- 16 1月, 2020 29 次提交
-
-
由 Sam Shih 提交于
This patch add power domain support for Mediatek MT7622 SoCs Signed-off-by: NRyder Lee <ryder.lee@mediatek.com> Signed-off-by: NSam Shih <sam.shih@mediatek.com>
-
由 Sam Shih 提交于
This patch fix clock-rate overflow problem in mediatek clock driver common part. Signed-off-by: NSam Shih <sam.shih@mediatek.com> Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>
-
由 Sam Shih 提交于
This patch add clock driver for MediaTek MT7622 SoC. Signed-off-by: NRyder Lee <ryder.lee@mediatek.com> Signed-off-by: NSam Shih <sam.shih@mediatek.com>
-
由 Sam Shih 提交于
Due to the pinctrl hardware of MT7622 is difference from others SoC which using the common part of mediatek pinctrl. So we need to modify the common part of mediatek pinctrl. Signed-off-by: NSam Shih <sam.shih@mediatek.com> Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>
-
由 Sam Shih 提交于
This patch add Pinctrl driver for MediaTek MT7622 SoC. Signed-off-by: NSam Shih <sam.shih@mediatek.com> Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>
-
由 Sam Shih 提交于
Add support for MediaTek MT7622 SoC. This include the file that will initialize the SoC after boot and its device tree. Signed-off-by: NSam Shih <sam.shih@mediatek.com> Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>
-
由 Chunfeng Yun 提交于
If make the ref clock optional, no need refer to fixed-clock when the ref clock is always on or comes from oscillator directly. Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>
-
由 Chunfeng Yun 提交于
No need check -ENOSYS anymore after add dummy_enable() for fixed-clock. Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>
-
由 Chunfeng Yun 提交于
This is used to avoid clk_enable() return -ENOSYS. Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>
-
由 Chunfeng Yun 提交于
Sometimes we may need get (optional) clock without a device, that means use ofnode. e.g. when the phy node has subnode, and there is no device created for subnode, in this case, we need these new APIs to get subnode's clock. Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>
-
由 Chunfeng Yun 提交于
Add valid check for clk->dev, it's useful when get optional clock even when the clk point is valid, but its dev will be NULL. Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>
-
由 Chunfeng Yun 提交于
If skip all return error number, it may skip some real error cases, so only skip the error when the clock is not provided in DTS Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>
-
由 Chunfeng Yun 提交于
The SSUSB IP's clocks come from ssusbsys module on mt7629, so add its driver Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NRyder Lee <ryder.lee@mediatek.com>
-
由 mingming lee 提交于
This adds a general board file based on MT8512 SoCs from MediaTek. Apart from the generic parts (cpu) we add some low level init codes and initialize the early clocks. This commit is adding the basic boot support for the MT8512 eMMC board. Signed-off-by: Nmingming lee <mingming.lee@mediatek.com>
-
由 mingming lee 提交于
For CMD21 tuning data, the 128/64 bytes data may coming in very short time, before msdc_start_data(), the read data has already come, in this case, clear MSDC_INT will cause the interrupt disappear and lead to the thread hang. the solution is just clear all interrupts before command was sent. Signed-off-by: Nmingming lee <mingming.lee@mediatek.com>
-
由 mingming lee 提交于
This patch adds mmc support for MediaTek MT8512/MT8110 SoCs. MT8512/MT8110 SoCs puts the tune register at top layer, so need add new code to support it. Signed-off-by: Nmingming lee <mingming.lee@mediatek.com>
-
由 mingming lee 提交于
Add Pinctrl driver for MediaTek MT8512 SoC. Signed-off-by: Nmingming lee <mingming.lee@mediatek.com>
-
由 mingming lee 提交于
Add configurable pcw_chg_reg/ibits/fmin to mtk_pll to support mt8512
-
由 mingming lee 提交于
Add new set_clr_upd mux type and related operation to mtk common clock driver to support mt8512
-
由 mingming lee 提交于
Add clock driver for MediaTek MT8512 SoC, include topckgen, apmixedsys and infracfg support. Signed-off-by: Nmingming lee <mingming.lee@mediatek.com>
-
由 mingming lee 提交于
Add support for MediaTek MT8512 SoC. This include the file that will initialize the SoC after boot and its device tree. Signed-off-by: Nmingming lee <mingming.lee@mediatek.com>
-
由 Sam Protsenko 提交于
Sam doesn't work for Linaro anymore, so Linaro mail is not valid. Change it to his home mail instead. Signed-off-by: NSam Protsenko <joe.skb7@gmail.com>
-
由 Alexandre Besnard 提交于
When no partition table is found, users should be warned so. Warning that no device is available in this case could be misleading, especially as it is the same error when no device is selected. Signed-off-by: NAlexandre Besnard <alexandre.besnard@softathome.com>
-
由 Heinrich Schuchardt 提交于
The device tree compiler expects that a node with a unit-address has a reg property. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Sean Anderson 提交于
Some features implicitly depended on MALLOC_F and OF_LIBFDT and would fail at link-time if these features were not enabled. Signed-off-by: NSean Anderson <seanga2@gmail.com>
-
由 Sean Anderson 提交于
asm-generic/sections.h references ulong but does not include linux/types.h Signed-off-by: NSean Anderson <seanga2@gmail.com>
-
由 Vignesh Raghavendra 提交于
Add stub for dma_memcpy() and dma_get_device when CONFIG_DMA is disabled. This avoids ifdefs in driver code using DMA APIs Signed-off-by: NVignesh Raghavendra <vigneshr@ti.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Vignesh Raghavendra 提交于
Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMA. This allows to use macros such as CONFIG_IS_ENABLED() that allow conditional compilation of code for SPL and U-Boot. Signed-off-by: NVignesh Raghavendra <vigneshr@ti.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
https://gitlab.denx.de/u-boot/custodians/u-boot-efi由 Tom Rini 提交于
Pull request for UEFI sub-system for efi-2020-04-rc1-2 Bug fixes for the UEFI sub-system are provided: * imply VIDEO_ANSI for correct cursor positioning and colors * fix issues in the UEFI block device driver * add missing documentation
-
- 15 1月, 2020 11 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-imx由 Tom Rini 提交于
----------------------------------- - imx8: add capricorn giedi deneb boards - imx6: fixed fow wandboard - imx7: DM_ETHER for pico-imx7d - fsl_esdhc_imx: add broken-cd property - New SOC: IMXRT10xx Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/637126531
-
-
由 Heinrich Schuchardt 提交于
UEFI programs like GRUB make change terminal colors which requires support for ANSI escape sequences. Let CONFIG_EFI_LOADER=y imply CONFIG_VIDEO_ANSI. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Use the correct printf codes for the debug output in efi_uc_start() and efi_uc_stop(). Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Use the correct protocol in efi_uc_stop() when detaching the driver from the controller. Change the block IO unit test for the block device driver to throw an error instead of a todo if teardown fails. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
For automating testing we should be able to power off the test system. The implementation of EFI_RESET_SHUTDOWN requires the do_poweroff() function which is only available if CONFIG_CMD_POWEROFF=y. Enable CONFIG_CMD_POWEROFF if PSCI reset is available. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Provide a sober description of how control can be returned by a UEFI binary. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Heinrich Schuchardt 提交于
Add the missing Sphinx documentation. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
由 Giulio Benetti 提交于
This commit adds board support for i.MXRT1050-EVK from NXP. This board is an evaluation kit provided by NXP for i.MXRT105x processor family. More information about this board can be found here: https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1050-evaluation-kit:MIMXRT1050-EVK The initial supported/tested devices include: - Debug serial - SD Signed-off-by: NGiulio Benetti <giulio.benetti@benettiengineering.com>
-
由 Giulio Benetti 提交于
Add i.IMXRT family basic support. Signed-off-by: NGiulio Benetti <giulio.benetti@benettiengineering.com>
-
由 Giulio Benetti 提交于
Add compatible "fsl,imxrt-usdhc" to make mmc working on i.MXRT platforms with CONFIG_DM_MMC=y. Signed-off-by: NGiulio Benetti <giulio.benetti@benettiengineering.com>
-