- 08 4月, 2008 6 次提交
-
-
由 Daniel Hellstrom 提交于
SPARC/LEON2: added support for Gaisler simulator GRSIM/TSIM for SPARC/LEON2 targets. See www.gaisler.com for information. Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
-
由 Daniel Hellstrom 提交于
SPARC/LEON3: added support for GR-CPCI-AX2000 FPGA AX board. The FPGA is exchangeable but a standard LEON3 design is assumed. See www.gaisler.com for information. Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
-
由 Daniel Hellstrom 提交于
SPARC/LEON3: added support for Altera NIOS Development kit (STRATIX II Edition) with GRLIB template design. See www.gaisler.com for information. Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
-
由 Daniel Hellstrom 提交于
SPARC/LEON3: added support for Gaisler GRSIM/TSIM2 SPARC/LEON3 simulatorn. See www.gaisler.com for information. Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
-
由 Daniel Hellstrom 提交于
SPARC/LEON3: added support for GR-XC3S-1500 board with GRLIB template design. See www.gaisler.com for board information. Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
-
由 Daniel Hellstrom 提交于
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
-
- 01 4月, 2008 3 次提交
-
-
由 Stelian Pop 提交于
Support for booting from internal DataFlash, external DataFlash card or NAND flash is available. Signed-off-by: NStelian Pop <stelian@popies.net>
-
由 TsiChung Liew 提交于
This board never went into production Signed-off-by: NZachary P. Landau <zachary.landau@labxtechnologies.com> Acked-by: NTsiChung Liew <Tsi-Chung.Liew@freescale.com> Acked-by: NJohn Rigby <jrigby@freescale.com>
-
由 Matthew Fettke 提交于
Signed-off-by: NMatthew Fettke <mfettke@videon-central.com> Signed-off-by: NTsiChung Liew <Tsi-Chung.Liew@freescale.com> Acked-by: NJohn Rigby <jrigby@freescale.com>
-
- 30 3月, 2008 5 次提交
-
-
由 David Brownell 提交于
Add some missing ARM boards to MAKEALL. These build correctly, unlike several of the boards already listed. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
-
由 Guennadi Liakhovetski 提交于
This patch adds support for the MX31ADS evaluation board from Freescale, initialization code is copied from RedBoot sources, also provided by Freescale. Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-
由 Sascha Hauer 提交于
This patch adds support for the Phytec Phycore-i.MX31 board Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-
由 Sascha Hauer 提交于
This patch adds support for the mx31 litekit board Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-
由 Peter Pearse 提交于
Signed-off-by: NPeter Pearse <peter.pearse@arm.com>
-
- 28 3月, 2008 4 次提交
-
-
由 Nobuhiro Iwamatsu 提交于
R2D plus is SH reference board used with SH7751R. This board has 266Mhz CPU, 64MB SDRAM, Cardbus, CF interface, one PCI bus, VGA, and two Ethernet controller. Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Mark Jonas 提交于
Signed-off-by: NMark Jonas <mark.jonas@de.bosch.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Yusuke Goda 提交于
Renesas Solutions R7780MP is a reference board on SH7780. This board has serial, 10/100 base Ethernet deivice, CF slot and VGA devices. This board can set extension board. Extension board has 10/100/1000 base Ethernet device, PCI slot, S-ATA, iDVR slot. Signed-off-by: NYusuke Goda <goda.yusuke@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 goda.yusuke 提交于
Migo-R is a board based on SH7722 and has may devices. In this patch, supported SCIF, NOR flash and Ethernet. Signed-off-by: NYusuke Goda <goda.yusuke@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 27 3月, 2008 1 次提交
-
-
由 Stefan Roese 提交于
This patch adds support for the AMCC Glacier 460GT eval board. The main difference to the Canyonlands board are listed here: - 4 ethernet ports instead of 2 - no SATA port - no USB port Currently EMAC2+3 are not working. This will be fixed in a later release. Signed-off-by: NStefan Roese <sr@denx.de>
-
- 15 3月, 2008 3 次提交
-
-
由 Stefan Roese 提交于
460EX doesn't support a fixed bootstrap option to boot from 512 byte page NAND devices. The only bootstrap option for NAND booting is option F for 2k page devices. So to boot from a 512 bype page device, the I2C bootstrap EEPROM needs to be programmed accordingly. This patch adds basic NAND booting support for the AMCC Canyonlands aval board and also adds support to the "bootstrap" command, to enable NAND booting I2C setting. Tested with 512 byte page NAND device (32MByte) on Canyonlands. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
This patch adds support for the AMCC Canyonlands 460EX evaluation board. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Niklaus Giger 提交于
Signed-off-by: NNiklaus Giger <niklaus.giger@netstal.com>
-
- 15 2月, 2008 1 次提交
-
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
- 14 2月, 2008 2 次提交
-
-
由 Timo Tuunainen 提交于
Kimmo Leppala / Sysart and Timo Tuunainen / Sysart
-
由 Stelian Pop 提交于
Signed-off-by: NStelian Pop <stelian@popies.net>
-
- 18 1月, 2008 5 次提交
-
-
由 Haavard Skinnemoen 提交于
Add support for the ATNGW100 Network Gateway reference design, including flash, ethernet and MMC support. Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>
-
由 Michael Schwingen 提交于
Hi, The patch adds 4 boards, called AcTux-1 .. AcTux-4. This patch contains the files that contain changes for multiple boards, the board-specific files follow as separate patches. Signed-off-by: NMichael Schwingen <michael@schwingen.org>
-
由 TsiChungLiew 提交于
Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com> Signed-off by: John Rigby <jrigby@freescale.com>
-
由 TsiChungLiew 提交于
Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com> Signed-off by: John Rigby <jrigby@freescale.com>
-
由 TsiChungLiew 提交于
Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com> Signed-off by: John Rigby <jrigby@freescale.com>
-
- 17 1月, 2008 4 次提交
-
-
由 Matthias Fuchs 提交于
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>
-
由 Vlad Lungu 提交于
With serial, NE2000, IDE support. Tested in big-endian mode. Memory size hard-coded to 128M for now, so don't play with the -m option. Signed-off-by: NVlad Lungu <vlad@comsys.ro>
-
由 Kim Phillips 提交于
MPC837xERDB board support includes: * DDR2 330MHz hardcoded (soldered on the board) * Local Bus NOR Flash * I2C, UART and RTC * eTSEC RGMII (TSEC0 - RTL8211B with MII; * TSEC1 - VSC7385 local bus, hardcoded, requires seperate firmware * load) Signed-off-by: NKevin Lam <kevin.lam@freescale.com> Signed-off-by: NJoe D'Abbraccio <joe.d'abbraccio@freescale.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Dave Liu 提交于
The features list: - Boot from NOR Flash - DDR2 266MHz hardcoded configuration - Local bus NOR Flash R/W operation - I2C, UART, MII and RTC - eTSEC0/1 support - PCI host Signed-off-by: NDave Liu <daveliu@freescale.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
- 15 1月, 2008 1 次提交
-
-
由 Nobuhiro Iwamatsu 提交于
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
- 12 1月, 2008 4 次提交
-
-
由 Heiko Schocher 提交于
Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Heiko Schocher 提交于
Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Guennadi Liakhovetski 提交于
The TK885D board uses a TQM885D module from TQ, this port adds an own configuration file and adds a last_stage_init() method to configure the two PHYs, depending on the phy_auto_nego environment variable. Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-
- 11 1月, 2008 1 次提交
-
-
由 Anton Vorontsov 提交于
This is MPC8360E based board with: - 256MB fixed SDRAM; - 8MB Intel Strata NOR flash; - StMICRO 64MiB NAND flash; - two 10/100/1000 ethernet ports connected via Broadcom BCM5481 PHYs; - two 10/100 ethernet ports connected via National DP83848 PHYs; - one PCI and one miniPCI slots; - four serial ports (two NS16550-compatible, two UCCs); - four USB ports working through MPC8360E "FHCI" USB controller; - Fujitsu MB86277 graphics controller; - Analog to Digital Converter/Touchscreen controller, AD7843 connected to SPI. Features not supported in this patch are: - StMICRO 64MiB NAND flash (patch sent); - MINT framebuffer initialization (patch is pending); - Fetching production information from the EEPROM via I2C; - FHCI USB; - Two slow UCCs used as RS-485 UARTs. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-