- 21 4月, 2008 3 次提交
-
-
由 Matthias Fuchs 提交于
This patch adds two missing free()s. Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>
-
由 Wolfgang Denk 提交于
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 19 4月, 2008 5 次提交
-
-
由 Wolfgang Denk 提交于
Change env_get_char from a global function ptr to a function. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Guennadi Liakhovetski 提交于
This patch allows U-Boot to use buffered writes to the Spansion NOR flash installed on this board, and eliminates long delays in network transfers after the board startup. Also modify flash layout to embed main and redundant environment blocks in the U-Boot image. Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-
由 Guennadi Liakhovetski 提交于
This patch adds support for the MX31ADS evaluation board from Freescale, initialization code is copied from RedBoot sources, also provided by Freescale. Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-
- 18 4月, 2008 32 次提交
-
-
由 Anatolij Gustschin 提交于
Currently U-Boot crashes in ppc_4xx_eth_init on sequoia with cache enabled (TLB Parity exeption). This patch fixes the problem. Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Anatolij Gustschin 提交于
Currently U-Boot crashes on sequoia board in CPU POST if cache is enabled (CONFIG_4xx_DCACHE defined). The cache won't be disabled by change_tlb before CPU POST because there is an insufficient adress range check since CFG_MEM_TOP_HIDE was introduced. This patch tries to fix this problem. Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Shinya Kuribayashi 提交于
Current assembler codes are inconsistent in the way of register jump instruction usage; some use jr, some use j. Of course GNU as allows both usages, but as can be expected from `Jump Register' the mnemonic `jr' is more intuitive than `j'. For example, Linux doesn't have `j <reg>' usage at all. Signed-off-by: NShinya Kuribayashi <skuribay@ruby.dti.ne.jp>
-
由 Guennadi Liakhovetski 提交于
MC13783 is a multifunction IS with an SPI interface to the host. This driver handles the RTC controller in this chip. Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-
由 Guennadi Liakhovetski 提交于
This is an SPI driver for i.MX and MXC based SoCs from Freescale. So far only implemented and tested on i.MX31, can with a modified register layout and definitions be used for i.MX27, I think, MXC CPUs have similar SPI controllers too. Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-
-
由 Magnus Lilja 提交于
Correct the name of the i.MX31 Litekit and phyCORE boards in config files. Signed-off-by: NMagnus Lilja <lilja.magnus@gmail.com>
-
由 Mike Frysinger 提交于
Split the arch-specific logic out of the common go code and into a dedicated weak function called do_go_exec() that lives in cpu directories. This will need review from i386/nios people to make sure I didn't break them.
-
由 Mike Frysinger 提交于
Change the bootelf setup function into a dedicated weak function called do_bootelf_exec. This way ports can control the behavior however they like before/after calling the ELF entry point.
-
由 Ulf Samuelsson 提交于
Rearrange ARM boards in Makefile so that ARM926EJ-S boards are no longer under ARM92xT header. Signed-off-by: NUlf Samuelsson <ulf@atmel.com> Ack-By Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Ulf Samuelsson 提交于
This patch removes the board dependent parts from "drivers/mtd/dataflash.c". Each board relying on this, will have the appropriate code in a new file, "partition.c" in the board directory. board Makefiles updated to use the file. The dataflash partitions are aligned on sector/page boundaries. The CONFIG_NEW_DF_PARTITION was used to create named partitions This is now the default operation, and the CONFIG variable is removed. Signed-off-by: NUlf Samuelsson <ulf@atmel.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Vlad Lungu 提交于
With gcc 3.3.3 at least, compilation fails with Generating include/autoconf.mk gcc: compilation of header file requested make: *** [include/autoconf.mk] Error 1 since commit 16fe7775. Signed-off-by: NVlad Lungu <vlad@comsys.ro>
-
由 Marian Balakowicz 提交于
Before new uImage code was merged, bootm code allowed for the kernel image to get overwritten during decompresion. new uImage introduced a check for image overwrites and refused to boot the image that got overwritten. This patch restores the old behavior. It also adds a warning when the image overwriten is a multi-image file, because in such case accessing componentes other than the first one will fail. Signed-off-by: NMarian Balakowicz <m8@semihalf.com>
-
由 Marian Balakowicz 提交于
Set fdt_blob variable before its value is printed out. Signed-off-by: NMarian Balakowicz <m8@semihalf.com>
-
由 Jason Wessel 提交于
The cross compiler is responsible for providing the correct libraries and the logic to find the linking libraries. Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Bartlomiej Sieka 提交于
- document 'bootm_low' and 'bootm_size' environment variables - update inaccurate CFG_BOOTMAPSZ entry Signed-off-by: NBartlomiej Sieka <tur@semihalf.com>
-
由 Guennadi Liakhovetski 提交于
Restore logic reverted by commit commit 80767a6c Author: Peter Pearse <peter.pearse@arm.com> Date: Wed Sep 5 16:04:41 2007 +0100 Changed API name to coloured_led.h Removed code using deprecated ifdef CONFIG_BOOTBINFUNC Tidied other cpu/arm920t/start.S code Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-
由 Mike Frysinger 提交于
There are two NAND entries with ID 0xDC and this obviously causes problems. In the kernel, they punted the first entry, so we should do the same. See this upstream e-mail for more info: http://lists.infradead.org/pipermail/linux-mtd/2007-July/018795.htmlSigned-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Shinya Kuribayashi 提交于
Cache operations have to take line address (addr), not start_addr. I noticed this bug when debugging ping failure. Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com>
-
由 Martin Krause 提交于
Before the first call of ide_reset(), the level of the IDE reset signal on the TQM5200 is low (reset asserted). This patch sets the default value to high (reset not asserted). Currently this patch fixes no real problem, but it is cleaner to assert the reset signal only on demand, and not permanently. Signed-off-by: NMartin Krause <martin.krause@tqs.de>
-
由 Detlev Zundel 提交于
Signed-off-by: NDetlev Zundel <dzu@denx.de>
-
由 Detlev Zundel 提交于
The latter name with 13 users is already established, so we will use that. Signed-off-by: NDetlev Zundel <dzu@denx.de>
-
由 Martin Krause 提交于
According to the ata (ata5) specification the RESET- signal shall be asserted for at least 25 us. Without this patch, the RESET- signal is asserted on some boards for only < 1 us (e. g. on the TQM5200). This patch adds a general delay of 25 us to the RESET- signal. Without this patch a Platinum 4 GiB CF card is not recognised properly on boards with a TQM5200 (STK52xx, TB5200). Signed-off-by: NMartin Krause <martin.krause@tqs.de>
-
由 Sascha Laue 提交于
Signed-off-by: NSascha Laue <sascha.laue@liebherr.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
In function 'logbuff_init_ptrs': cmd_log.c:79: warning: pointer targets in assignment differ in signedness Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Gururaja Hebbar K R 提交于
Signed-off-by: Ngururaja hebbar <gururajakr@sanyo.co.in>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Guennadi Liakhovetski 提交于
These PCI IDs are required by the Linkstation platforms. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
-
由 Joakim Tjernlund 提交于
This avoids an early global data reference. Signed-off-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se>
-