- 06 10月, 2014 37 次提交
-
-
由 Marek Vasut 提交于
Add function to enable and disable FPGA bridges. This code is used by the FPGA manager to disable the bridges before programming the FPGA and will later be also used by the initialization code for the chip to put the chip into well defined state during startup. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Acked-by: NPavel Machek <pavel@denx.de>
-
由 Pavel Machek 提交于
Add code necessary to program the FPGA part of SoCFPGA from U-Boot with an RBF blob. This patch also integrates the code into the FPGA driver framework in U-Boot so it can be used via the 'fpga' command. Signed-off-by: NPavel Machek <pavel@denx.de> Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> V2: Move the not-CPU specific stuff into drivers/fpga/ and base this on the cleaned up altera FPGA support.
-
由 Marek Vasut 提交于
Cosmetic change to the checkboard() function output. Align the output with the rest of initial output produced by U-Boot. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Acked-by: NPavel Machek <pavel@denx.de>
-
由 Pavel Machek 提交于
The bi_boot_params must point to offset 0x100 in DRAM. Make it so. Signed-off-by: NPavel Machek <pavel@denx.de> Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de>
-
由 Pavel Machek 提交于
Cosmetic change to the print_cpuinfo() function output. Align the output with the rest of initial output produced by U-Boot. Signed-off-by: NPavel Machek <pavel@denx.de> Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de>
-
由 Pavel Machek 提交于
Add CPU function to register and initialize the dw_mmc SD controller. This allows us to use the HPS SDMMC block. Signed-off-by: NPavel Machek <pavel@denx.de> Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de>
-
由 Pavel Machek 提交于
Add function to initialize the EMAC blocks upon board startup. The preprocessor guards against building on SoCFPGA-VT and against SPL build are not needed as those are handled implicitly via both SPL framework and the socfpga_cyclone5.h config file, which will not define CONFIG_DESIGNWARE_ETH if building for SoCFPGA-VT. We cannot handle two EMAC ethernet blocks yet, therefore the ifdefs. Once there is hardware using both EMAC blocks, this ifdef will have to go. Signed-off-by: NPavel Machek <pavel@denx.de> Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de>
-
由 Marek Vasut 提交于
Add functions to reset the EMAC ethernet blocks. We cannot handle two EMAC ethernet blocks yet, therefore the ifdefs. Once there is hardware using both EMAC blocks, this ifdef will have to go. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Acked-by: NPavel Machek <pavel@denx.de>
-
由 Marek Vasut 提交于
The timer reload value is a property of the timer hardware and there is no reason for this to be configurable. Place this into the timer driver just like on the other hardware. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Acked-by: NDinh Nguyen <dinguyen@opensource.altera.com> Acked-by: NPavel Machek <pavel@denx.de>
-
由 Pavel Machek 提交于
Make the SoCFPGA MMC stub pick clock via the clock manager frequency accessors instead of hard-coding the frequency. Also fix calloc() misuse. Signed-off-by: NPavel Machek <pavel@denx.de> Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Acked-by: NDinh Nguyen <dinguyen@opensource.altera.com>
-
由 Marek Vasut 提交于
Add the missing pieces from the reference clock code from Altera. This puts the code on par with the Altera U-Boot fork for all but the SDRAM self-refresh bits, which are not part of this patch. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Acked-by: NPavel Machek <pavel@denx.de>
-
由 Marek Vasut 提交于
Clean up the clock code definitions so they are aligned with mainline standards. There are no functional changes in this patch. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Acked-by: NPavel Machek <pavel@denx.de>
-
由 Marek Vasut 提交于
Pull out functions to read frequency of Main clock VCO and PLL clock VCO as the code is duplicated multiple times. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Acked-by: NDinh Nguyen <dinguyen@opensource.altera.com> Acked-by: NPavel Machek <pavel@denx.de>
-
由 Pavel Machek 提交于
Add the entire bulk of code to read out clock configuration from the SoCFPGA CPU registers. This is important for MMC, QSPI and UART drivers as otherwise they cannot determine the frequency of their upstream clock. Signed-off-by: NPavel Machek <pavel@denx.de> Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> V2: Fixed the L4 MP clock divider and synced the clock code with latest rocketboards codebase (thanks Dinh for pointing this out)
-
由 Marek Vasut 提交于
Add some stub defines, which are used by the clock code, but are missing from the auto-generated header file for the SoCFPGA family. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Acked-by: NDinh Nguyen <dinguyen@opensource.altera.com> Acked-by: NPavel Machek <pavel@denx.de>
-
由 Marek Vasut 提交于
The inlining is done by GCC when needed, there is no need to do it explicitly. Furthermore, the inline keyword does not force-inline the code, but is only a hint for the compiler. Scrub this hint. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Acked-by: NDinh Nguyen <dinguyen@opensource.altera.com> Acked-by: NPavel Machek <pavel@denx.de>
-
由 Marek Vasut 提交于
The bit definitions for clock manager are complete chaos. Implement some basic logical order into them. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Acked-by: NPavel Machek <pavel@denx.de>
-
由 Marek Vasut 提交于
Clean up the system manager register definition and add the missing register definitions in place. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Acked-by: NPavel Machek <pavel@denx.de>
-
由 Pavel Machek 提交于
This adds watchdog disable. It is neccessary for running Linux kernel. Signed-off-by: NPavel Machek <pavel@denx.de> Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> V2: Move RSTMGR_PERMODRST_L4WD0_LSB to reset_manager.h Reset watchdog only if CONFIG_HW_WATCHDOG is undefined (the default)
-
由 Marek Vasut 提交于
Sort the list of functional block addresses and fix indentation. No functional change. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Acked-by: NPavel Machek <pavel@denx.de> Acked-by: NChin Liang See <clsee@altera.com>
-
由 Pavel Machek 提交于
Add base addresses for all subsystems as documented in the Cyclone V HPS documentation. Signed-off-by: NPavel Machek <pavel@denx.de> Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Acked-by: NChin Liang See <clsee@altera.com>
-
由 Marek Vasut 提交于
Merge branches 'topic/drivers/fpga-20141006', 'topic/drivers/mmc-20141006', 'topic/drivers/net-20141006', 'topic/tools/mkimage-20141006' and 'topic/arm/cache-20141006' into HEAD
-
由 Marek Vasut 提交于
Add configuration for the write-allocate mode of L1 D-Cache on ARM. This is needed for D-Cache operation on Cortex-A9 on the SoCFPGA . Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Acked-by: NPavel Machek <pavel@denx.de>
-
由 Charles Manning 提交于
Like many platforms, the Altera socfpga platform requires that the preloader be "signed" in a certain way or the built-in boot ROM will not boot the code. This change automatically creates an appropriately signed preloader from an SPL image. The signed image includes a CRC which must, of course, be generated with a CRC generator that the SoCFPGA boot ROM agrees with otherwise the boot ROM will reject the image. Unfortunately the CRC used in this boot ROM is not the same as the Adler CRC in lib/crc32.c. Indeed the Adler code is not technically a CRC but is more correctly described as a checksum. Thus, the appropriate CRC generator is added to lib/ as crc32_alt.c. Signed-off-by: NCharles Manning <cdhmanning@gmail.com> Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Acked-by: NPavel Machek <pavel@denx.de> V2: - Zap unused constant - Explicitly print an error message in case of error - Rework the hdr_checksum() function to take the *header directly instead of a plan buffer pointer
-
由 Marek Vasut 提交于
Add a few new variables to make the cache handling less cryptic. Add a variable for DMA and DATA descriptor start and end, so the correctness of the code is easier to inspect. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Acked-by: NPavel Machek <pavel@denx.de> Acked-by: NChin Liang See <clsee@altera.com>
-
由 Marek Vasut 提交于
Fix remaining cache alignment issues in the DWC Ethernet driver. Please note that the cache handling in the driver is making the code hideous and thus the next patch cleans that up. In order to make this change reviewable though, the cleanup is split from it. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Acked-by: NPavel Machek <pavel@denx.de>
-
由 Pavel Machek 提交于
Old saying says that more than three exclamation marks in a row are sign of mental disease. Cleanup micrel.c. Signed-off-by: NPavel Machek <pavel@denx.de> Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Acked-by: NChin Liang See <clsee@altera.com>
-
由 Pavel Machek 提交于
Remove this symbol from configs, since it's unused. Signed-off-by: NPavel Machek <pavel@denx.de> Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Acked-by: NChin Liang See <clsee@altera.com>
-
由 Marek Vasut 提交于
The DMA descriptors used by the DW MMC block must be aligned to cacheline size, otherwise we are unable to properly flush/inval cache over them and we get data corruption. The reason I chose this approach of expanding the structure is because the driver allocates the descriptors in bulk. This approach does waste space by inserting slop inbetween the descriptors, but it makes access to the descriptors easy as the compiler does know the real size of the structure. It also makes cache operations easy, since the size of the structure is cache aligned and the structure start address is as well. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Acked-by: NPavel Machek <pavel@denx.de>
-
由 Pavel Machek 提交于
The dw_mmc driver was responding to errors with debug(). Change that to prinf()/puts() respectively so that any errors are immediately obvious. Also adjust english in comments. Signed-off-by: NPavel Machek <pavel@denx.de> Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Acked-by: NChin Liang See <clsee@altera.com>
-
由 Marek Vasut 提交于
Add a table of FPGA family with matching functions associated with it and make all the code just look up the family in that table and call the associated function instead of the horrible switch voodoo which was duplicated all over the place. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Acked-by: NPavel Machek <pavel@denx.de>
-
由 Marek Vasut 提交于
Get rid of the line-over-80 problems and zap the typedef that went alongside those enums. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Acked-by: NPavel Machek <pavel@denx.de>
-
由 Marek Vasut 提交于
Make the function return either 0 or -EINVAL, that is, normal expected error codes and success codes instead of true/false nonsense. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Acked-by: NPavel Machek <pavel@denx.de>
-
由 Marek Vasut 提交于
Move the function to the top of the file to avoid forward declaration. No functional change. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Acked-by: NPavel Machek <pavel@denx.de>
-
由 Marek Vasut 提交于
Further improve the indentation in the rest of the file, where the indentation is initially a bit less brutal. There is no functional change in this patch. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Acked-by: NPavel Machek <pavel@denx.de>
-
由 Marek Vasut 提交于
Boldly go, where no programmer has gone before and just clean up the indentation mayhem. No functional change. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de>
-
由 Marek Vasut 提交于
Clean up the printf() statements and get rid of the PRINTF() macro by replacing it with debug_cond(). Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Acked-by: NPavel Machek <pavel@denx.de>
-
- 27 9月, 2014 3 次提交
-
-
-
由 Simon Glass 提交于
Some of the #defines in spi.h are not bracketed. To avoid future mistakes add brackets. Also add an explanatory comment for SPI_CONN_DUAL_... Signed-off-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NJagannadha Sutradharudu Teki <jaganna@xilinx.com>
-
由 Simon Glass 提交于
In preparation for changing the error handling in this code for driver model, move it into its own function. Reviewed-by: NJagannadha Sutradharudu Teki <jaganna@xilinx.com> Signed-off-by: NSimon Glass <sjg@chromium.org>
-