- 09 8月, 2017 1 次提交
-
-
由 Adam Ford 提交于
The driver is for all boards 24XX and up, so let's eliminate the extra option called CONFIG_SYS_I2C_OMAP34XX since the driver checks for CONFIG_OMAP34XX we don't need CONFIG_SYS_I2C_OMAP34XX. Signed-off-by: NAdam Ford <aford173@gmail.com> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
- 15 5月, 2017 1 次提交
-
-
由 Masahiro Yamada 提交于
Now CONFIG_GENERIC_MMC and CONFIG_MMC match for all defconfig. We do not need two options for the same feature. Deprecate the former. This commit was generated with the sed script 's/GENERIC_MMC/MMC/' and manual fixup of drivers/mmc/Kconfig. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 20 3月, 2017 1 次提交
-
-
由 Jean-Jacques Hiblot 提交于
To keep a consistent MMC device mapping in SPL and in u-boot, let's register the MMC controllers the same way in u-boot and in the SPL. In terms of boot time, it doesn't hurt to register more controllers than needed because the MMC device is initialized only prior being accessed for the first time. Having the same device mapping in SPL and u-boot allows us to use the environment in SPL whatever the MMC boot device. Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com>
-
- 23 10月, 2015 1 次提交
-
-
由 Paul Kocialkowski 提交于
This introduces omap_die_id_display to display the full die id. There is no need to store it in an environment variable, that no boot script is using anyway. Signed-off-by: NPaul Kocialkowski <contact@paulk.fr> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 13 11月, 2013 1 次提交
-
-
由 Heiko Schocher 提交于
- add omap24xx driver to new multibus/multiadpater support - adapted all config files, which uses this driver Tested on the am335x based siemens boards rut, dxr2 and pxm2 posted here: http://patchwork.ozlabs.org/patch/263211/Signed-off-by: NHeiko Schocher <hs@denx.de> Tested-by: NTom Rini <trini@ti.com> Cc: Lars Poeschel <poeschel@lemonage.de> Cc: Steve Sakoman <sakoman@gmail.com> Cc: Thomas Weber <weber@corscience.de> Cc: Tom Rix <Tom.Rix@windriver.com> Cc: Grazvydas Ignotas <notasas@gmail.com> Cc: Enric Balletbo i Serra <eballetbo@iseebcn.com> Cc: Luca Ceresoli <luca.ceresoli@comelit.it> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Ilya Yanok <yanok@emcraft.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Nishanth Menon <nm@ti.com> Cc: Pali Rohár <pali.rohar@gmail.com> Cc: Peter Barada <peter.barada@logicpd.com> Cc: Nagendra T S <nagendra@mistralsolutions.com> Cc: Michael Jones <michael.jones@matrix-vision.de> Cc: Raphael Assenat <raph@8d.com> Acked-by: NIgor Grinberg <grinberg@compulab.co.il> Acked-by: NStefano Babic <sbabic@denx.de>
-
- 24 7月, 2013 1 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: NTom Rini <trini@ti.com>
-
- 09 3月, 2013 2 次提交
-
-
由 Nikita Kiryanov 提交于
Add check for write protection in omap mmc driver. Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il> Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il> Reviewed-by: NTom Rini <trini@ti.com>
-
由 Nikita Kiryanov 提交于
Implement driver check for card detection. Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il> Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
-
- 15 5月, 2012 1 次提交
-
-
由 Jonathan Solnit 提交于
Add parameters to the OMAP MMC initialization function so the board can mask host capabilities and set the maximum clock frequency. While the OMAP supports a certain set of MMC host capabilities, individual boards may be more restricted and the OMAP may need to be configured to match the board. The PRG_SDMMC1_SPEEDCTRL bit in the OMAP3 is an example. Signed-off-by: NJonathan Solnit <jsolnit@gmail.com>
-
- 07 12月, 2011 1 次提交
-
-
由 Tom Rini 提交于
The only change of note is that we move from 0x80008000 to 0x80100000 for CONFIG_SYS_TEXT_BASE Cc: Nagendra T S <nagendra@mistralsolutions.com> Tested-by: NKoen Kooi <k-kooi@ti.com> Signed-off-by: NTom Rini <trini@ti.com>
-
- 04 9月, 2011 1 次提交
-
-
由 Tom Rini 提交于
Switch from the legacy omap3 mmc driver to the new generic omap hsmmc driver. This patch is based on the work done for Beagle, etc. Signed-off-by: NTom Rini <trini@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
- 28 4月, 2011 1 次提交
-
-
由 Srinath 提交于
It is a low cost reference design based on Sitara AM3517 SoC from Texas Instruments Please refer to <www.craneboard.org> for more details. Signed-off-by: NSrinath <srinath@mistralsolutions.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
- 08 6月, 2010 2 次提交
-
-
由 Vaibhav Hiremath 提交于
This patch adds basic support for the AM3517EVM. It includes: - Board files (.c and .h) - Default configuration file - Updates for Makefile Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: NSanjeev Premi <premi@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Vaibhav Hiremath 提交于
This patch adds basic support for the AM3517EVM. It includes: - Board files (.c and .h) - Default configuration file - Updates for Makefile Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: NSanjeev Premi <premi@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-