- 25 1月, 2020 12 次提交
-
-
由 Simon Glass 提交于
This define seems better suited to the eeprom header file, particularly as it is only used in the eeprom.c file. Move it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This is a network function so let's move it into that header. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This seems pretty old now. It has not been converted to driver model and is not used by any boards. Drop it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This function is defined in exports.c so move it to its header file. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Simon Glass 提交于
This is an init function so move it out of the common header. Avoid using the typedef so that we don't have to include the global_data header file. Also tidy up the function style in comments while we are here. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
These are filesystem functions and belong in the filesystem header file. Move them. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This function belongs in the network header file. Move it. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
These declarations are only used in fdtdec.c so move them to its header file. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
These functions are not used in U-Boot. Drop them. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This function belongs more in flash.h than common.h so move it. Also remove the space before the bracket in some calls. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Move this function out of common.h and into a better place. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
-
由 Simon Glass 提交于
This is not used in U-Boot. Drop it. Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
-
- 21 1月, 2020 1 次提交
-
-
由 Tom Rini 提交于
- Based on bionic-20200112 tag from Ubuntu - Add graphviz (Heinrich) Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 18 1月, 2020 1 次提交
-
-
由 Tom Rini 提交于
- Add support and tests for AES192 and AES256
-
- 17 1月, 2020 8 次提交
-
-
由 Philippe Reynes 提交于
This commit add to u-boot the support to decrypt fit image encrypted with aes. The FIT image contains the key name and the IV name. Then u-boot look for the key and IV in his device tree and decrypt images before moving to the next stage. Signed-off-by: NPhilippe Reynes <philippe.reynes@softathome.com>
-
由 Philippe Reynes 提交于
This commit add the support of encrypting image with aes in mkimage. To enable the ciphering, a node cipher with a reference to a key and IV (Initialization Vector) must be added to the its file. Then mkimage add the encrypted image to the FIT and add the key and IV to the u-boot device tree. Signed-off-by: NPhilippe Reynes <philippe.reynes@softathome.com>
-
由 Philippe Reynes 提交于
This commit add test unit for aes196 and aes256. Signed-off-by: NPhilippe Reynes <philippe.reynes@softathome.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Philippe Reynes 提交于
This commit add test unit for aes128. Signed-off-by: NPhilippe Reynes <philippe.reynes@softathome.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Philippe Reynes 提交于
Until now, we only support aes128. This commit add the support of aes192 and aes256. Signed-off-by: NPhilippe Reynes <philippe.reynes@softathome.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Philippe Reynes 提交于
In the code, we use the size of the key for the size of the block. It's true when the key is 128 bits, but it become false for key of 192 bits and 256 bits. So to prepare the support of aes192 and 256, we introduce a constant for the iaes block size. Signed-off-by: NPhilippe Reynes <philippe.reynes@softathome.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
https://gitlab.denx.de/u-boot/custodians/u-boot-mmc由 Tom Rini 提交于
- Cleanup of fsl_esdhc driver together with arch/defconfig change - Add quirk for APP_CMD retry
-
https://gitlab.denx.de/u-boot/custodians/u-boot-marvell由 Tom Rini 提交于
- Clearfog: Fix SD booting (Baruch) - Misc updates to MMC handling in SPL to support booting from main data partition (vs hardware boot partition) on MVEBU (Baruch)
-
- 16 1月, 2020 18 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze由 Tom Rini 提交于
Xilinx/FPGA changes for v2020.04 ARM64: - Add INIT_SPL_RELATIVE dependency SPL: - FIT image fix - Enable customization of bl2_plat_get_bl31_params() Pytest: - Add test for octal/hex conversions Microblaze: - Fix manual relocation for one SPI instance Nand: - Convert zynq/zynqmp drivers to DM Xilinx: - Enable boot script location via Kconfig - Support OF_SEPARATE in board FDT selection - Remove low level uart setup it is done later by code - Add support for DEVICE_TREE variable passing for SPL Zynq: - Enable jtag boot mode via distro boot - Removing unused baseaddresses from hardware.h - DT fixups ZynqMP: - Fix emmc boot sequence - Simplify spl logic around bss and board_init_r() - Support psu_post_config_data() calling - Tune mini-nand DTS - Fix psu wiring for a2197 boards - Add runtime MMC device boot order filling in spl - Clear ATF handoff handling with custom bl2_plat_get_bl31_params() - Add support u-boot.its generation - Use single image configuration for all platforms - Enable PANIC_HANG via Kconfig - DT fixups - Firmware fixes - Add support for zcu208 and zcu1285 Versal: - Fix emmc boot sequence - Enable board_late_init() by default
-
由 Tom Rini 提交于
- MediaTek improvements - Some generic clk improvements - A few assorted bugfixes
-
由 Sam Shih 提交于
This patch add CONFIG_TARGET_MT7623 into mt7623n_bpir2_defconfig to fix the mt7623 compile error after building others mediatek target platform Signed-off-by: NSam Shih <sam.shih@mediatek.com> Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>
-
由 Sam Shih 提交于
This patch move u-boot properties to -u-boot.dtsi file. Signed-off-by: NSam Shih <sam.shih@mediatek.com> Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>
-
由 Sam Shih 提交于
This adds a general board file based on MT7622 SoCs from MediaTek. This commit is adding the basic boot support for the MT7622 rfb. Signed-off-by: NSam Shih <sam.shih@mediatek.com> Reviewed-by: NRyder Lee <ryder.lee@mediatek.com> Tested-by: NFrank Wunderlich <frank-w@public-files.de>
-
由 Sam Shih 提交于
This patch add mmc and sd support for Mediatek MT7622 SoCs Signed-off-by: NSam Shih <sam.shih@mediatek.com> Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>
-
由 Sam Shih 提交于
This patch add power domain support for Mediatek MT7622 SoCs Signed-off-by: NRyder Lee <ryder.lee@mediatek.com> Signed-off-by: NSam Shih <sam.shih@mediatek.com>
-
由 Sam Shih 提交于
This patch fix clock-rate overflow problem in mediatek clock driver common part. Signed-off-by: NSam Shih <sam.shih@mediatek.com> Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>
-
由 Sam Shih 提交于
This patch add clock driver for MediaTek MT7622 SoC. Signed-off-by: NRyder Lee <ryder.lee@mediatek.com> Signed-off-by: NSam Shih <sam.shih@mediatek.com>
-
由 Sam Shih 提交于
Due to the pinctrl hardware of MT7622 is difference from others SoC which using the common part of mediatek pinctrl. So we need to modify the common part of mediatek pinctrl. Signed-off-by: NSam Shih <sam.shih@mediatek.com> Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>
-
由 Sam Shih 提交于
This patch add Pinctrl driver for MediaTek MT7622 SoC. Signed-off-by: NSam Shih <sam.shih@mediatek.com> Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>
-
由 Sam Shih 提交于
Add support for MediaTek MT7622 SoC. This include the file that will initialize the SoC after boot and its device tree. Signed-off-by: NSam Shih <sam.shih@mediatek.com> Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>
-
由 Chunfeng Yun 提交于
If make the ref clock optional, no need refer to fixed-clock when the ref clock is always on or comes from oscillator directly. Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>
-
由 Chunfeng Yun 提交于
No need check -ENOSYS anymore after add dummy_enable() for fixed-clock. Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>
-
由 Chunfeng Yun 提交于
This is used to avoid clk_enable() return -ENOSYS. Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>
-
由 Chunfeng Yun 提交于
Sometimes we may need get (optional) clock without a device, that means use ofnode. e.g. when the phy node has subnode, and there is no device created for subnode, in this case, we need these new APIs to get subnode's clock. Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>
-
由 Chunfeng Yun 提交于
Add valid check for clk->dev, it's useful when get optional clock even when the clk point is valid, but its dev will be NULL. Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>
-
由 Chunfeng Yun 提交于
If skip all return error number, it may skip some real error cases, so only skip the error when the clock is not provided in DTS Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>
-