This reverts commit 39768f77.

Reson: it breaks a number of boards with embedded environment as the
code size grows in some places.

The new mdio command doesn't have all of the features of the mii
command, but it provides the necessary read/write primitives, and allows
users to interact with 10G PHYs, and other PHYs which use Clause 45 of
802.3.  This means that the mdio command requires a "Device Address"
argument, though for clause 22 PHYs, the argument can be "-".
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Acked-by: NDetlev Zundel <dzu@denx.de>

The fsl_phy_enet_if enum was, essentially, the phy_interface_t enum.
This meant that drivers which used fsl_phy_enet_if to deal with
PHY interfaces would have to convert between the two (or we would have
to have them mirror each other, and deal with the ensuing maintenance
headache). Instead, we switch all clients of fsl_phy_enet_if over to
phy_interface_t, which should become the standard, anyway.
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Acked-by: NDetlev Zundel <dzu@denx.de>

This converts tsec to use the new PHY Lib.  All of the old PHY support
is ripped out.  The old MDIO driver is split off, and placed in
fsl_mdio.c.  The initialization is modified to initialize the MDIO
driver as well.  The powerpc config file is modified to configure PHYLIB
if TSEC_ENET is configured.
Signed-off-by: NMingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Acked-by: NDetlev Zundel <dzu@denx.de>

The tsec driver had a bunch of PHY drivers already written. This
converts them all into PHY Lib drivers, and serves as the first
set of PHY drivers for PHY Lib.

While doing that, cleaned up a number of magic numbers (though
not all of them, as PHY vendors like to keep their numbers as
magical as possible).  Also, noticed that almost all of the
vitesse/cicada PHYs had the same config/parse/startup functions,
so those have been collapsed into one.
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Acked-by: NDetlev Zundel <dzu@denx.de>

Extends the mii_dev structure to participate in a full-blown MDIO and
PHY driver scheme.  The mii_dev structure and miiphy calls are modified
in such a way to allow the original mii command and miiphy
infrastructure to work as before, but also to support a new set of APIs
which allow (among other things) sharing of PHY driver code and 10G support

The mii command will continue to support normal PHY management functions
(Clause 22 of 802.3), but will not be changed to support 10G
(Clause 45).

The basic design is similar to PHY Lib from Linux, but simplified for
U-Boot's network and driver infrastructure.

We now have MDIO drivers and PHY drivers

An MDIO driver provides:
read
write
reset

A PHY driver provides:
(optionally): probe
config - initial setup, starting of auto-negotiation
startup - waiting for AN, and reading link state
shutdown - any cleanup needed

The ethernet drivers interact with the PHY Lib using these functions:
phy_connect()
phy_config()
phy_startup()
phy_shutdown()

Each PHY driver can be configured separately, or all at once using
config_phylib_all_drivers.h (added in the patch which adds the drivers)

We also provide generic drivers for Clause 22 (10/100/1000), and
Clause 45 (10G) PHYs.

We also implement phy_reset(), and call it in phy_connect(). Because
phy_reset() is essentially the same as miiphy_reset, but:
a) must support 10G PHYs, and
b) should use the phylib primitives,

we implement miiphy_reset, using phy_reset(), but only when
CONFIG_PHYLIB is set. Otherwise, we just use the old version. In this
way, we save on compile size, even if we don't manage to save code size.

Pulled ethtool.h and mdio.h from:
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
782d640afd15af7a1faf01cfe566ca4ac511319d
With many, many deletions so as to enable compilation under u-boot
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Acked-by: NDetlev Zundel <dzu@denx.de>

8xx was left behind when fixing up powerpc linking
scripts to support -fpic.
Signed-off-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se>

Mostly putting a space between function name and "(", and
doing return (foo)
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Acked-by: NDetlev Zundel <dzu@denx.de>

There were a few files which were already using phy_read and phy_write
for their PHY function names.  It's only a few places, and the name
seems most appropriate for the high-level abstraction, so let's
rename the other versions to something more specific.

Also, uec_phy.c had a marvell_init function which I renamed to not
conflict with the one in marvell.c

Lastly, uec_phy.c was putting a space between the phy writing
function names, and the open paren, so I fixed that
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Acked-by: NDetlev Zundel <dzu@denx.de>

This is merely a rearrangement.  No changes to the code, except
to remove now-useless declarations.
Signed-off-by: NMingkai Hu <Mingkai.hu@freescale.com>
Acked-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Acked-by: NDetlev Zundel <dzu@denx.de>

Signed-off-by: NMingkai Hu <Mingkai.hu@freescale.com>
Acked-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Acked-by: NDetlev Zundel <dzu@denx.de>

When fdt_fixup_memory_banks is called with 2-cell address and size
fields in the device-tree (IE: 64-bit address and size), then it will
overflow its on-stack "tmp" buffer.

This fixes the buffer size and adds a comment explaining how many bytes
need to be allocated per record.
Signed-off-by: NKyle Moffett <Kyle.D.Moffett@boeing.com>
Cc: Jerry Van Baren <vanbaren@cideas.com>
Acked-by: NGerald Van Baren <vanbaren@cideas.com>

Modify eLBC based platform's NAND loader Makefile to preprocess nand loader
linker script and then use it.
Signed-off-by: NDipen Dudhat <Dipen.Dudhat@freescale.com>
CC: Scott Wood <scottwood@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This patch changes the large page nand_command() routine to use a word
offset instead of a byte offset. The 'offs' argument gets divided by 2
so that the offset passed to nand_command() is still by byte offset.
Originally, the offset was not shifted and when too high an offset was
requested the nand chip would attempt to read non-existent data.
Signed-off-by: NAlex Waterman <awaterman@dawning.com>

Change variables to const to reduce code size, these values are
hardcoded via defines anyways so we might as well assume they
are constants
Signed-off-by: NMatthew McClintock <msm@freescale.com>
cc: Scott Wood <scottwood@freescale.com>

This patch sync with Brian's patch on Linux in nand_flash_detect_onfi()

	commit b7b1a29d94c17e4341856381bccb4d17495bea60
	Author: Brian Norris <computersforpeace@gmail.com>
	Date:   Sun Dec 12 00:23:33 2010 -0800

	    mtd: nand: rearrange ONFI revision checking, add ONFI 2.3

	    In checking for the ONFI revision, the first conditional (for checking
	    "unsupported" ONFI) seems unnecessary.  All ONFI revisions should be
	    backwards-compatible; even if this is not the case on some newer ONFI
	    revision, it should simply fail the second version-checking if-else block
	    (i.e., the bit-fields for 1.0, 2.0, etc. would not be set to 1). Thus, we
	    move our "unsupported" condition after having checked each bit field.

	    Also, it's simple enough to add a condition for ONFI revision 2.3. Note
	    that this does *NOT* mean we handle all new features of ONFI versions
	    above 1.0.
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
Acked-by: NFlorian Fainelli <ffainelli@freebox.fr>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>

This patch sync with David's patch on Linux in nand_flash_detect_onfi()

	commit 4ccb3b4497ce01fab4933704fe21581e30fda1a5
	Author: David Woodhouse <David.Woodhouse@intel.com>
	Date:   Fri Dec 3 16:36:34 2010 +0000

    	mtd: nand: Fix integer overflow in ONFI detection of chips >= 4GiB
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>

The omap24xx driver only seems to support devices that have a single subaddress
byte. With these types of devices, the first access in a bus transaction is
usually a write (writes the subaddress) followed by either a read or write to
access the devices registers.

Many such devices will respond to a read as the first access, but there are at
least some that will NACK such a read. (e.g. ADV7180.)

The probe function attempts to detect a devices ACK to a read access only and
fails to find devices that NACK a read.

This commit modifies the probe function to start a write instead. This detects
devices that respond to reads (since they must also respond to writes) as well
as those that only respond to writes. The bus is immediately set to idle after a
(N)ACK avoiding actually writing anything to the device.
Signed-off-by: NNick Thompson <nick.thompson@ge.com>

Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>

This seems to pad to one byte longer than required
Signed-off-by: NSimon Glass <sjg@chromium.org>

Make sure the pin request passed before attempting to use it later on.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Most arches don't support OSE, and this is a new bootm target, so the
likelihood of any board actually wanting this today is fairly low.

Any board who actually wants this can enable it in the board-specific
config without making it a default bloat.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The Blackfin gpio command isn't terribly Blackfin-specific.  So generalize
the few pieces into two new optional helpers:
	name_to_gpio() - turn a string name into a GPIO #
	gpio_status() - display current pin bindings (think /proc/gpio)

Once these pieces are pulled out, we can relocate the cmd_gpio.c into the
common directory.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

There's no real need to keep these functions in the cmd_mem file since
they do not use any of the common global mem variables.  So split them
out into their own dedicated cmd files.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Commit 6ee1416e (mtd, cfi: introduce
void flash_protect_default(void)) introduced a bug which resulted in
boards that define CONFIG_SYS_FLASH_AUTOPROTECT_LIST not compiling with
the the following errors and warning:
  ptyser@petert u-boot $ make -s xpedite520x
  Configuring for xpedite520x board...
  cfi_flash.c: In function 'flash_protect_default':
  cfi_flash.c:2118: error: 'i' undeclared (first use in this function)
  cfi_flash.c:2118: error: (Each undeclared identifier is reported only once
  cfi_flash.c:2118: error: for each function it appears in.)
  cfi_flash.c:2118: error: 'apl' undeclared (first use in this function)
  cfi_flash.c:2118: error: invalid application of 'sizeof' to incomplete type 'struct apl_s'
  cfi_flash.c: In function 'flash_init':
  cfi_flash.c:2137: warning: unused variable 'apl'
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
Reported-by: NKumar Gala <galak@kernel.crashing.org>
Cc: Heiko Schocher <hs@denx.de>

Signed-off-by: NJames Kosin <jkosin@intcomgrp.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Hi Terry,

> So I guess:
> mmc_init calls mmc_send_op_cond  that set  high_capacity,
> than it calls mmc_startup, that, with MMC_CMD_SEND_CSD  command, set
> the capacity, using values in CSD register.
> So I guess that mmc_change_freq should not recalculate high_capacity.
>
> It seems better, isn't it?
>
> Regards,
> Raffaele
>

Finally I think that it is enough to apply the following patch in order
to fix the issue.

Regards,
Raffaele
Signed-off-by: NAndy Fleming <afleming@freescale.com>

Defining CONFIG_MMC_TRACE in the include board file it is possible to activate
a tracing support.
This code helps in case of eMMC hw failure or to investigate possible eMMC
initialization issues.
Signed-off-by: NRaffaele Recalcati <raffaele.recalcati@bticino.it>
Signed-off-by: NAndy Fleming <afleming@freescale.com>

The first SEND_OP_COND (CMD1) command added is used to ask card capabilities.
After it an AND operation is done between card capabilities and host
capabilities (at the moment only for the voltage field).
Finally the correct value is sent to the MMC, waiting that the card
exits from busy state.
Signed-off-by: NRaffaele Recalcati <raffaele.recalcati@bticino.it>
Signed-off-by: NAndy Fleming <afleming@freescale.com>