- 05 9月, 2014 14 次提交
-
-
由 Przemyslaw Marczak 提交于
This patch changes MPLL from 800MHz to 880MHz on Odroid. Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Masahiro Yamada 提交于
Inderpal's email address is not working any more. Chander will be a new maintainer. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Chander Kashyap <k.chander@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Przemyslaw Marczak 提交于
This config is valid for two devices: - Odroid X2, - Odroid U3. Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Tom Rini <trini@ti.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Przemyslaw Marczak 提交于
This is a standard description for Odroid boards. Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Tom Rini <trini@ti.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Przemyslaw Marczak 提交于
This board file supports standard features of Odroid X2 and U3 boards: - Exynos4412 core clock set to 1000MHz and MPLL peripherial clock set to 800MHz, - MAX77686 power regulator, - USB PHY, - enable XCL205 - power for board peripherials - check board type: U3 or X2. - enable Odroid U3 FAN cooler Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Tom Rini <trini@ti.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Przemyslaw Marczak 提交于
This change adds setup of environmental board info using get_board_name() and get_board_type() functions for config CONFIG_BOARD_TYPES. This is useful in case of running many boards with just one config. Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Przemyslaw Marczak 提交于
This change adds declaration of functions: - set_board_type() - called at board_early_init_f() - get_board_type() - called at checkboard() For supporting multiple board types in a one config - it is welcome to display the current board model. This is what get_board_type() should return. Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Przemyslaw Marczak 提交于
On an Odroid U3 board, the SOC is unable to reset the eMMC card in the DWMMC mode by the cpu software reset. Manual reset of the card by switching proper gpio pin - fixes this issue. Such solution needs to add a call to pre reset function. This is done by the reset_misc() function, which is called before reset_cpu(). The function reset_misc() is a weak function. Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Changes v4: - arch/arm/reset: fix weak function attribute to proper style Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Przemyslaw Marczak 提交于
This change enable automatic setting of dfu alt info on every boot. This is useful in case of booting one u-boot binary from multiple media. Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Przemyslaw Marczak 提交于
This change introduces new common function: - set_dfu_alt_info() - put dfu system and bootloader setting into $dfu_alt_info. functions declaration: - char *get_dfu_alt_system(void) - char *get_dfu_alt_boot(void) - void set_dfu_alt_info(void) and new config: - CONFIG_SET_DFU_ALT_INFO This function can be used for auto setting dfu configuration on boot. Such feature is useful for multi board support by one u-boot binary. Each board should define two functions: - get_dfu_alt_system() - get_dfu_alt_boot() Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Przemyslaw Marczak 提交于
It is possible to boot device using a micro SD or eMMC slots. In this situation, boot device should be registered as a block device 0 in the MMC framework, because CONFIG_SYS_MMC_ENV_DEV is usually set to "0" in the most config cases. Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Przemyslaw Marczak 提交于
This patch introduces code clean-up for exynos boot mode check. It includes: - removal of typedef: boot_mode - move the boot mode enum to arch-exynos/power.h - add bootmode for sequence: eMMC 4.4 ch4 / SD ch2 - add new function: get_boot_mode() for OM[5:1] pin check - update spl boot code Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com> Changes v5: - exynos: boot mode: add missing bootmode (1st:EMMC 4.4 / 2nd:SD ch2) Changes v6: - none changes v7: - change boot mode name: BOOT_MODE_MMC to BOOT_MODE_SD Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Przemyslaw Marczak 提交于
This change fixes the bad gpio configuration for the exynos dwmmc. Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com> Cc: Beomho Seo <beomho.seo@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Przemyslaw Marczak 提交于
The byte order of soc revision was inverted, now it is fixed. Signed-off-by: NPrzemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com>
-
- 03 9月, 2014 3 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@ti.com>
-
-
-
- 02 9月, 2014 7 次提交
-
-
由 Bo Shen 提交于
When enable debug option to compile, it will give the following warning, this patch is used to get rid of it. --->8--- warning: 'flags' is used uninitialized in this function [-Wuninitialized] ---8<--- Signed-off-by: NBo Shen <voice.shen@atmel.com>
-
由 Bo Shen 提交于
When enable debug option to compile, it will give the following warning, this patch is used to get rid of it. --->8--- warning: 'flags' is used uninitialized in this function [-Wuninitialized] ---8<--- Signed-off-by: NBo Shen <voice.shen@atmel.com>
-
由 Stephen Warren 提交于
This allows the USB code to determine whether a USB bus reset was issued, which in turn allows the code to differentiate between a detach (return to shell prompt) and a board reset/reboot request. Signed-off-by: NStephen Warren <swarren@nvidia.com>
-
由 Lukasz Majewski 提交于
New dfu_usb_get_reset() method is necessary to distinct two different use cases of dfu-util program. This method checks if the USB bus reset has been really performed after DFU DETACH. Without this function the previous DFU behavior is preserved. Signed-off-by: NLukasz Majewski <l.majewski@samsung.com>
-
由 Lukasz Majewski 提交于
This commit provides distinction between DFU device detach and reset. The -R behavior is preserved with proper handling of the dfu-util's -e switch, which detach the DFU device. By running dfu-util -e; one can force device to finish the execution of dfu command on target and execute some other scripted commands. Moreover, some naming has been changed - the dfu_reset() method now is known as dfu_detach(). New name better reflects the purpose of the code. It was also necessary to increase the number of usb_gadget_handle_interrupts() calls since we also must wait for detection of the USB reset event. Example usage: 1. -e (detach) switch dfu-util -a0 -D file1.bin;dfu-util -a3 -D uImage;dfu-util -e access to u-boot prompt. 2. -R (reset) switch dfu-util -a0 -D file1.bin;dfu-util -R -a3 -D uImage target board reset Signed-off-by: NLukasz Majewski <l.majewski@samsung.com> Reviewed-by: NStephen Warren <swarren@nvidia.com> Tested-by: NStephen Warren <swarren@nvidia.com>
-
-
由 Vasili Galka 提交于
Some drivers (e.g. net/e1000) reference these functions. So, this fixes the build of MVBC_P board. I'm not familiar with the MPC5xxx platform, maybe a full implementation shall be implemented instead of this stub in the future. Signed-off-by: NVasili Galka <vvv444@gmail.com> Cc: Wolfgang Denk <wd@denx.de>, Marek Vasut <marex@denx.de> Acked-by: NWolfgang Denk <wd@denx.de>
-
- 01 9月, 2014 4 次提交
-
-
由 Simon Glass 提交于
Add a bank of GPIOs for sandbox which can be used for testing this functionality. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
The gpio command mostly relies on gpio_request() and gpio_free() being nops, in that you can request a GPIO twice. With driver model this is now implemented correctly, so it fails. Change the command to deal with a failure to claim the GPIO. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
The GPIO list is very long in many cases and most of them are not used. By default, show only the GPIOs that are in use, and provide a flag to show all of them. This makes the 'gpio status' command much more pleasant. In order to do this, driver model now exposes a method for obtaining the 'function' of a GPIO, which describes whether it is an input or output, for example. Implementation of this method is optional. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
The QS Systems TQMa6 board support was added by commit cb07d74e and lost by commit e82abaeb. Commit e82abaeb merged the IMX branch based on pre-Kconfig and the mainline based on post-Kconfig, simply deleting the boards.cfg file. As a result, some boards added just before the merge were lost. This commit adds Kconfig, defconfig, MAINTAINERS for TQMa6 board to work on the Kconfig infrastructure. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Cc: Stefano Babic <sbabic@denx.de>
-
- 31 8月, 2014 12 次提交
-
-
-
由 Masahiro Yamada 提交于
Becuase the board select menu in arch/arm/Kconfig is too big, move the Nomadik board select menu to nomadik/Kconfig. Move also common settings (CONFIG_SYS_CPU="arm926ejs" and CONFIG_SYS_SOC="nomadik"). Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Move Highbank-specific settings to highbank/Kconfig. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Rob Herring <robh@kernel.org>
-
由 Masahiro Yamada 提交于
Becuase the board select menu in arch/arm/Kconfig is too big, move the Orion5x board select menu to orion5x/Kconfig. Move also common settings (CONFIG_SYS_CPU="arm926ejs" and CONFIG_SYS_SOC="orion5x"). Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
-
由 Masahiro Yamada 提交于
Becuase the board select menu in arch/arm/Kconfig is too big, move the Keystone board select menu to keystone/Kconfig. Move also common settings (CONFIG_SYS_CPU="armv7" and CONFIG_SYS_SOC="keystone"). Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: NTom Rini <trini@ti.com> Cc: Vitaly Andrianov <vitalya@ti.com>
-
由 Masahiro Yamada 提交于
Becuase the board select menu in arch/arm/Kconfig is too big, move the OMAP5 board select menu to omap5/Kconfig. Move also common settings (CONFIG_SYS_CPU="armv7" and CONFIG_SYS_SOC="omap5"). Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: NTom Rini <trini@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com>
-
由 Masahiro Yamada 提交于
Becuase the board select menu in arch/arm/Kconfig is too big, move the OMAP4 board select menu to omap4/Kconfig. Move also common settings (CONFIG_SYS_CPU="armv7" and CONFIG_SYS_SOC="omap4"). Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: NTom Rini <trini@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com>
-
由 Masahiro Yamada 提交于
Becuase the board select menu in arch/arm/Kconfig is too big, move the OMAP3 board select menu to omap3/Kconfig. Move also common settings (CONFIG_SYS_CPU="armv7" and CONFIG_SYS_SOC="omap3 Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: NTom Rini <trini@ti.com>
-
由 Masahiro Yamada 提交于
Becuase the board select menu in arch/arm/Kconfig is too big, move the Davinci board select menu to davinci/Kconfig. Move also common settings (CONFIG_SYS_CPU="arm926ejs" and CONFIG_SYS_SOC="davinci"). Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: NTom Rini <trini@ti.com> Cc: Heiko Schocher <hs@denx.de> Cc: Sandeep Paulraj <s-paulraj@ti.com>
-
由 Masahiro Yamada 提交于
Becuase the board select menu in arch/arm/Kconfig is too big, move the Exynos board select menu to exynos/Kconfig. Consolidate also common settings (CONFIG_SYS_CPU="armv7" and CONFIG_SYS_SOC="exynos"). Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NMinkyu Kang <mk7.kang@samsung.com>
-
由 Masahiro Yamada 提交于
Becuase the board select menu in arch/arm/Kconfig is too big, move the KirkWood board select menu to kirkwood/Kconfig. Consolidate also common settings (CONFIG_SYS_CPU="arm926ejs" and CONFIG_SYS_SOC="kirkwood"). Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NPrafulla Wadasdkar <prafulla@marvell.com> Cc: Luka Perkov <luka@openwrt.org>
-
由 Masahiro Yamada 提交于
Move Versatile-specific settings to versatile/Kconfig. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-