- 07 7月, 2019 1 次提交
-
-
- 06 7月, 2019 1 次提交
-
-
https://github.com/mbgg/u-boot由 Tom Rini 提交于
- fix complation error for CONFIG_USB - update RPi3 DTBs to v5.1-rc6 state - add defconfig for RPi3 B+ - Fix BCM2835_MBOX_TAG_TEST_PIXEL_ORDER define
-
- 05 7月, 2019 1 次提交
-
-
由 Andy Yan 提交于
Commit b238e4b0 ("rockchip: Cleanup of make_fit_atf.py.") set firmware = "atf_1"; loadables = "uboot","atf_1","atf_2"; Actually it should be: firmware = "atf_1"; loadables = "uboot","atf_2","atf_3"; Signed-off-by: NAndy Yan <andy.yan@rock-chips.com> Reviewed-by: NKever Yang <kever.yang@rock-chips.com>
-
- 04 7月, 2019 9 次提交
-
-
由 Neil Armstrong 提交于
Add missing mailing-list to the amlogic boards MAINTAINERS file. Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
-
https://gitlab.denx.de/u-boot/custodians/u-boot-imx由 Tom Rini 提交于
Fixes for 2019.07 ----------------- - Wandboard
-
由 Fabio Estevam 提交于
After the conversion to DM the U-Boot proper binary name is 'u-boot-dtb.img', so adjust it accordingly. Signed-off-by: NFabio Estevam <festevam@gmail.com>
-
由 Fabio Estevam 提交于
After the transition to DM, only the mx6dl/solo wandboard is supported. Add FIT image support so that all the wandboard variants can be supported, like it was prior to the DM conversion. Successfully booted Linux on mx6q/solo/qp wandboards. Signed-off-by: NFabio Estevam <festevam@gmail.com>
-
由 Fabio Estevam 提交于
Add a mmc0 alias so that U-Boot proper can associate mmc0 with the boot SD card. Signed-off-by: NFabio Estevam <festevam@gmail.com>
-
由 Fabio Estevam 提交于
Import wandboard devicetree files so that the mx6q and mx6qp variants can be properly supported. Signed-off-by: NFabio Estevam <festevam@gmail.com>
-
由 Fabio Estevam 提交于
Udate the wandboard devicetree files with the ones from kernel 5.1.9. Signed-off-by: NFabio Estevam <festevam@gmail.com>
-
由 Fabio Estevam 提交于
Place dtbs under SoC level rather than board level. imx6q-novena.dtb and imx6dl-wandboard-revb1.dtb were placed under the board config option, so move them to SoC level. This also aligns with the kernel dts Makefile format. Signed-off-by: NFabio Estevam <festevam@gmail.com>
-
由 Fabio Estevam 提交于
Keep dtb entries sorted to help adding new dtbs in an organized form. Signed-off-by: NFabio Estevam <festevam@gmail.com>
-
- 02 7月, 2019 11 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip由 Tom Rini 提交于
- fix for atf bl31_image_info pointer - fix for rockpro64 vdd_log init - fix for tinker-rk3288 SPL size too big
-
由 Kever Yang 提交于
All the config for TPL has been update, we can enable the TPL. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
The raw u-boot.bin for tinker board has been about 450KB without debug option, and 550KB with all debug on, and the default value is 200KB, which is not enough for run raw u-boot.bin. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
We need to update TEXT BASE for TPL/SPL/U-Boot; SPL no need relocate STACK after enable TPL, so remove it; Don't enable pinctrl names so that SPL can get pinctrl dts; Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
rockchip pinctrl driver has update to use dts, so we need to add the pinctrl config in SPL for sdmmc. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
Migrate all the "u-boot,dm-pre-reloc" tag from rk3288-tinker.dts into rk3288-tinker-u-boot.dtsi. When both board level and soc level '-u-boot.dtsi' files exist, we need to include the soc level 'rk3288-u-boot.dtsi' manually. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
Move all the tag "u-boot,dm-pre-reloc" from rk3288.dtsi into rk3288-u-boot.dtsi. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Kever Yang 提交于
TPL is at SRAM while other stage is at SDRAM, so it needs separate STACK. Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>
-
由 Kever Yang 提交于
More boards other than vyasa needs TPL, so enable the TPL configs at chip level instead of board level. Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
-
由 Mark Kettenis 提交于
Add missing regulator-init-microvolt property to vdd_log regulator. Signed-off-by: NMark Kettenis <kettenis@openbsd.org> Reviewed-by: NKever Yang <kever.yang@rock-chips.com> (Rebase on latest u-boot-rockchip master) Signed-off-by: NKever Yang <kever.yang@rock-chips.com> Change-Id: I13b24fb81e8ad269d7dbb0c7b67f5f4795d2e775
-
由 Frieder Schrempf 提交于
The pointer to struct atf_image_info in bl31_params_mem.bl31_params.bl31_image_info is not initialized before being dereferenced. This can cause U-Boot to crash right before jumping to the BL31 ATF binary. Signed-off-by: NFrieder Schrempf <frieder.schrempf@kontron.de> Fixes: bcc1726a ("spl: add support to booting with ATF") Reviewed-by: NKever Yang <kever.yang@rock-chips.com>
-
- 01 7月, 2019 2 次提交
-
-
由 Shawn Guo 提交于
There is a regression seen on Poplar platform, which doesn't even show a U-Boot version banner on booting. It turns out that due to landing of commit 3a7c45f6 ("simple-bus: add DM_FLAG_PRE_RELOC flag to simple-bus driver"), we need to increase SYS_MALLOC_F_LEN from its default size 0x400, as pre-relocation requires more memory there. Let's increase SYS_MALLOC_F_LEN to 0x4000 to fix the regression. Thanks to Andreas Färber <afaerber@suse.de> for reporting, and Bin Meng <bmeng.cn@gmail.com> for trouble shooting. Reported-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Tested-by: NAndreas Färber <afaerber@suse.de>
-
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel由 Tom Rini 提交于
Second set of u-boot-atmel fixes for 2019.07 cycle
-
- 30 6月, 2019 1 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-uniphier由 Tom Rini 提交于
UniPhier SoC updates for v2019.07 - Add SPI pin-mux data for pinctrl driver - Remove unused code - Trivial bug-fix and clean-up
-
- 29 6月, 2019 9 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-efi由 Tom Rini 提交于
Pull request for UEFI sub-system for v2019.07-rc5 (4) The definition of an unimplemented function is corrected.
-
由 Masahiro Yamada 提交于
Move the sg_set_pinsel macro to arch/arm/mach-uniphier/arm32/debug_ll.S since it is not used anywhere else. Move the C functions sg_set_{pinsel,iectrl} to debug-uart.c since they are not used anywhere else. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
debug_uart_init() is called from spl_board_init(), which is only compiled for SPL. For U-boot proper, _debug_uart_init() is unreachable, so dropped by the dead code elimination. Now that 64-bit SoCs of this SoC family no longer support SPL, debug-uart-ld20.c is never compiled. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
This file calls readl(), so needs to include <linux/io.h>. Currently, it relies on someone else including it. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
Commit e27d6c7d ("ARM: uniphier: simplify SoC ID get function") accidentally removed the macros needed to compile debug_ll.S Revive them. Fixes: e27d6c7d ("ARM: uniphier: simplify SoC ID get function") Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Kunihiko Hayashi 提交于
Add pin-mux settings for SPI controller. Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Heinrich Schuchardt 提交于
ConvertPointer() must be EFIAPI. The first parameter should be of type efi_uint_t. Use the same parameter name as the UEFI specification. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
- 28 6月, 2019 5 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-imx由 Tom Rini 提交于
Fixes for 2019.07 - menlo board - allow SDB on Sabre - HAB for mx6sl - apalis board
-
https://gitlab.denx.de/u-boot/custodians/u-boot-stm由 Tom Rini 提交于
STM32 MCU fixes/cleanup: - Fix SPL console for STM32F769 Discovery - Fix Memory Protection Unit size for STM32F4 series - Cleanup DT for STM32F746 Discovery
-
由 Patrice Chotard 提交于
The MPU region dedicated for SDRAM for STM32F4 SoCs family was set to 16MB, but STM32F429 Evaluation board have 32MB of SDRAM. When kernel starts, only first 16MB of SDRAM are configured with XN (eXecute Never) bit disabled, whereas kernel is using 32MB. To avoid such situation in the future, extend this MPU region to 512MB as for STM32F7/H7. It fixes the following user land exception on STM32F429 Evaluation board : [ 1.713002] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.722605] devtmpfs: mounted [ 1.733057] Freeing unused kernel memory: 72K [ 1.737622] This architecture does not have kernel memory protection. [ 1.744070] Run /sbin/init as init process [ 1.906850] [ 1.906850] Unhandled exception: IPSR = 00000004 LR = fffffffd [ 1.914282] CPU: 0 PID: 1 Comm: init Not tainted 5.1.0-00002-gcf9ca5719954 #6 [ 1.921433] Hardware name: STM32 (Device Tree Support) [ 1.926601] PC is at 0x1a00b64 [ 1.929642] LR is at (null) [ 1.932669] pc : [<01a00b64>] lr : [<00000000>] psr: 01000000 [ 1.938993] sp : 01a5cfb0 ip : 00000000 fp : 00000000 [ 1.944269] r10: 01a43b00 r9 : 00000000 r8 : 00000000 [ 1.949564] r7 : 00000000 r6 : 00000000 r5 : 00000000 r4 : 00000000 [ 1.956168] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : 00000000 [ 1.962701] xPSR: 01000000 [ 1.965506] CPU: 0 PID: 1 Comm: init Not tainted 5.1.0-00002-gcf9ca5719954 #6 [ 1.972658] Hardware name: STM32 (Device Tree Support) [ 1.978132] [<0000c009>] (unwind_backtrace) from [<0000b24f>] (show_stack+0xb/0xc) [ 1.986024] [<0000b24f>] (show_stack) from [<0000b947>] (__invalid_entry+0x4b/0x4c) Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrice Chotard 提交于
As in stm32f7-u-boot.dtsi these nodes already have "u-bootdm-pre-reloc" property, no need to add them again in stm32f746-disco-u-boot.dtsi. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-
由 Patrice Chotard 提交于
This allow to get console output in SPL for stm32f769-disco. Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
-