- 08 10月, 2019 9 次提交
-
-
由 Peng Fan 提交于
To support DM_VIDEO, Add display node for lcdif Drop board iomuxc settings. Enable DM_VIDEO Signed-off-by: NPeng Fan <peng.fan@nxp.com> Reviewed-by: NAnatolij Gustschin <agust@denx.de>
-
由 Peng Fan 提交于
When booting SPL on the board, met boot failure: " Trying to boot from MMC2 MMC Device 1 not found spl: could not find mmc device 1. error: -19 SPL: failed to boot from all boot devices " Let's register the two mmc controllers in SPL stage to avoid boot failure. Signed-off-by: NPeng Fan <peng.fan@nxp.com> Reviewed-by: NFabio Estevam <festevam@gmail.com>
-
由 Peng Fan 提交于
Add i.MX6ULZ board support. the i.MX6ULZ is SW compatible with i.MX6ULL. so most code of i.MX6ULL can be reused by i.MX6ULZ. Signed-off-by: NPeng Fan <peng.fan@nxp.com> Reviewed-by: NYe Li <ye.li@nxp.com> Reviewed-by: NFabio Estevam <festevam@gmail.com>
-
由 Peng Fan 提交于
Add i.MX6ULZ cpu type and helper. Signed-off-by: NPeng Fan <peng.fan@nxp.com> Reviewed-by: NYe Li <ye.li@nxp.com> Reviewed-by: NFabio Estevam <festevam@gmail.com>
-
由 Peng Fan 提交于
Import kernel dts for i.MX6ULZ from commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux") Signed-off-by: NPeng Fan <peng.fan@nxp.com> Reviewed-by: NYe Li <ye.li@nxp.com> Reviewed-by: NFabio Estevam <festevam@gmail.com>
-
由 Peng Fan 提交于
Sync kernel dts for i.MX6ULL from commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux") Signed-off-by: NPeng Fan <peng.fan@nxp.com> Reviewed-by: NYe Li <ye.li@nxp.com> Reviewed-by: NFabio Estevam <festevam@gmail.com>
-
由 Peng Fan 提交于
Sync kernel dts for i.MX6UL from commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux") Signed-off-by: NPeng Fan <peng.fan@nxp.com> Reviewed-by: NYe Li <ye.li@nxp.com> Reviewed-by: NFabio Estevam <festevam@gmail.com>
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Eugeniy Paltsev 提交于
The commit 642b80d2 ("net: designware: drop compatible altr, socfpga-stmmac") breaks designware ethernet for all ARC boards. It removes "altr, socfpga-stmmac" compatible from "drivers/net/designware.c" without changing compatible in the boards which use it. Fix that by adding "snps,arc-dwmac-3.70a" compatible string to "drivers/net/designware.c" and using it in ARC boards device tree. Signed-off-by: NEugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
-
- 07 10月, 2019 5 次提交
-
-
由 Tom Rini 提交于
- Regression work-around on SoCFPGA by disabling WDT in some cases. - Fix seg fault on 'host info' in some cases.
-
由 AKASHI Takahiro 提交于
With the patch below applied, host_block_dev structure was switched to be placed in platdata rather than priv. The command "host info" must be aligned with this change. Otherwise, we will see "Segmentation Fault." Fixes: 8f994c86 ("sandbox: blk: Switch to use platdata_auto_alloc_size for the driver data") Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Tested-by: NBin Meng <bmeng.cn@gmail.com> Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Maxime Ripard 提交于
I'm not at bootlin anymore, and my mail address doesn't work any longer. Signed-off-by: NMaxime Ripard <mripard@kernel.org>
-
由 Simon Goldschmidt 提交于
These boards don't have a watchdog enabled in SPL, so make sure CONFIG_SPL_WDT is not enabled. Fixes: commit 6874cb72 ("watchdog: Split WDT from SPL_WDT") Signed-off-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
-
由 Heinrich Schuchardt 提交于
%s/plaforms/platforms/g Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
- 06 10月, 2019 1 次提交
-
-
git://git.denx.de/u-boot-sh由 Tom Rini 提交于
- ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator
-
- 05 10月, 2019 15 次提交
-
-
由 Tom Rini 提交于
- Assorted TI platform fixes - Revert the change that broke environment flag validation - Assorted typo fixes - Assorted Kconfig dependency fixes - Other minor bug fixes
-
https://gitlab.denx.de/u-boot/custodians/u-boot-x86由 Tom Rini 提交于
- dm: core: Correct low cell in ofnode_read_pci_addr() - dm: core: Correct bad cast in ofnode_get_addr_size_index()
-
由 Tom Rini 提交于
This reverts commit 7d477654. The changes here break environment validation and furthermore do not seem to be required. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Adam Ford 提交于
The SPL device tree is missing the entires for gpio1, uart1, usdhc1 and usdhc2. This creates the missing imx6q-logicpd-u-boot.dtsi file which will enable these functions so SPL can properly setup UART, detect microSD card, and startup. Fixes: 8f4691e3 ("ARM: imx6q_logic: With SPL_OF_CONTROL enabled, remove MMC init") Signed-off-by: NAdam Ford <aford173@gmail.com>
-
由 Ovidiu Panait 提交于
Existing debug output is mixed with the function name: initcall_run_list() initcall: 25263initcall_run_list() (relocated to 425263) Turn it to: initcall_run_list() initcall: 25263 (relocated to 425263) Signed-off-by: NOvidiu Panait <ovpanait@gmail.com>
-
由 Andrius Štikonas 提交于
Signed-off-by: NAndrius Štikonas <andrius@stikonas.eu>
-
由 Tom Rini 提交于
Migrate all of the existing OS support options that are under CONFIG_BOOTM_* to Kconfig. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Roman Stratiienko 提交于
At this point we are using part number sub-command to retrieve UUID of the partition using it's name. e.g.: part number mmc $mmcdev system_a system_a_index part uuid mmc $mmcdev:${system_a_index} system_a_uuid Since 'part uuid' sub-command expects partition index in hex format and 'part number' returns decimal value, 'part uuid' command will provide wrong UUID or fail. Fixes: be683756 ("cmd: part: Add 'number' sub-command") Cc: Dirk Behme <dirk.behme@de.bosch.com> Reported-by: NPontus Fuchs <pontus.fuchs@se.bosch.com> Signed-off-by: NRoman Stratiienko <roman.stratiienko@globallogic.com> Signed-off-by: NEugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: NTom Rini <trini@konsulko.com> Reviewed-by: NIgor Opaniuk <igor.opaniuk@gmail.com>
-
由 Jean-Jacques Hiblot 提交于
To accommodate the growth of u-boot, we need to shift the location of the secure monitor. Moving it 64kB further. Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com>
-
由 Andrew F. Davis 提交于
On HS devices the access to TRNG is restricted on the non-secure ARM side, disable the node in DT to prevent firewall violations. Signed-off-by: NAndrew F. Davis <afd@ti.com> Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 AKASHI Takahiro 提交于
Otherwise, menu_show() will be undefined in bootdelay_process(). Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
-
由 Ley Foon Tan 提交于
This updates MAINTAINERS and git-mailrc to add me as maintainer for socfpga. Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Heinrich Schuchardt 提交于
*.pyc files contain compiled Python bytecode. 'make mrproper' should remove them. Removing *.pyc files helps for instance sometimes when running into an error "binman: Unknown entry type 'blob' in node '/binman/blob'". Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Michal Simek 提交于
Trivial fix. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Andrew F. Davis 提交于
The memory allocated to store the FIT image containing SYSFW and board configuration data is statically defined to the largest size expected. This was 269000 bytes but now needs to be grown to 276000 to make room for the signatures attached to the board configuration data on High Security devices. Signed-off-by: NAndrew F. Davis <afd@ti.com>
-
- 03 10月, 2019 2 次提交
-
-
由 Simon Glass 提交于
At present this code passes an fdt_addr_t pointer as a u64 pointer which is not safe, since sizeof(fdt_addr_t) may be 4, e.g. with sandbox. Correct this to avoid a stack corruption problem. Fixes: e679d03b (core: ofnode: Add ofnode_get_addr_size_index) Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> [bmeng: correct one typo in the commit message] Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Simon Glass 提交于
This reads the low cell of the PCI address from the wrong cell. Fix it. Also fix the function that this code came from. Fixes: 9e512045 (dm: core: Add operations on device tree references) Fixes: 4ea5243a (fdt: fix fdtdec_get_pci_addr() for CONFIG_PHYS_64BIT) Signed-off-by: NSimon Glass <sjg@chromium.org> Tested-by: NStephen Warren <swarren@nvidia.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
- 02 10月, 2019 2 次提交
-
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-x86由 Tom Rini 提交于
- Propagate acpi_rsdp_addr to x86 kernel via boot parameters
-
- 01 10月, 2019 2 次提交
-
-
由 Andy Shevchenko 提交于
This is reincarnation of the U-Boot commit 3469bf42 Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Date: Wed Jan 10 19:40:15 2018 +0200 x86: zImage: Propagate acpi_rsdp_addr to kernel via boot parameters after upstream got eventually the Linux kernel commit e6e094e053af75cbc164e950814d3d084fb1e698 Author: Juergen Gross <jgross@suse.com> Date: Tue Nov 20 08:25:29 2018 +0100 x86/acpi, x86/boot: Take RSDP address from boot params if available Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Matthias Brugger 提交于
When booting through the efi stub, the memory map get's created by reading the dram bank information. Depending on the version of the RPi4 this information changes. Read the device tree to initialize the dram bank data structure. This way the kernel is able to access the whole range of available memory. Signed-off-by: NMatthias Brugger <mbrugger@suse.com>
-
- 30 9月, 2019 4 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel由 Tom Rini 提交于
First set of u-boot-atmel fixes for 2019.10 cycle: This includes only tiny cleanups on env changes related to 2019.10 new features: removal of duplicate env settings (otherwise there may be warnings in building..) and a small fix for flashes on Gardena smart gateway (requires nand bad block tables).
-
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip由 Tom Rini 提交于
- Fix efuse read data number for rk3399 - make_fit_atf.py: fix .its generation for a single atf image
-
由 Tudor Ambarus 提交于
'commit a9221f3e ("at91, omap2plus: configs: migrate CONFIG_ENV_ to defconfigs")' migrated CONFIG_ENV_ macros to defconfigs but did not remove the identical redefinition of these macros in include/configs/. Since the duplicated macros have the same value as the ones in defconfigs, no "redefined" warnings were raised. Remove duplicated macros for all sama5 and sam9x5ek boards. While verifying that the removal of the macros from include/configs did not change the same macros in defconfigs, overwrite the old defconfig by saving them with the output from "make arch=ARM savedefconfig". This resulted in the movement of some macros in the defconfig files. Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
-
由 Stefan Roese 提交于
This patch enables the BBT in NAND on the AT91SAM based GARDENA smart Gateway. This is especially important, since the Linux driver also enables this option and uses the BBT table pages. Without setting this option, U-Boot will try to re-use these pages again (e.g. UBI). Signed-off-by: NStefan Roese <sr@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Tom Rini <trini@konsulko.com>
-