- 12 4月, 2019 11 次提交
-
-
由 Miquel Raynal 提交于
mtd_oobavail() returns either mtd->oovabail or mtd->oobsize. Both values are unsigned 32-bit entities, so there is no reason to pretend returning a signed one. Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
-
由 Marek Vasut 提交于
Add Macronix MX66U2G45F flash device description. This is a 256 MiB part. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Vignesh R <vigneshr@ti.com> [jagan: use 'g' instead of 'f' in flash name] Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
-
由 Neil Armstrong 提交于
Since all DTS files has been switched to "jedec,spi-nor", remove the "spi-flash" compatible from the bindings examples. Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Reviewed-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: NRick Chen <rick@andestech.com> Reviewed-by: NPatrick Delaunay <Patrick.delaunay@st.com> Reviewed-by: NJagan Teki <jagan@openedev.com>
-
由 Neil Armstrong 提交于
Now the "spi-flash" compatible has been removed in the DTS files, remove this compatible from sf_probe to finally use the Linux "jedec,spi-nor" compatible. Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Reviewed-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: NJagan Teki <jagan@openedev.com>
-
由 Neil Armstrong 提交于
The x86 code and DT uses "spi-flash" to detect a flash node, switch to "jedec,spi-nor" in the DTS files and in fdtdec by switching the GENERIC_SPI_FLASH value to to jedec,spi-nor. Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Reviewed-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: NJagan Teki <jagan@openedev.com>
-
由 Neil Armstrong 提交于
There is no reason not to use the Linux "jedec,spi-nor" binding in U-Boot dts files. This compatible has been added in sf_probe, let use it. This patch switches to jedec,spi-nor when spi-flash is used in the DTS and DTSI files, and removed spi-flash when jedec,spi-nor is already present. The x86 dts are switched in a separate commit since it depends on a change in fdtdec. Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Acked-by: NStefan Roese <sr@denx.de> Reviewed-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: NEvgeniy Paltsev <paltsev@synopsys.com> Reviewed-by: NRick Chen <rick@andestech.com> Reviewed-by: NPatrick Delaunay <Patrick.delaunay@st.com> Reviewed-by: NJagan Teki <jagan@openedev.com>
-
由 Heiko Schocher 提交于
Add support for SPANSION s25fl064l Signed-off-by: NHeiko Schocher <hs@denx.de> Reviewed-by: NJagan Teki <jagan@openedev.com> Acked-by: NVignesh R <vigneshr@ti.com>
-
由 Stefan Roese 提交于
This patch sync's the U-Boot SPI NAND GigaDevice GD5F1GQ4UExxG support with the latest Linux version (v5.0-rc3) plus the chip supported posted on the MTD list. Only the currently in U-Boot available chip is supported with this sync. The changes for the GD5F1GQ4UExxG are: - Name of NAND device changed to better reflect the real part - OOB layout changed to only reserve 1 byte for BBT - Use ECC caps 8bits/512bytes instead of 8bits/2048bytes - Enhanced ecc_get_status() function to determine and report a more fine grained bit error status Signed-off-by: NStefan Roese <sr@denx.de> Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: NJagan Teki <jagan@openedev.com>
-
由 Ley Foon Tan 提交于
Use quad write if SPI_TX_QUAD flag is set. Tested quad write on Stratix 10 SoC board (Micron serial NOR flash, mt25qu02g) Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com> Reviewed-by: NJagan Teki <jagan@openedev.com>
-
-
-
- 10 4月, 2019 29 次提交
-
-
由 Tom Rini 提交于
- test.py tests for mmc - ext4 symlink support and other fixes - ext4 block group descriptor sizing
-
由 Tom Rini 提交于
Currently enabling fsck on FAT16/FAT32 exposes that we have problems with: TestFsBasic.test_fs13[fat16] TestFsBasic.test_fs11[fat32] TestFsBasic.test_fs12[fat32] TestFsBasic.test_fs13[fat32] TestFsExt.test_fs_ext1[fat32] TestFsExt.test_fs_ext2[fat32] TestFsExt.test_fs_ext3[fat32] TestFsExt.test_fs_ext4[fat32] TestFsExt.test_fs_ext5[fat32] TestFsExt.test_fs_ext6[fat32] TestFsExt.test_fs_ext7[fat32] TestFsExt.test_fs_ext8[fat32] TestFsExt.test_fs_ext9[fat32] TestMkdir.test_mkdir6[fat16] TestMkdir.test_mkdir1[fat32] TestMkdir.test_mkdir2[fat32] TestMkdir.test_mkdir3[fat32] TestMkdir.test_mkdir4[fat32] TestMkdir.test_mkdir5[fat32] TestMkdir.test_mkdir6[fat32] TestUnlink.test_unlink1[fat16] TestUnlink.test_unlink2[fat16] TestUnlink.test_unlink3[fat16] TestUnlink.test_unlink4[fat16] TestUnlink.test_unlink5[fat16] TestUnlink.test_unlink6[fat16] TestUnlink.test_unlink7[fat16] TestUnlink.test_unlink1[fat32] TestUnlink.test_unlink2[fat32] TestUnlink.test_unlink3[fat32] TestUnlink.test_unlink4[fat32] TestUnlink.test_unlink5[fat32] TestUnlink.test_unlink6[fat32] TestUnlink.test_unlink7[fat32] This is because we don't update the "information sector" on FAT32. While in the future we should resolve this problem and include that feature, we should enable fsck for ext4 to ensure that things remain in good shape there. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Benjamin Lim 提交于
Ext4 allows for arbitrarily sized block group descriptors when 64-bit addressing is enabled, which was previously not properly supported. This patch dynamically allocates a chunk of memory of the correct size. Signed-off-by: NBenjamin Lim <jarsp.ctf@gmail.com>
-
由 Marek Vasut 提交于
Add option to the mmc rd test to check the duration of the execution of the mmc read command. This allows intercepting read performance regressions. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Marek Vasut 提交于
Add test for 'mmc info' subcommand. This tests whether the card information is obtained correctly and verifies the device, bus speed, bus mode and bus width. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Marek Vasut 提交于
Add test for 'mmc rescan' subcommand. This tests whether the system can switch to a specific card and then rescan the card. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Marek Vasut 提交于
Add separate test for 'mmc dev' subcommand. This tests whether the system can switch to a specific card. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Marek Vasut 提交于
Factor out the 'mmc dev' call so it can be recycled by other tests. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Anssi Hannula 提交于
A FAT12/FAT16 root directory location is specified by a sector offset and it might not start at a cluster boundary. It also resides before the data area (before cluster 2). However, the current code assumes that the root directory is located at a beginning of a cluster, causing no files to be found if that is not the case. Since the FAT12/FAT16 root directory is located before the data area and is not aligned to clusters, using unsigned cluster numbers to refer to the root directory does not work well (the "cluster number" may be negative, and even allowing it be signed would not make it properly aligned). Modify the code to not use the normal cluster numbering when referring to the root directory of FAT12/FAT16 and instead use a cluster-sized offsets counted from the root directory start sector. This is a relatively common case as at least the filesystem formatter on Win7 seems to create such filesystems by default on 2GB USB sticks when "FAT" is selected (cluster size 64 sectors, rootdir size 32 sectors, rootdir starts at half a cluster before cluster 2). dosfstools mkfs.vfat does not seem to create affected filesystems. Signed-off-by: NAnssi Hannula <anssi.hannula@bitwise.fi> Reviewed-by: NBernhard Messerklinger <bernhard.messerklinger@br-automation.com> Tested-by: NBernhard Messerklinger <bernhard.messerklinger@br-automation.com>
-
由 Gero Schumacher 提交于
Hi, when I try to load a sparse file via ext4load, I am getting the error message 'invalid extent' After a deeper look in the code, it seems to be an issue in the function ext4fs_get_extent_block in fs/ext4/ext4_common.c: The file starts with 1k of zeros. The blocksize is 1024. So the first extend block contains the following information: eh_entries: 1 eh_depth: 1 ei_block 1 When the upper layer (ext4fs_read_file) asks for fileblock 0, we are running in the 'invalid extent' error message. For me it seems, that the code is not prepared for handling a sparse block at the beginning of the file. The following change, solved my problem: I am really not an expert in ext4 filesystems. Can somebody please have a look at this issue and give me a feedback, if I am totally wrong or not?
-
由 Jean-Jacques Hiblot 提交于
Test cases are: 1) basic link creation, verify it can be followed 2) chained links, verify it can be followed 3) replace exiting file a with a link, and a link with a link. verify it can be followed 4) create a broken link, verify it can't be followed Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Jean-Jacques Hiblot 提交于
The command line is: ln <interface> <dev[:part]> target linkname Currently symbolic links are supported only in ext4 and only if the option CMD_EXT4_WRITE is enabled. Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Jean-Jacques Hiblot 提交于
Re-use the functions used to write/create a file, to support creation of a symbolic link. The difference with a regular file are small: - The inode mode is flagged with S_IFLNK instead of S_IFREG - The ext2_dirent's filetype is FILETYPE_SYMLINK instead of FILETYPE_REG - Instead of storing the content of a file in allocated blocks, the path to the target is stored. And if the target's path is short enough, no block is allocated and the target's path is stored in ext2_inode.b.symlink As with regulars files, if a file/symlink with the same name exits, it is unlinked first and then re-created. Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com> [trini: Fix ext4 env code] Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Jean-Jacques Hiblot 提交于
There is no need to modify the buffer passed to ext4fs_write_file(). The memset() call is not required here and was likely copied from the equivalent part of the ext4fs_read_file() function where we do need it. Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Jean-Jacques Hiblot 提交于
We need to make sure that file writes,file creation, etc. are properly performed and do not corrupt the filesystem. To help with this, introduce the assert_fs_integrity() function that executes the appropriate fsck tool. It should be called at the end of any test that modify the content/organization of the filesystem. Currently only supports FATs and EXT4. Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Jean-Jacques Hiblot 提交于
If the metadata checksums are enabled, all write operations will fail. Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Stephen Warren 提交于
When a file contains extents, U-Boot currently reads extent-related data for each block in the file, even if that data is located in the same block each time. This significantly slows down loading of files that use extents. Implement a very dumb cache to prevent repeatedly reading the same block. Files with extents now load as fast as files without. Note: There are many cases where read_allocated_block() is called. This patch only addresses one of those places; all others still read redundant data in any case they did before. This is a minimal patch to fix the load command; other cases aren't fixed. Signed-off-by: NStephen Warren <swarren@nvidia.com>
-
由 Eugeniu Rosca 提交于
v2018.01 commit e23eb942 ("ARM: rmobile: Stop using rcar-common/common.c on Gen3") removed board/renesas/rcar-common/common.c from the build chain with the reasoning that calling arch_preboot_os() is no longer needed. However, it left the arch_preboot_os() in place. Get rid of it. This is done in preparation of resurrecting rcar-common/common.c. NOTE: The three removed header includes (io.h, sys_proto.h, rcar-mstp.h) are in direct relationship with the dropped arch_preboot_os() hook. The other headers (common.h, rmobile.h) are going to be needed by pretty much anything that is going to appear in the rcar common code. So, keep the two in place. Signed-off-by: NEugeniu Rosca <erosca@de.adit-jv.com>
-
由 Marek Vasut 提交于
The E2 Alt board has two USB ports, add missing DT nodes to make the USB available. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Increase the USB power good delay on Alt, this is required with certain USB sticks, otherwise they might not be detected. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Reset and initialize the PHY once in the probe() function rather than doing it over and over again is start() function. This requires us to keep the clock enabled while the driver is in use. This significantly reduces the time between transfers as the PHY doesn't have to restart autonegotiation between transfers, which takes forever. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
-
由 Marek Vasut 提交于
Synchronize R-Car Gen3 device trees with Linux 5.0, commit 1c163f4c7b3f621efff9b28a47abb36f7378d783 . Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Synchronize R-Car Gen2 device trees with Linux 5.0, commit 1c163f4c7b3f621efff9b28a47abb36f7378d783 . Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Synchronize R-Car Gen3 pin control tables with Linux 5.0, commit 1c163f4c7b3f621efff9b28a47abb36f7378d783 . Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Synchronize R-Car Gen2 pin control tables with Linux 5.0, commit 1c163f4c7b3f621efff9b28a47abb36f7378d783 . Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Linux 5.0, commit 1c163f4c7b3f621efff9b28a47abb36f7378d783, has a TDSEL fix for R8A7790 H2 and R8A7794 E2 SoCs, implement similar fix for U-Boot. The difference here is that the SoC ES matching has to be implemented manually. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Synchronize R-Car Gen3 clock tables with Linux 5.0, commit 1c163f4c7b3f621efff9b28a47abb36f7378d783 . Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Synchronize R-Car Gen2 clock tables with Linux 5.0, commit 1c163f4c7b3f621efff9b28a47abb36f7378d783 . Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Add defconfig and board specific adjustments for the R8A77965 M3N ULCB. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-