovidiu Panait 提交于
This converts ad-hoc CONFIG_SYS_SRAM_BASE to Kconfig. Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NOvidiu Panait <ovidiu.panait@windriver.com>
-
- 29 7月, 2020 8 次提交
-
-
由 Peng Fan 提交于
Done with: ./tools/moveconfig.py -S SPL_LOAD_FIT_ADDRESS ./tools/moveconfig.py -S SPL_LOAD_FIT_ADDRESS -H Signed-off-by: NPeng Fan <peng.fan@nxp.com> [trini: A few more migrations] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_SYS_MMCSD_FS_BOOT_PARTITION Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
BOOTP_DEFAULT is defined in several boards, but this config option is never checked or used. This patch removes this config option from config files and the whitelist.txt Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_BOOTP_SEND_HOSTNAME Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_DRIVER_TI_EMAC_USE_RMII Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_SPL_NAND_BASE CONFIG_SPL_NAND_IDENT Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_SPL_NAND_DRIVERS CONFIG_SPL_NAND_ECC CONFIG_SPL_NAND_SIMPLE Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Adam Ford 提交于
This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: NAdam Ford <aford173@gmail.com> [trini: Rerun migration, remove some comments] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 28 7月, 2020 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 27 7月, 2020 1 次提交
-
-
由 Yangbo Lu 提交于
The eSDHC adapter card identification and multiplexing configuration through FPGA had been implemented in both common mmc driver and fsl_esdhc driver. However it is proper to move these code to board files and do it during board initialization. The FPGA registers are also board specific. This patch is to move eSDHC adapter card identification and multiplexing configuration from mmc driver to specific board files. And the option CONFIG_FSL_ESDHC_ADAPTER_IDENT is no longer needed. Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com> [Rebased, Removed T1040QDS change as board does not exist] Signed-off-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
- 25 7月, 2020 1 次提交
-
-
由 Marek Vasut 提交于
Add Kconfig entries for the dc2114x driver and convert various boards. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
-
- 18 7月, 2020 1 次提交
-
-
由 Aaron Williams 提交于
This patch adds very basic support for the Octeon III SoCs. Only CFI parallel NOR flash and UART is supported for now. Please note that the basic Octeon port does not include the DDR3/4 initialization yet. This will be added in some follow-up patches later. To still use U-Boot on with this port, the L2 cache (4MiB on Octeon III CN73xx) is used as RAM. This way, U-Boot can boot to the prompt on such boards. Signed-off-by: NAaron Williams <awilliams@marvell.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 17 7月, 2020 2 次提交
-
-
由 Michal Simek 提交于
All configurations have been removed in 2016 by commit 7985cdf7 ("arm64: Remove non-full-va map code"). Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Patrick Delaunay 提交于
This converts the following to Kconfig: CONFIG_ARMV7_PSCI_1_0 CONFIG_ARMV7_PSCI_0_2 Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com>
-
- 13 7月, 2020 1 次提交
-
-
由 Adam Ford 提交于
There are two options that are currently whitelisted, but they are redundant, because there are not necessary since Kconfig options exist to basically state the same thing. CONFIG_DIRECT_NOR_BOOT and CONFIG_USE_NOR are both set together and only used by the da850 when booting from NOR, however the only time CONFIG_MTD_NOR_FLASH is configured is when booting from NOR. Since NOR doesn't need SPL, the options for SPL can be moved to a check for building SPL instead of checking for NOR. This patch removes the checks for these two config options and unifies the checks around the Kconfig option of CONFIG_MTD_NOR_FLASH. Since this board is the only board that uses these two config options, they can be removed from the whitelist table. Signed-off-by: NAdam Ford <aford173@gmail.com>
-
- 11 7月, 2020 1 次提交
-
-
由 Marek Szyprowski 提交于
Move ADDR_MAP related config options from include/configs/*.h to the proper place in lib/Kconfig. This has been done using ./tools/moveconfig.py and manual inspection of the generated changes. This is a preparation to use ADDR_MAP helper on ARM 32bit Raspberry Pi4 board for mapping the PCIe XHCI MMIO, which is above the 4GiB identity mapping limit. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 10 7月, 2020 1 次提交
-
-
由 Bhargav Shah 提交于
Drop the nondm code from kirkwood_spi.c since there is no board or any other code using for it. Signed-off-by: NBhargav Shah <bhargavshah1988@gmail.com> Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
-
- 09 7月, 2020 2 次提交
-
-
由 Jagan Teki 提交于
OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Drop it. Cc: Ash Charles <ash@gumstix.com> Cc: Steve Sakoman <sakoman@gmail.com> Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
-
由 Rasmus Villemoes 提交于
U-Boot does not have loadable modules, and nothing currently uses any of the (CONFIG_)?IS_(BUILTIN|MODULE) macros - only the (CONFIG_)?IS_ENABLED variants are ever used. While I understand the desire to keep this somewhat synchronized with linux, we've already departed by the introduction of the CONFIG_IS_ENABLED extra logic, and deleting these makes the next patch much simpler, since I won't have to duplicate a lot of logic for no real gain (as there are no users). Signed-off-by: NRasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: NSimon Glass <sjg@chromium.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 30 6月, 2020 1 次提交
-
-
由 Marcel Ziswiler 提交于
Move CONFIG_PXA_MMC_GENERIC to Kconfig. Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 24 6月, 2020 1 次提交
-
-
由 Ashok Reddy Soma 提交于
Remove below config options and convert them to macros. They have never been configured to different values than default one. And also it makes sense to reduce the config_whitelist. CONFIG_SYS_ZYNQ_SPI_WAIT CONFIG_SYS_ZYNQ_QSPI_WAIT CONFIG_XILINX_SPI_IDLE_VAL Signed-off-by: NAshok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
- 23 6月, 2020 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 19 6月, 2020 2 次提交
-
-
由 Marek Vasut 提交于
Add Kconfig entries for the eepro100 driver and convert various boards. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
-
由 Marek Vasut 提交于
This code is never enabled, last board that used it was ELPPC which was removed some 5 years ago, so just remove this code altogether. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
-
- 11 6月, 2020 1 次提交
-
-
由 Jagan Teki 提交于
Drop CONFIG_SYS_SPI_WRITE_TOUT there is no code usage. Cc: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
-
- 05 6月, 2020 1 次提交
-
-
由 Tom Rini 提交于
The symbol "CONFIG_ARM_DCC" is used to control building drivers/serial/arm_dcc.c. Provide a simple Kconfig entry for this. Cc: Luca Ceresoli <luca@lucaceresoli.net> Cc: Michal Simek <monstr@monstr.eu> Cc: Tom McLeod <tom.mcleod@opalkelly.com> Cc: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NLuca Ceresoli <luca@lucaceresoli.net>
-
- 26 5月, 2020 1 次提交
-
-
由 Tom Rini 提交于
Rsync all defconfig files using moveconfig.py Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 25 5月, 2020 2 次提交
-
-
由 Michael Walle 提交于
Move the CONFIG_GZIP_COMPRESSED from a config.h macro to a Kconfig menu item. It is not selectable by a user because there is no reason to do so. Instead it will be automatically selected by the stuff which uses gzip(), like the zip command. Remove it from the config_whitelist.txt. Also remove CONFIG_GZIP_COMPRESS_DEF_SZ as this was never used on any board. The default seems to be sane, otherwise it should be added as a Kconfig option. Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Marek Vasut 提交于
Convert ENV_ACCESS_IGNORE_FORCE to Kconfig, no functional change. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com>
-
- 23 5月, 2020 1 次提交
-
-
由 Marek Vasut 提交于
Convert CONFIG_KS8851_MLL and CONFIG_KS8851_MLL_BASEADDR to Kconfig Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
-
- 20 5月, 2020 1 次提交
-
-
由 Heiko Schocher 提交于
the mpc83xxx suvd3 variant is not longer used, so remove it. Signed-off-by: NHolger Brunck <holger.brunck@ch.abb.com> Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>
-
- 16 5月, 2020 1 次提交
-
-
由 Ovidiu Panait 提交于
This converts ad-hoc CONFIG_DELAY_ENVIRONMENT to Kconfig. Signed-off-by: NOvidiu Panait <ovidiu.panait@windriver.com>
-