- 28 4月, 2011 40 次提交
-
-
由 Kim Phillips 提交于
commit 560d424b "env: re-add support for auto-completion" fell short of its description - the 'used' logic in hmatch_r was reversed - 'used' is 0 if the hash table entry is not used, or -1 if deleted. This patch makes hmatch_r actually match on valid ('used') entries, instead of skipping them and failing to match anything. typing 'printenv tft' and hitting 'tab' now displays valid choices for variable names. Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Cc: Mike Frysinger <vapier@gentoo.org> Tested-by: NMike Frysinger <vapier@gentoo.org>
-
由 Heiko Schocher 提交于
call flash_protect_default() to protect default sectors. Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
- rev5 board has phy addr 1 -> adapt CONFIG_PHY_ADDR define in board config file. - also fixup the phy addr entry in dts, before booting Linux. Signed-off-by: NHeiko Schocher <hs@denx.de> Acked-by: NDetlev Zundel <dzu@denx.de>
-
由 Gray Remlin 提交于
If neither CONFIG_CMD_PING or CONFIG_CMD_SNTP are defined but CONFIG_CMD_DNS is, a compile-time error will occur due to the absence of a goto label. Signed-off-by: NGray Remlin <gryrmln@gmail.com>
-
由 thomas.langer@lantiq.com 提交于
This patch fixes problems in the handling of redundant environment in env_sf.c The major problem are double calls of free() on the allocated buffers, which damages the internal data of malloc and crashes on next call. In addition, the selection of the active environment had errors and compiler warnings, which are corrected by this patch. Signed-off-by: NThomas Langer <thomas.langer@lantiq.com>
-
-
-
-
-
由 Minkyu Kang 提交于
If FB address is defined specific address then don't grab memory for LCD Signed-off-by: NMinkyu Kang <mk7.kang@samsung.com> Cc: Albert Aribaud <albert.aribaud@free.fr> Cc: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Kumar Gala <kumar.gala@freescale.com>
-
由 Alessandro Rubini 提交于
Signed-off-by: NAlessandro Rubini <rubini@unipv.it> Acked-by: NAndrea Gallo <andrea.gallo@stericsson.com>
-
由 Alessandro Rubini 提交于
This patch defines all the needed symbols in the header file and removes the now-unused config.mk in board directory. Changes to board C file as requested. Signed-off-by: NAlessandro Rubini <rubini@gnudd.com> Signed-off-by: NAlessandro Rubini <rubini@unipv.it> Acked-by: NAndrea Gallo <andrea.gallo@stericsson.com>
-
由 Alessandro Rubini 提交于
This source file, which I got by the vendor in their own port, was not actually executing because lib-based compilation didn't call lowlevel_init (we have CONFIG_SKIP_LOWLEVEL_INIT). With the change to object-based linking, an undefined symbol in this file started hitting in the final link. Signed-off-by: NAlessandro Rubini <rubini@unipv.it> Acked-by: NAndrea Gallo <andrea.gallo@stericsson.com>
-
由 Eric Benard 提交于
- fix board support following relocation changes - switch to boards.cfg - disable i2c to keep size under 128kiB (1 sector) Signed-off-by: NEric Bénard <eric@eukrea.com>
-
由 Macpaul Lin 提交于
Move the header file and definitions of ftsmc020 static memory control unit from a320 SoC folder to "drivers/mtd" folder. This change will let other SoC which also use ftsmc020 could share the same header file. Signed-off-by: NMacpaul Lin <macpaul@andestech.com>
-
由 Macpaul Lin 提交于
Move the header file "ftsdmc020.h" (SDRAM Controller) to "include/faraday" folder. This change will let other SoC which also use ftsdmc020 could share the same header file. Signed-off-by: NMacpaul Lin <macpaul@andestech.com>
-
由 Eric Benard 提交于
- update to new relocation code - switch to boards.cfg - get rid of LEGACY (still a little hack in .h to compile) - add nand boot configuration - boot tested for the following configurations : 9260 (64MB RAM & nor boot) 9260_nand (64MB RAM & nand boot) 9G20_128M (128MB RAM & nor boot) 9G20_nand_128M (128MB RAM & nand boot) (nor boot is using lowlevel init) Signed-off-by: NEric Bénard <eric@eukrea.com>
-
由 Sughosh Ganu 提交于
Fix the nand_spl build for the hawkboard Signed-off-by: NSughosh Ganu <urwithsughosh@gmail.com>
-
由 Luca Ceresoli 提交于
Board support for the DIG297 board manufactured by Comelit Group SpA. It is a custom board based on the BeagleBoard <http://beagleboard.org/> by Texas Instruments. The board support is based on the BeagleBoard implementation. Signed-off-by: NLuca Ceresoli <luca.ceresoli@comelit.it> Cc: Wolfgang Denk <wd@denx.de> Cc: Albert Aribaud <albert.aribaud@free.fr> Cc: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Luca Ceresoli 提交于
Removed boot_flash_* extern variables. boot_flash_type was totally unused. The other ones were actually constants, so they have been replaced with #defines in the board config files. Signed-off-by: NLuca Ceresoli <luca.ceresoli@comelit.it> Cc: Wolfgang Denk <wd@denx.de> Cc: Albert Aribaud <albert.aribaud@free.fr> Cc: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Tom Warren 提交于
Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Tom Warren 提交于
Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Tom Warren 提交于
Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Eric Cooper 提交于
Since addr_sp is a byte address, it should be adjusted by 12 here. Signed-off-by: NEric Cooper <ecc@cmu.edu> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: NWolfgang Denk <wd@denx.de>
-
由 Tom Warren 提交于
Signed-off-by: NTom Warren <twarren@nvidia.com>
-
由 Luca Ceresoli 提交于
Signed-off-by: NLuca Ceresoli <luca.ceresoli@comelit.it> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Luca Ceresoli 提交于
CONFIG_OMAP34XX must be checked for existence, not value. Signed-off-by: NLuca Ceresoli <luca.ceresoli@comelit.it> Cc: Wolfgang Denk <wd@denx.de> Cc: Albert Aribaud <albert.aribaud@free.fr> Cc: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Alexander Holler 提交于
The reset sequence/configuration for ehci is highly board specific, so this will be done in the source for the board, instead of introducing several CONFIG_* which would be needed to make those few lines in beagle.c usable across different OMAP boards. Signed-off-by: NAlexander Holler <holler@ahsoftware.de> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Alexander Holler 提交于
Signed-off-by: NAlexander Holler <holler@ahsoftware.de> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Alexander Holler 提交于
Signed-off-by: NAlexander Holler <holler@ahsoftware.de> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Enric Balletbo i Serra 提交于
The default IGEP configuration doesn't do anything useful; using some boot.scr search logic like BeagleBoard is much more useful. Signed-off-by: NEnric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Enric Balletbo i Serra 提交于
configuration The default IGEP configuration doesn't do anything useful; using some boot.scr search logic like BeagleBoard is much more useful. Signed-off-by: NLoïc Minier <loic.minier@linaro.org> Signed-off-by: NEnric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Albert ARIBAUD 提交于
Signed-off-by: NAlbert ARIBAUD <albert.u.boot@aribaud.net>
-
由 Macpaul Lin 提交于
Fix include path of timer fttmr010 in a320evb. Signed-off-by: NMacpaul Lin <macpaul@andestech.com>
-
由 Macpaul Lin 提交于
Move the header file and definitions of fttmr010 power control unit from a320 SoC folder to "include/faraday" folder. This change will let other SoC which also use fttmr010 could share the same header file. Signed-off-by: NMacpaul Lin <macpaul@andestech.com>
-
由 Macpaul Lin 提交于
Add asm support which is ususally used in lowlevel_init to set power related parameters to sdram controller and static memory controller. Signed-off-by: NMacpaul Lin <macpaul@andestech.com>
-
由 Macpaul Lin 提交于
1. ftpmu010.h: fix and add definitions Enhanced for more features and asm related support according to datasheet. Note: - FTPMU010_PDLLCR0_HCLKOUTDIS is "incorrect" in datasheet. - FTPMU010_PDLLCR0_DLLFRANG is only 1 bit at bit #19. (not 20-19) - FTPMU010_PDLLCR0_HCLKOUTDIS is 4 bits at bit #20. (not 24-21) 2. ftpmu010.c: enhance features and fix relocation - The following functions is added for pmu features. ftpmu010_mfpsr_select_dev() ftpmu010_sdramhtc_set() - This patch also fix the declare statement for relocation. Signed-off-by: NMacpaul Lin <macpaul@andestech.com>
-
由 Rogan Dawes 提交于
-
由 Lei Wen 提交于
Add i2c support to aspenite board with Armada100 soc. Acked-by: NHeiko Schocher <hs@denx.de> Acked-by: NPrafulla Wadaskar <prafulla@marvell.com> Signed-off-by: NLei Wen <leiwen@marvell.com>
-
由 Lei Wen 提交于
Add the ability to support multiple i2c bus for mv_i2c Acked-by: NHeiko Schocher <hs@denx.de> Acked-by: NPrafulla Wadaskar <prafulla@marvell.com> Signed-off-by: NLei Wen <leiwen@marvell.com>
-