- 08 10月, 2019 25 次提交
-
-
由 Troy Kisky 提交于
Add CONFIG_DM_SPI/CONFIG_DM_SPI_FLASH to all defconfigs whose board is nitrogen6x. mx6qsabrelite_defconfig nitrogen6dl2g_defconfig nitrogen6dl_defconfig nitrogen6q2g_defconfig nitrogen6q_defconfig nitrogen6s1g_defconfig Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
-
由 Troy Kisky 提交于
Add CONFIG_DM_GPIO to all defconfigs whose board is nitrogen6x. mx6qsabrelite_defconfig nitrogen6dl2g_defconfig nitrogen6dl_defconfig nitrogen6q2g_defconfig nitrogen6q_defconfig nitrogen6s1g_defconfig This is in preparation for adding CONFIG_DM_SPI. Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
-
由 Troy Kisky 提交于
This prevents messages like gpio@20a0000: get_value: error: gpio GPIO2_2 not reserved when CONFIG_DM_GPIO is enabled. Also, when CONFIG_DM_GPIO is enabled, checkboard is too early to use gpio_get_value, so read it directly on failure. Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
-
由 Troy Kisky 提交于
Add DM_MMC to all defconfigs whose board is nitrogen6x. mx6qsabrelite_defconfig nitrogen6dl2g_defconfig nitrogen6dl_defconfig nitrogen6q2g_defconfig nitrogen6q_defconfig nitrogen6s1g_defconfig This commit is adding multiple configs, but seems to be the minimum change to not lose features and still compile fine. Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
-
由 Troy Kisky 提交于
Migrate to using device tree required for further driver model integration. Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com>
-
由 Robert Hancock 提交于
Previously the SPL size on all iMX6 platforms was restricted to 68KB because the OCRAM size on iMX6SL/DL parts is only 128KB. However, the other iMX6 variants have 256KB of OCRAM. Add an option CONFIG_MX6_OCRAM_256KB which allows using the full size on boards which don't need to support the SL/DL variants. This allows for an SPL size of 196KB, which makes it much easier to use configurations such as SPL with driver model and FDT control. Signed-off-by: NRobert Hancock <hancock@sedsystems.ca> Tested-by: Adam Ford <aford173@gmail.com> #imx6q_logic
-
由 Ricardo Salveti 提交于
There is no need to use HAB for FIT signature validation when SPL_FIT_SIGNATURE is also enabled, as that will be validated via the normal U-Boot signed FIT image flow. This allows having SPL validated by HAB and the payloads to follow being validated with FIT signatures only. Signed-off-by: NRicardo Salveti <ricardo@foundries.io> Reviewed-by: NPeng Fan <peng.fan@nxp.com>
-
由 Ricardo Salveti 提交于
Toradex Apalis iMX6 modules are available in the iMX6D and iMX6Q variants, which are quite similar and already managed via only one dtb in u-boot (imx6-apalis.dtb). Select MX6Q via Kconfig by default in order to automatically enable the HAS_CAAM and MX6_SMP features. Signed-off-by: NRicardo Salveti <ricardo@foundries.io> Reviewed-by: NPeng Fan <peng.fan@nxp.com> Acked-by: NMax Krummenacher <max.krummenacher@toradex.com>
-
由 Ricardo Salveti 提交于
Commit e37ac717 ("Convert to use fsl_esdhc_imx for i.MX platforms") converted FSL_ESDHC to FSL_ESDHC_IMX, but the config check for apalis_imx6 wasn't updated accordantly. Signed-off-by: NRicardo Salveti <ricardo@foundries.io> Reviewed-by: NPeng Fan <peng.fan@nxp.com> Acked-by: NMax Krummenacher <max.krummenacher@toradex.com>
-
由 Ricardo Salveti 提交于
Only one dtb is currently supported, so match with imx6-apalis. Signed-off-by: NRicardo Salveti <ricardo@foundries.io> Reviewed-by: NPeng Fan <peng.fan@nxp.com> Acked-by: NMax Krummenacher <max.krummenacher@toradex.com>
-
由 Peng Fan 提交于
The gpio command currently uses equal bank names "GPIO0_" for all existing gpio banks, i. e.: U-Boot# gpio status -a Bank GPIO0_: GPIO0_0: input: 0 [ ] GPIO0_1: input: 0 [ ] ... Bank GPIO0_: GPIO0_0: input: 0 [ ] GPIO0_1: input: 0 [ ] ... So the command is broken, it is not possible to address a desired bank. Add gpio aliases to fix this. Signed-off-by: NPeng Fan <peng.fan@nxp.com> Reviewed-by: NAnatolij Gustschin <agust@denx.de>
-
由 Peng Fan 提交于
Pass spl_image and bootdev to board_return_bootrom. i.MX8MN needs the args to let ROM to load images Cc: Simon Glass <sjg@chromium.org> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: NPeng Fan <peng.fan@nxp.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Peng Fan 提交于
i.MX7 and i.MX8M use mxc uart driver, so let's make the SoC could use MXC_UART kconfig. Signed-off-by: NPeng Fan <peng.fan@nxp.com> Reviewed-by: NYe Li <ye.li@nxp.com>
-
由 Peng Fan 提交于
Add missed break for HDMI entry. And moving FIT parsing earlier, because it does not have parameter, it will not runs into CFG_REG_SIZE. Signed-off-by: NPeng Fan <peng.fan@nxp.com> Reviewed-by: NYe Li <ye.li@nxp.com> Reviewed-by: NLukasz Majewski <lukma@denx.de>
-
由 Peng Fan 提交于
fdtdec_get_addr_size could not parse addr/size correctly is using address-cells 2 and size-cells 2 on an ARM32 SoC. So switch to use devfdt_get_addr_size_index. Signed-off-by: NPeng Fan <peng.fan@nxp.com>
-
由 Peng Fan 提交于
With DM_SPI and DM_SPI_FLASH enabled, we could get: spi 0 [ ] mxc_spi | | | `-- ecspi@02008000 spi_flash 0 [ ] spi_flash_std | | | `-- m25p80@0 Signed-off-by: NPeng Fan <peng.fan@nxp.com>
-
由 Peng Fan 提交于
To support DM_VIDEO, Add display node for lcdif Drop board iomuxc settings. Enable DM_VIDEO Signed-off-by: NPeng Fan <peng.fan@nxp.com> Reviewed-by: NAnatolij Gustschin <agust@denx.de>
-
由 Peng Fan 提交于
When booting SPL on the board, met boot failure: " Trying to boot from MMC2 MMC Device 1 not found spl: could not find mmc device 1. error: -19 SPL: failed to boot from all boot devices " Let's register the two mmc controllers in SPL stage to avoid boot failure. Signed-off-by: NPeng Fan <peng.fan@nxp.com> Reviewed-by: NFabio Estevam <festevam@gmail.com>
-
由 Peng Fan 提交于
Add i.MX6ULZ board support. the i.MX6ULZ is SW compatible with i.MX6ULL. so most code of i.MX6ULL can be reused by i.MX6ULZ. Signed-off-by: NPeng Fan <peng.fan@nxp.com> Reviewed-by: NYe Li <ye.li@nxp.com> Reviewed-by: NFabio Estevam <festevam@gmail.com>
-
由 Peng Fan 提交于
Add i.MX6ULZ cpu type and helper. Signed-off-by: NPeng Fan <peng.fan@nxp.com> Reviewed-by: NYe Li <ye.li@nxp.com> Reviewed-by: NFabio Estevam <festevam@gmail.com>
-
由 Peng Fan 提交于
Import kernel dts for i.MX6ULZ from commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux") Signed-off-by: NPeng Fan <peng.fan@nxp.com> Reviewed-by: NYe Li <ye.li@nxp.com> Reviewed-by: NFabio Estevam <festevam@gmail.com>
-
由 Peng Fan 提交于
Sync kernel dts for i.MX6ULL from commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux") Signed-off-by: NPeng Fan <peng.fan@nxp.com> Reviewed-by: NYe Li <ye.li@nxp.com> Reviewed-by: NFabio Estevam <festevam@gmail.com>
-
由 Peng Fan 提交于
Sync kernel dts for i.MX6UL from commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux") Signed-off-by: NPeng Fan <peng.fan@nxp.com> Reviewed-by: NYe Li <ye.li@nxp.com> Reviewed-by: NFabio Estevam <festevam@gmail.com>
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Eugeniy Paltsev 提交于
The commit 642b80d2 ("net: designware: drop compatible altr, socfpga-stmmac") breaks designware ethernet for all ARC boards. It removes "altr, socfpga-stmmac" compatible from "drivers/net/designware.c" without changing compatible in the boards which use it. Fix that by adding "snps,arc-dwmac-3.70a" compatible string to "drivers/net/designware.c" and using it in ARC boards device tree. Signed-off-by: NEugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
-
- 07 10月, 2019 5 次提交
-
-
由 Tom Rini 提交于
- Regression work-around on SoCFPGA by disabling WDT in some cases. - Fix seg fault on 'host info' in some cases.
-
由 AKASHI Takahiro 提交于
With the patch below applied, host_block_dev structure was switched to be placed in platdata rather than priv. The command "host info" must be aligned with this change. Otherwise, we will see "Segmentation Fault." Fixes: 8f994c86 ("sandbox: blk: Switch to use platdata_auto_alloc_size for the driver data") Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Tested-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Maxime Ripard 提交于
I'm not at bootlin anymore, and my mail address doesn't work any longer. Signed-off-by: NMaxime Ripard <mripard@kernel.org>
-
由 Simon Goldschmidt 提交于
These boards don't have a watchdog enabled in SPL, so make sure CONFIG_SPL_WDT is not enabled. Fixes: commit 6874cb72 ("watchdog: Split WDT from SPL_WDT") Signed-off-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
-
由 Heinrich Schuchardt 提交于
%s/plaforms/platforms/g Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
- 06 10月, 2019 1 次提交
-
-
git://git.denx.de/u-boot-sh由 Tom Rini 提交于
- ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator
-
- 05 10月, 2019 9 次提交
-
-
由 Tom Rini 提交于
- Assorted TI platform fixes - Revert the change that broke environment flag validation - Assorted typo fixes - Assorted Kconfig dependency fixes - Other minor bug fixes
-
https://gitlab.denx.de/u-boot/custodians/u-boot-x86由 Tom Rini 提交于
- dm: core: Correct low cell in ofnode_read_pci_addr() - dm: core: Correct bad cast in ofnode_get_addr_size_index()
-
由 Tom Rini 提交于
This reverts commit 7d477654. The changes here break environment validation and furthermore do not seem to be required. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Adam Ford 提交于
The SPL device tree is missing the entires for gpio1, uart1, usdhc1 and usdhc2. This creates the missing imx6q-logicpd-u-boot.dtsi file which will enable these functions so SPL can properly setup UART, detect microSD card, and startup. Fixes: 8f4691e3 ("ARM: imx6q_logic: With SPL_OF_CONTROL enabled, remove MMC init") Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Ovidiu Panait 提交于
Existing debug output is mixed with the function name: initcall_run_list() initcall: 25263initcall_run_list() (relocated to 425263) Turn it to: initcall_run_list() initcall: 25263 (relocated to 425263) Signed-off-by: NOvidiu Panait <ovpanait@gmail.com>
-
由 Andrius Štikonas 提交于
Signed-off-by: NAndrius Štikonas <andrius@stikonas.eu>
-
由 Tom Rini 提交于
Migrate all of the existing OS support options that are under CONFIG_BOOTM_* to Kconfig. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Roman Stratiienko 提交于
At this point we are using part number sub-command to retrieve UUID of the partition using it's name. e.g.: part number mmc $mmcdev system_a system_a_index part uuid mmc $mmcdev:${system_a_index} system_a_uuid Since 'part uuid' sub-command expects partition index in hex format and 'part number' returns decimal value, 'part uuid' command will provide wrong UUID or fail. Fixes: be683756 ("cmd: part: Add 'number' sub-command") Cc: Dirk Behme <dirk.behme@de.bosch.com> Reported-by: NPontus Fuchs <pontus.fuchs@se.bosch.com> Signed-off-by: NRoman Stratiienko <roman.stratiienko@globallogic.com> Signed-off-by: NEugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NIgor Opaniuk <igor.opaniuk@gmail.com>
-
由 Jean-Jacques Hiblot 提交于
To accommodate the growth of u-boot, we need to shift the location of the secure monitor. Moving it 64kB further. Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com>
-