- 20 10月, 2020 6 次提交
-
-
由 Chunfeng Yun 提交于
Add enum USB_SPEED_SUPER_PLUS for USB3.1 Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Chunfeng Yun 提交于
Add dt-binding for MediaTek USB3 DRD Driver which it's ported from the Linux kernel DTS binding: Documentation/devicetree/bindings/usb/mediatek,mtu3.txt Commit ID: 34d0545978b6 ("dt-bindings: usb: mtu3: fix typo of DMA clock name") Due to Dual-Role switch is not supported in Uboot, some properties are removed or changed. Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Chunfeng Yun 提交于
Add bindings for common properties, include maximum-speed, dr_mode and phy_type Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Naoki Hayama 提交于
%s/Occured/Occurred/ Signed-off-by: NNaoki Hayama <naoki.hayama@lineo.co.jp>
-
由 Chance.Yang 提交于
In buffer DMA mode, gadget should re-configure EP 0 to received SETUP packets when doeptsiz.xfersize is equal to a setup packet size(8 bytes) and EP 0 is in WAIT_FOR_SETUP state. Since EP 0 is not enabled in WAIT_FOR_SETUP state, SETUP packets is NOT received from RxFifo and wriiten to the external memory. Signed-off-by: NChance.Yang <chance.yang@vatics.com>
-
由 Heinrich Schuchardt 提交于
void * can be assigned to any pointer variable. Avoid unnecessary conversions. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
-
- 19 10月, 2020 13 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel由 Tom Rini 提交于
Second set of u-boot-atmel features for 2021.01 cycle: This feature set brings the rework of the clock tree for sam9x60 SoC. This makes the clock tree fully compatible with Common Clock Framework and allows full clock configuration in U-Boot. This means that the sam9x60 boards can boot now using U-Boot. This also includes the definitions for sam9x60 SiPs and a divisor fix for the clock on sama7g5 SoC.
-
由 Eugen Hristev 提交于
This SoC has the 5th divisor for the mck0 master clock. Adapt the characteristics accordingly. Reported-by: NMihai Sain <mihai.sain@microchip.com> Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com> Reviewed-by: NClaudiu Beznea <claudiu.beznea@microchip.com>
-
由 Eugen Hristev 提交于
clk-master can have 5 divisors with a field width of 3 bits on some products. Change the mask and number of divisors accordingly. Reported-by: NMihai Sain <mihai.sain@microchip.com> Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com> Reviewed-by: NClaudiu Beznea <claudiu.beznea@microchip.com>
-
由 Nicolas Ferre 提交于
SAM9X60 SiP (System in Package) are added for SoC identification. Signed-off-by: NNicolas Ferre <nicolas.ferre@microchip.com>
-
由 Claudiu Beznea 提交于
Use alphabetical order for entries in sam9x60ek-u-boot.dtsi Signed-off-by: NClaudiu Beznea <claudiu.beznea@microchip.com>
-
由 Claudiu Beznea 提交于
Update defconfigs for using common clock framework compatible clocks. Signed-off-by: NClaudiu Beznea <claudiu.beznea@microchip.com>
-
由 Claudiu Beznea 提交于
Use CCF compatible for PMC. With this, the board/SoC will be able to boot. Signed-off-by: NClaudiu Beznea <claudiu.beznea@microchip.com>
-
由 Claudiu Beznea 提交于
Use slow clock CCF compatible DT bindings. This will not break the above functionality as the SoC is not booting with current PMC bindings. Signed-off-by: NClaudiu Beznea <claudiu.beznea@microchip.com>
-
由 Claudiu Beznea 提交于
Use u-boot,dm-pre-reloc for slow xtal and main xtal. Signed-off-by: NClaudiu Beznea <claudiu.beznea@microchip.com>
-
由 Claudiu Beznea 提交于
Slow Xtal and Main Xtal are board specific. Add their proper frequency to board file. Signed-off-by: NClaudiu Beznea <claudiu.beznea@microchip.com>
-
由 Claudiu Beznea 提交于
Add SAM9X60 clock support compatible with CCF. Signed-off-by: NClaudiu Beznea <claudiu.beznea@microchip.com>
-
由 Claudiu Beznea 提交于
Heap base address is computed based on SYS_INIT_SP_ADDR by subtracting the SYS_MALLOC_F_LEN value in board_init_f_init_reserve(). Signed-off-by: NClaudiu Beznea <claudiu.beznea@microchip.com>
-
https://gitlab.denx.de/u-boot/custodians/u-boot-video由 Tom Rini 提交于
- add dw-mipi-dsi phy timings and Tx escape clock configuration - fix pwm backlight duty cycle calculation - migrate CONFIG_VIDEO_BMP_* and CONFIG_BMP_* to Kconfig
-
- 18 10月, 2020 7 次提交
-
-
由 Patrick Delaunay 提交于
Done with: ./tools/moveconfig.py BMP_16BPP BMP_24BPP BMP_32BPP Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrick Delaunay 提交于
Done with: ./tools/moveconfig.py VIDEO_BMP_RLE8 Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Patrick Delaunay 提交于
Done with: ./tools/moveconfig.py VIDEO_BMP_GZIP The 3 suspicious migration because CMD_BMP and SPLASH_SCREEN are not activated in these defconfigs: - trats_defconfig - s5pc210_universal_defconfig - trats2_defconfig Signed-off-by: NPatrick Delaunay <patrick.delaunay@st.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Dario Binacchi 提交于
For levels equal to the maximum value, the duty cycle must be equal to the period. Signed-off-by: NDario Binacchi <dariobin@libero.it> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Dario Binacchi 提交于
The description of the 'max_level' field was incorrectly assigned to the 'min_level' field. Signed-off-by: NDario Binacchi <dariobin@libero.it>
-
由 Neil Armstrong 提交于
The Amlogic D-PHY in the Amlogic AXG SoC Family does support a frequency higher than 10MHz for the TX Escape Clock, thus make the target rate configurable. This is based on the Linux commit [1] and adapted to the U-Boot driver. [1] a328ca7e4af3 ("drm/bridge: dw-mipi-dsi: permit configuring the escape clock rate") Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
-
由 Neil Armstrong 提交于
The timing values for dw-dsi are often dependent on the used display and according to Philippe Cornu will most likely also depend on the used phy technology in the soc-specific implementation. To solve this and allow specific implementations to define them as needed add a new get_timing callback to phy_ops and call this from the dphy_timing function to retrieve the necessary values for the specific mode. This is based on the Linux commit [1] and adapted to the U-Boot driver. [1] 25ed8aeb9c39 ("drm/bridge/synopsys: dsi: driver-specific configuration of phy timings") Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
-
- 17 10月, 2020 1 次提交
-
-
由 Sean Anderson 提交于
syslog_test.h is in test/log/, not include/ Fixes: 52d3df7f ("log: Allow LOG_DEBUG to always enable log output") Signed-off-by: NSean Anderson <seanga2@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
- 16 10月, 2020 13 次提交
-
-
https://gitlab.denx.de/u-boot/custodians/u-boot-marvell由 Tom Rini 提交于
- Fix Octeon SPI driver for Octeon TX2 - Fix and enhance Octeon watchdog driver - Misc minor enhancements to Octeon TX/TX2
-
由 Tom Rini 提交于
- Bring in the next round of dev_xxx cleanup patches.
-
由 Sean Anderson 提交于
Now that linux/compat.h does not define these macros, we do not need to undefine them. Signed-off-by: NSean Anderson <seanga2@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Sean Anderson 提交于
All users of these functions now include dm/device_compat.h directly. Signed-off-by: NSean Anderson <seanga2@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Tom Rini 提交于
Necessary for dev_xxx. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Necessary for dev_xxx. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Necessary for dev_xxx. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Sean Anderson 提交于
This driver doesn't use DM (in the correct places), so we use a device and not a udevice. We also need to include device_compat.h Signed-off-by: NSean Anderson <seanga2@gmail.com>
-
由 Sean Anderson 提交于
This was included, but was ifdef'd out. We also need dm.h for struct udevice. Signed-off-by: NSean Anderson <seanga2@gmail.com>
-
由 Sean Anderson 提交于
This header is necessary for the dev_xxx macros. Signed-off-by: NSean Anderson <seanga2@gmail.com>
-
由 Sean Anderson 提交于
Necessary for dev_xxx. Signed-off-by: NSean Anderson <seanga2@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Sean Anderson 提交于
Necessary for dev_xxx. Signed-off-by: NSean Anderson <seanga2@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Sean Anderson 提交于
Necessary for dev_xxx. Signed-off-by: NSean Anderson <seanga2@gmail.com>
-